ページ1に含まれる内容の要旨
K-CD01
CD-RECEIVER
INSTRUCTION MANUAL
© B64-2923-00/00 (M) (TKR)
ページ2に含まれる内容の要旨
Contents Safety precautions 3 Menu system 15 WARNING Function Set CAUTION Contrast Adjustment NOTE Selecting display mode Touch Sensor Tone Notes 5 Security Code Built-in Amp Mute Setting About CDs 6 Security Indicator Manual Clock Adjustment General features 7 Tuning Mode Power Auto Memory Entry Selecting the Source Text Scroll Volume B.M.S. (Bass Management System) Audio Control B.M.S. Frequency Offset Defeat Setting AMP Control Switching Display Basic Operations of remote 19 Subwoofer Output
ページ3に含まれる内容の要旨
Safety precautions 2WARNING 2CAUTION To prevent injury or fire, take the To prevent damage to the machine, take following precautions: the following precautions: • Insert the unit all the way in until it is fully locked • Make sure to ground the unit to a negative 12V in place. Otherwise it may fall out of place when DC power supply. jolted. • Do not open the top or bottom covers of the unit. • When extending the ignition, battery, or ground • Do not install the unit in a spot exposed to dire
ページ4に含まれる内容の要旨
Safety precautions About CD players/disc changers NOTE connected to this unit • If you experience problems during installation, KENWOOD disc changers/ CD players released in consult your Kenwood dealer. 1998 or later can be connected to this unit. • If the unit fails to operate properly, press the Reset Refer to the catalog or consult your Kenwood button. The unit returns to factory settings when dealer for connectable models of disc changers/ the Reset button is pressed. If the unit stil
ページ5に含まれる内容の要旨
Notes Cleaning the Unit The marking of products using lasers If the faceplate of this unit is stained, wipe it with a (Except for some areas) dry soft cloth such as a silicon cloth. If the faceplate is stained badly, wipe the stain off CLASS 1 with a cloth moistened with neutral cleaner, then wipe neutral detergent off. LASER PRODUCT The label is attached to the chassis/case and says • Applying spray cleaner directly to the unit may affect its that the component uses laser beams that have
ページ6に含まれる内容の要旨
About CDs Handling CDs Removing CDs • Don’t touch the recording surface of the CD. When removing CDs from this unit pull them out horizontally. CDs that can’t be used • CDs that aren’t round can’t be used. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Don’t stick tape etc. on the CD. • CDs with coloring on the recording surface or that Also, don’t use a CD with tape stuck on it. are dirty can’t be use
ページ7に含まれる内容の要旨
General features AUDIO FM DISP 4 ¢ SRC/VOL AM/SW Power Volume Turning ON the Power Increasing Volume Press the [SRC] button. Turn the [VOL] knob clockwise. Turning OFF the Power Decreasing Volume Press the [SRC] button for at least 1 second. Turn the [VOL] knob counterclockwise. Selecting the Source Press the [SRC] button. Source required Display Tuner "Tuner" CD "Compact Disc" External disc (Optional accessory) "CD CH" TV (Optional accessory) "TV" Auxiliary input (Optional accessory) "AUX EXT"
ページ8に含まれる内容の要旨
General features Audio Control Switching Display Switching the information displayed. 1 Select the source for adjustment Press the [DISP] button. Press the [SRC] button. Each time the button is pressed the display 2 Enter Audio Control mode switches as shown below. Press the [AUDIO] button. In Tuner source "Audio CTRL" is displayed. Information Display 3 Select the Audio item for adjustment Frequency Press the [FM] or [AM] button. Clock "Clock" Each time the button is pressed the items that LX
ページ9に含まれる内容の要旨
Tuner/TV control features SRC FM CRSC 1 – 6 FNC 4 ¢ AM ST indicator Band display Frequency display Preset station number Function of remote Tuning Direct Access Tuning Selecting the station. Entering the frequency and tuning. 1 Select tuner source Press the [SRC] button. 1 Select the band Select the "Tuner" display. Press the [FM] or [AM] button. 2 Select the band 2 Enter Direct Access Tuning mode Press the [FM] or [AM] button. Press the [DIRECT] button on the remote. Each time the [FM] button i
ページ10に含まれる内容の要旨
Tuner/TV control features Station Preset Memory Preset Tuning Putting the station in the memory. Calling up the stations in the memory. 1 Select the band 1 Select the band Press the [FM] or [AM] button. Press the [FM] or [AM] button. 2 Select the frequency to put in the memory 2 Call up the station Press the [4] or [¢] button. Press the desired [1] — [6] button. 3 Put the frequency in the memory Press the desired [1] — [6] button for at least 2 seconds. CRSC (Clean Reception System The preset
ページ11に含まれる内容の要旨
Function of LX BUS Television Function of LX BUS Television Function of remote TV Tuning Direct TV Tuning The TV channel of a connected LX BUS Television Entering the TV channel and tuning. (optional accessory) can be selected. The action depends on the setting of the 1 Select the TV band connected LX BUS Television. Refer to the user Press the [FM] button. instruction of the LX BUS Television for details. 2 Enter Direct TV Tuning mode 1 Select TV source Press the [DIRECT] button on the remot
ページ12に含まれる内容の要旨
CD/External disc control features 0 FM SCRL SCAN RDM REP M.RDM 38 4 ¢ SRC AM CD indicator Track number Track time Playing CD Playing External Disc Playing discs set in the optional accessory disc When a CD is inserted player connected to this unit. Press the [SRC] button. Press the [SRC] button. Select the "Compact Disc" display. Select the display for the disc player you want. Display examples: • When a CD is inserted, the "CD" indicator is ON. Display Disc player Pause and play "CD2" CD playe
ページ13に含まれる内容の要旨
Function of disc changers with remote Fast Forwarding and Reversing Direct Disc Search Fast Forwarding Doing Disc Search by entering the disc number. Hold down on the [¢] button. Release your finger to play the disc at that point. 1 Enter the disc number Press the number buttons on the remote. Reversing Hold down on the [4] button. 2 Do Disc Search Release your finger to play the disc at that point. Press the [DISC+] or [DISC–] button. Canceling Direct Disc Search Press the [38] button. Track Se
ページ14に含まれる内容の要旨
CD/External disc control features Random Play Playing all the songs on the disc in random order. Press the [RDM] button. Each time the button is pressed Random Play turns ON or OFF. When it’s ON, "Random" is displayed. • When the [¢] button is pressed, the next song select starts. • During Random play, it switches to "RDM" display if the play time is displayed. Function of disc changer Magazine Random Play Play the songs on all the discs in the disc changer in random order. Press the [M.RDM
ページ15に含まれる内容の要旨
Menu system FM 1–4 FNC 4 ¢ AM Function Set 4 Exit Function Set mode Press the [FNC] button. Setting during operation beep sound etc. functions. The Function Set basic operation method is • When other items that are applicable to the basic explained here. The reference for the Function operation method above are displayed afterwards their setting content chart is entered. (Normally the items and their setting content is after this uppermost setting in the chart is the original setting.) ope
ページ16に含まれる内容の要旨
Menu system In Standby mode In Standby mode Contrast Adjustment Security Code Adjusting the display contrast. Because authorization by the Security Code is required when it’s removed from the vehicle, Display and Setting personalizing this unit is by using the Security "Contrast 1" Code is a help in preventing theft. "Contrast 7" (Original setting) • When the Security Code function is activated, the code "Contrast 11" can’t be changed and the function can’t be released. Note
ページ17に含まれる内容の要旨
In Standby mode In Tuner mode Built-in Amp Mute Setting Tuning Mode Toggles ON or OFF the mute control on the built- Sets the tuning mode. in amplifier. Tuning mode Display Operation Turning ON this control enhances the preout Auto seek "AUTO 1" Automatic search for a station. quality. Preset station seek "AUTO 2" Search in order of the stations in the Preset memory. Display Setting Manual "Manual" Normal manual tuning control. "AMP Mute Off" The built-in amplifier activates. "AMP Mute On" T
ページ18に含まれる内容の要旨
Menu system In Tuner/CD/External disc control mode When LX AMP unit connecting B.M.S. (Bass Management System) AMP Control Adjust the bass boost level of the external You can control the LX AMP connected to the amplifier using the main unit. unit. Display Setting 1 Select AMP Control mode "AMP Bass FLT" Bass boost level is flat. Press the [FM] or [AM] button. "AMP Bass +6" Bass boost level is low (+6dB). Select the "AMP Control" display. "AMP Bass +12" Bass boost level is mid (+12dB). 2 Enter
ページ19に含まれる内容の要旨
Basic Operations of remote 4/¢ FM/AM/DISC+/DISC– 38 [0] — [9] DIRECT/OK Not Used ATT VOL. SRC Loading and Replacing the battery Basic operations Use one lithium battery (CR2025). [VOL.] buttons Insert the batteries with the + and – poles aligned Adjusting the volume. properly, following the illustration inside the case. [SRC] button Each time the button is pressed the source switches. Keep on slide For the source switching order refer to 'Selecting the Source' (page 7). [ATT] button Turning t
ページ20に含まれる内容の要旨
Basic Operations of remote In Tuner source [FM]/ [AM] buttons Select the band. Each time the [FM] button is pressed it switches between the FM1, FM2, and FM3 bands. [4]/ [¢] buttons Tune up or down band. [0] — [9] buttons Press buttons [1] — [6] to recall preset stations. [DIRECT]/ [OK] button Enters and cancels the 'Direct Access Tuning' (page 9) mode. In Disc source [4]/ [¢] buttons Doing track forward and backward. [DISC+]/ [DISC–] buttons Doing disc forward and backward. [38] button Each t
