CD-RECEIVER KDC-X689 INSTRUCTION MANUAL Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product.
ページ2に含まれる内容の要旨
Contents Safety precautions 4 CD/Audio file/External disc control features 23 Notes 5 Playing CD & Audio file Playing External Disc Warning 6 Fast Forwarding and Reversing Track/File Search About CDs 7 Disc Search/Folder Search Direct Track/File Search About AAC, MP3 and WMA 8 Direct Disc Search Track/File/Disc/Folder Repeat General features 9 Scan Play Power Random Play Hiding the Control Panel Magazine Random Play Selecting the Source Disc Random Play Volume Folder Select Attenuator Switching
ページ3に含まれる内容の要旨
Basic Operations of remote control 36 Accessories/ Installation Procedure 39 Connecting Wires to Terminals 40 Installation 41 Removing the Unit 43 Troubleshooting Guide 44 Specifications 47 The "AAC" logo is trademark of Dolby Laboratories. English | 3
ページ4に含まれる内容の要旨
Safety precautions About CD players/disc changers 2WARNING connected to this unit To prevent injury or fire, take the Kenwood disc changers/ CD players released in following precautions: 1998 or later can be connected to this unit. • To prevent a short circuit, never put or leave any Refer to the catalog or consult your Kenwood metallic objects (such as coins or metal tools) dealer for connectable models of disc changers/ inside the unit. CD players. Note that any Kenwood disc changers/ C
ページ5に含まれる内容の要旨
Notes • If you experience problems during installation, Before using this unit for the first time consult your Kenwood dealer. This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the • If the unit fails to operate properly, press the Reset (page 35). button to restore factory settings. • Press the reset button if the disc auto changer fails to operate correctly. Normal operation should be restored. About SIRIUS S
ページ6に含まれる内容の要旨
Notes 2Warning About DAB Tuner control 2CAUTION Refer to A group on the Instruction manual of DAB Use of controls or adjustments or performance of Tuner KTC-9090DAB (optional accessory) for the procedures other than those specified herein may control method of DAB Tuner function. result in hazardous radiation exposure. However, the following control methods of the In compliance with Federal Regulations, following function for this unit may be differed from the are reproductions of labels on,
ページ7に含まれる内容の要旨
About CDs Handling CDs Removing CDs • Do not touch the recording surface of the CD. When removing CDs from this unit pull them out horizontally. CDs that cannot be used • CDs that are not round cannot be used. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Do not stick tape etc. on the CD, or use a CD with • CDs with coloring on the recording surface or CDs tape stuck on it. that are dirty cannot be u
ページ8に含まれる内容の要旨
About AAC, MP3 and WMA The playable AAC/MP3/WMA file (hereafter called The maximum number of characters for Audio file) and the media format has the following display limitation. The Audio file, which is not comforming File/Folder name: 128 characters to the specification, may not play normally, or the MP3 ID3 Tag/ WMA Contents property: file and folder names may not display correctly. 30 characters AAC song information: 60 characters • Attach the correct extension for the Audio file (AAC
ページ9に含まれる内容の要旨
General features ATT ANG VOL Q/MENU SRC Control knob FM1-6ch 98.1 12:34 01-Jan-05 Sat Power Hiding the Control Panel Prevents tampering with the unit while your car is Turning ON the Power being serviced etc. Turn the vehicle ignition ON. The control panel appears. Hiding the control panel Press the [SRC] button for at least 1 second. Turing OFF the Power When the time set in Turn the vehicle ignition OFF or press the (page 31) lapses, the panel is hidden
ページ10に含まれる内容の要旨
General features Selecting the Source Sound setting Display User memory "User" Press the [SRC] button. Rock "Rock" Pops "Pops" Source required Display Easy "Easy" SIRIUS tuner (Optional accessory) "SIRIUS" Top 40 "Top 40" Tuner or HD Radio (Optional accessory) "TUNER" or "HD RADIO" Jazz "Jazz" CD "Compact Disc" Natural "Natural" External disc (Optional accessory) "CD Changer" Auxiliary input "AUX" Auxiliary input (Optional accessory) "AUX EXT" • User memory: The values set on the
ページ11に含まれる内容の要旨
3 Select the Detail Audio item to adjust Audio Control Press the [VOL] knob. 1 Select the source to adjust Each time you press the knob, the item to be Press the [SRC] button. adjusted alternates between the items shown in the table below. 2 Enter Audio Control mode 4 Adjust the Detail Audio item Press the [VOL] knob. Turn the [VOL] knob. 3 Select the Basic Audio item to adjust Bass level Press the [VOL] knob. Adjustment Item Display Range Each time you press the knob, the item to be Bass Ce
ページ12に含まれる内容の要旨
General features • Y ou can use the Dual Zone System with the Auxiliary Audio Setup input sources listed below. Setting the Sound system, such as Cross over - Internal auxiliary input Network. 5 Exit Audio Setup mode Press [VOL] knob for at least 1 second. 1 Select the source to adjust Press the [SRC] button. 2 Enter Audio Setup mode Press the [VOL] knob for at least 1 second. Subwoofer Output 3 Select the Audio Setup item to adjust Turning the Subwoofer output ON or OFF. Press the [VOL] knob.
ページ13に含まれる内容の要旨
1 Upper text display part 2 Middle text display part 3 Lower text display part 4 Text display part 5 Graphic display part • Y ou can display the information that will be shown in the Upper text display part, the Lower text display part or the Level meter display part according to the setting of Display mode. Refer to the following pages for how to select the mode. Display Type AB C Upper 1 page 15 —— Middle 2 page 15 —— Lower 3 page 15 —— Text 4 — page 14 — Graphic 5 page 18 page 18 — 3 Exit
ページ14に含まれる内容の要旨
General features Display Type B In Auxiliary input source Text Selection for Display Information Display Auxiliary input name "SRC Name" Selecting the text display. Clock "Clock" 1 Enter display control mode Date "Date" Press the Control knob for at least 1 second. In SIRIUS tuner source "Display Control" is displayed. Information Display 2 Select the display Type Channel Name "Channel Name" Press the Control knob. Song Title "Song Title" Select the "Display Type B" display. Artist Name "Artist
ページ15に含まれる内容の要旨
Display Type C Text Display Switching Changing the text display. 1 Enter display control mode Press the Control knob for at least 1 second. "Display Control" is displayed. 2 Select the display Type Press the Control knob. Select the "Display Type C" display. 3 Select the text display part Push the Control knob towards [FM] or [AM]. The selected text display part blinks. Select the text Push the Control knob towards [4] or [¢]. Refer to the table described later for setting items. 4 Exit Displ
ページ16に含まれる内容の要旨
General features The text display in the Upper text display In SIRIUS tuner source part Information Display Channel Name "Channel Name" In Tuner source Song Title "Song Title" Information Display Artist Name "Artist Name" Station name "BAND+ch+SNPS"* Composer name "Composer Name" Frequency "BAND+ch+FREQ" Category Name "Category Name" Spectrum Analyzer & Clock "Speana/Clock" Label Name "Label Name" Date "Date" Comment "Comment" Band & Channel Number "Channel Number" In CD & External disc source S
ページ17に含まれる内容の要旨
In Standby Information Display Clock "Clock" Date "Date" Blank "Blank" In Auxiliary input source Information Display Spectrum Analyzer & Clock "Speana/Clock" Date "Date" Blank "Blank" In HD Radio source Information Display Spectrum Analyzer & Clock "Speana/Clock" Date "Date" Blank "Blank" Title "Title"* In SIRIUS tuner source Information Display Spectrum Analyzer & Clock "Speana/Clock" Date "Date" Blank "Blank" Channel Name "Channel Name" Song Title "Song Title" Artist Name "Artist Name" Compose
ページ18に含まれる内容の要旨
General features The text display in the Lower text display In HD Radio source part Information Display Indicator "Indicator" In Tuner source Spectrum Analyzer & Clock "Speana/Clock" Information Display Date "Date" Indicator "Indicator" Blank "Blank" Spectrum Analyzer & Clock "Speana/Clock" Title "Title"* Date "Date" Blank "Blank" In SIRIUS tuner source In CD & External disc source Information Display Indicator "Indicator" Information Display Spectrum Analyzer & Clock "Speana/Clock" Indicator "I
ページ19に含まれる内容の要旨
4 Select the graphic/ spectrum analyzer 7 Select the characters display part display Push the Control knob towards [FM] or [AM]. Push the Control knob towards [4] or [¢]. • Enter characters by using a remote control with Each time you push the knob, the display numbers buttons. alternates between the display names shown in Example: If you are entering "DANCE". the table below. Character Button Times pressed Graphic display/ Spectrum Analyzer display "D" [3] 1 Wallpaper 1 – 5 "A" [2] 1 Spe
ページ20に含まれる内容の要旨
General features Theft Deterrent Faceplate TEL Mute The faceplate of the unit can be detached and The audio system automatically mutes when a taken with you, helping to deter theft. call comes in. Removing the Faceplate When a call comes in "CALL" is displayed. 1 Turn the ignition OFF or press the [SRC] The audio system pauses. button for at least 1 second. The power turns OFF and the faceplate slides Listening to the audio during a call open. Press the [SRC] button. The "CALL" display disapp
