ページ1に含まれる内容の要旨
MULTIPLE COMPACT DISC PLAYER
CD-224M/DPF-J5010
INSTRUCTION MANUAL
KENWOOD CORPORATION
This unit is designed for home use only. If the unit is
used in a location other than at home, such as in a
shop (for commercial use), in a car or in a ship, etc.,
and is damaged, a service fee may be charged even
during the warranty period.
This instruction manual is used for two models.
Model availability and features (functions) may differ
depending on the country and sales area.
COMPACT
DIGITAL AUDIO
B60-35
ページ2に含まれる内容の要旨
Introduction Introduction CD-224M/DPF-J5010 (En) Caution : Read this section carefully to ensure safe operation. Before applying power 2 Units are designed for operation as follows. U.S.A. and Canada.................................. AC 120 V only Europe and U.K. ............................................... AC 230 V only Australia .................................................. AC 240 V only *Other countries ............. AC 110-120 / 220-240 V switchable *AC voltage selection AC voltage s
ページ3に含まれる内容の要旨
Introduction CD-224M/DPF-J5010 (En) Special features 3 CD player with 200-disc changer This unit can accommodate up to 200 discs and can be used like a home jukebox. CD-TEXT support The text information (disc title, track titles, names of the artists, songwriters, composers, etc.) recorded on the CDs can be easily called and displayed in alphanumerics. (Some Japanese words and text may not be displayed.) % Title name registrable In case of a disc not corresponding to CD-TEXT, you can register a
ページ4に含まれる内容の要旨
Introduction CD-224M/DPF-J5010 (En) Unpacking Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost. 4 Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately. If your unit was shipped to you directly, notify the shipping company without delay. Only the consignee (the person or company receiving the unit) can file a claim against the carrier for shipping damage. We recommen
ページ5に含まれる内容の要旨
Introduction CD-224M/DPF-J5010 (En) 5 Types of discs playable on this unit Ö With CD-G (CD Graphics) discs, this unit can play only the audio part. Disc Type Disc Size ÖAn 8 cm CD cannot be played back. CD (ordinary Compact Disc) 12 cm Audio part of CDV (CD with video) 12 cm Disc handling precautions Never play a cracked or warped disc Handling During playback, the disc rotates at high speed in the player. Hold compact discs so that you do not Therefore, to avoid danger, n
ページ6に含まれる内容の要旨
System connections System connections CD-224M/DPF-J5010 (En) Make connections as shown below. Malfunction of microcomputer When connecting the related system components, refer 6 If operation is not possible or erroneous display also to the instruction manuals of the related components. appears even though all connections have been Do not plug in the power lead until all connections are com- made properly, reset the microcomputer refer- pleted. ring to “In case of difficulty”. Ú Be sure to use th
ページ7に含まれる内容の要旨
System connections CD-224M/DPF-J5010 (En) Connection to digital amplifier or MD 7 Connect the DIGITAL OUT (OPTICAL) jack to the digital input jack of the amplifier, DAT recorder, MD recorder, etc., using an optical Optical fiber cable fiber cable which are commercially available in audio stores. ÖWhen using an optical fiber cable to connect this unit to a digital amplifier, insert the plug straight into the jack until a snap sound is heard. ÖBe careful not to bend, coil, or bundle the optical fi
ページ8に含まれる内容の要旨
Controls and indicators CD-224M/DPF-J5010 (En) 8 (The displays given in this manual are approximations only. They may differ Play indicator Text information display from what actually appears on the display.) ¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
Pause indicator DISPLAY 1 1 2 3 4 5 67 8 9 0 ! MULTIPLE COMPACT DISC PLAYER 0
PUSH OPEN TIMER PLAY OFF ON 6 DISC SKIP STANDBY STANDBY DISPLAY CONFIRM 7 POWER RANDOM REPEAT 4 ¢
200 DISC LOADING WITH TWIN PICK UP MECHANISM @ 1POWER key/STANDBY indicator (F
ページ9に含まれる内容の要旨
Operation of remote control unit CD-224M/DPF-J5010 (En) The keys with the same name as those on the main unit operate the same way as on the main unit. The keys marked * are provided only on the remote control unit. 9 1POWER key 6Keys related to program and file 2Input keys for numbers and letters * registration * MODE key Used for selection of disc numbers and track Used for music type file and title name numbers, as well as for title name registration. CONFIRM POWER 1 registration and playback
ページ10に含まれる内容の要旨
Preparation Preparation CD-224M/DPF-J5010 (En) Up to 200 CDs can be loaded in the carousel. Disc exchange also is possible during playback. 10 Never let your hand or any object enter inside the unit. : Keys and controls used in the operations described on this page. Loading discs in the carousel Switch power ON. 1 Press the POWER ( ) key. STANDBY POWER Open the door panel toward the front. 2 Press PUSH OPEN at the right top Ö Do not place any object on the open door panel. of the door panel. Loa
ページ11に含まれる内容の要旨
Preparation CD-224M/DPF-J5010 (En) 11 Disc replacement Discs can be replaced with the same procedure as “Loading discs in the carousel”. In stopped condition, all discs can be exchanged. However, when the door panel is opened while “DISC DETEC- TION” is being displayed, it may not be possible to remove the disc which had been played. Accordingly, wait for the “DISC DETECTION” indication to go out before opening the door panel. When the disc information has been read in at the time of regis- trat
ページ12に含まれる内容の要旨
Normal play (TRACK mode) (TRACK mode) Normal play CD-224M/DPF-J5010 (En) 12 Preparation ÖLoad discs into the carousel. 0 : Keys and controls used in the operations described on this page. Playing tracks in order from track No.1 Use the following procedure to play a CD in the original order of tracks from track No.1. Select the disc. 1 ÖEach press of a key increases (or decreases)the disc number. Holding the key depressed varies the disc numbers successively. ° DISC SKIP 5 ÖWhen the disc corresp
ページ13に含まれる内容の要旨
Normal play (TRACK mode) CD-224M/DPF-J5010 (En) Direct disc selection 13 1 Press the DISC SELECTOR key. Press the numeric keys in the following order... DISC SELECTOR Disc No. 63 : 63 Disc No. 100 : 1)) Within 8 seconds! 2 Input the disc number. How to input numeric values ABC DEF 1 2 3 : Keys and controls used in the operations described on this page. As this unit requires input of large numeric values, it adopts a GHI JKL MNO different input method from other KENWOOD products. How- 4 5 6 ever,
ページ14に含まれる内容の要旨
Normal play (TRACK mode) CD-224M/DPF-J5010 (En) 14 Preparation ÖLoad discs into the carousel. 0 : Keys and controls used in the operations described on this page. Playback from desired track Select the disc. 1 1Select the disc number. Display when disc No. 123 is selected ° DISC SKIP 5 Previous disc Next disc D312 13:2 ÖThe disc number can be selected directly by using the DISC SELECTOR Within 8 seconds! and numeric keys in place of the DISC SKIP keys. ÖWhen the disc corresponds to CD-TEXT, or w
ページ15に含まれる内容の要旨
Displays CD-224M/DPF-J5010 (En) Displays scrolling Some track titles contain so much text information that the full 15 titles will not fit on the display. In cases like this, the letters on the display move from right to left so that the non-visible part of the title is revealed. This type of display movement is known as “scrolling display.” Display example |Scroll display D3 12GOODLTO DF3AI SHON... D3 12FAISHNODEH : Keys and controls used in the operations described on this page. Track title
ページ16に含まれる内容の要旨
Programming tracks in desired order (PGM mode) (PGM mode) Programming tracks in desired order CD-224M/DPF-J5010 (En) Use the following procedure to select desired tracks (up to 32 tracks) from up to 200 discs and program them in the 16 desired order. Preparation ÖLoad discs into the carousel. 0 ÖSet the CD player to stop mode. : Keys and controls used in the operations described on this page. Press so that the PGM indicator lights. 1 CHARACTER/ P.MODE PGME 3SELTCD1 ICS Select the disc. 2 1Selec
ページ17に含まれる内容の要旨
Programming tracks in desired order (PGM mode) CD-224M/DPF-J5010 (En) 17 : Keys and controls used in the operations described on this page. To check the programmed tracks SPACE/ P0 GM1DED2000DT3 CHECK Ö Each time the key is pressed, the program No. (P-NO) and the disc No. are displayed. ÖThe previous display resumes in a few seconds. To add a track to the program 1Set the CD player to stop mode. Ö When a track No. is entered, the track will be added to the end of the existing program. 2 Perform
ページ18に含まれる内容の要旨
Programming tracks in desired order (PGM mode) (REPEAT mode) Repeated playback CD-224M/DPF-J5010 (En) 18 Preparation ÖLoad discs into the carousel. 0 : Keys and controls used in the operations described on this page. To repeat only the desired tracks 1Program the desired tracks by per- ÖUp to 32 tracks can be programmed by repeating steps 1. forming steps 1 to 3 of “Program- ming tracks in desired order”. ^ 2Switch REPEAT ON. PGRE EPTAO2DN T30 REPEAT Ö The current status is displayed when the k
ページ19に含まれる内容の要旨
Programming tracks in desired order (PGM mode) (RANDOM mode) Playback in a random order CD-224M/DPF-J5010 (En) Use the following procedure to activate random playback which selects a track at random after every track. This fea- 19 ture may allow you to play CDs for long hours without getting tired of. Preparation ÖLoad discs into the carousel. 0 : Keys and controls used in the operations described on this page. Check that the unit is in the normal play TRACK 1 mode. # Select discs. 2 To select
ページ20に含まれる内容の要旨
Registration of Title Name Registration of Title Name CD-224M/DPF-J5010 (En) For discs not corresponding to CD-TEXT, a title name can be given to the disc (max. 25 characters). Operation is pos- 20 sible also when the door panel is open. It is convenient to register titles while discs are being inserted. Preparation ÖLoad discs into the carousel. 0 ÖSet the CD player to stop mode. ÖCheck that the unit is in the normal play TRACK mode. # : Keys and controls used in the operations described on thi
