Kenwood DUAL DIN SIZED CD RECEIVER DPX-MP5110Uの取扱説明書

ページ1に含まれる内容の要旨

DPX-MP5110U
DPX-MP4110
DPX-MP3110
DUAL DIN SIZED CD RECEIVER
INSTRUCTION MANUAL


© B64-3964-00/00 (MW)

ページ2に含まれる内容の要旨

Contents Before use 3 Appendix 18 Basic Operation 4 Accessories/ Installation Procedure 20 General functions Connecting Wires to Terminals 21 Tuner functions Disc & Audio file play functions Installation 22 Cassette play functions Troubleshooting Guide 23 General Operation 7 Audio Control Specifications 25 Adjusting the detail of Audio Control Audio Setup Speaker Setting Sound Enhancer Select Sound Enhancer Control Spectrum Analyzer Select Illumination Color Select User Color Setting Display Sw

ページ3に含まれる内容の要旨

Before use • If you experience problems during installation, 2WARNING consult your Kenwood dealer. To prevent injury or fire, take the following • When you purchase optional accessories, check with precautions: your Kenwood dealer to make sure that they work • To prevent a short circuit, never put or leave any with your model and in your area. metallic objects (such as coins or metal tools) inside • The characters which can be displayed by this unit the unit. are A-Z 0-9 @ " ‘ ` % & * + –

ページ4に含まれる内容の要旨

Basic Operation DSI indicator Display Disc slot DPX-MP5110U [ ] [SE] [SRC] [M.JOG] [COL] [ ] USB Terminal Auxiliary input Control knob [ATT] [1] [2] [3] [4] [5] [6] Muting volume upon reception of phone call General functions When there is a call, “CALL” is displayed and the audio Power/Source Select button [SRC] system is paused. Turns on the power. When the call ends, “CALL” disappears and the audio When the power is on, the source switches between system comes back on. Tuner (“TUNER”) , T

ページ5に含まれる内容の要旨

: Indicates the button etc. to operate. Disc & Audio file play functions Folder search Control knob Changes the folder containing the audio fi le when Disc play Disc slot pushing toward up or down. Starts playing when a disc is inserted. When a CD is inserted, the indicator is ON. Select mode [M.JOG] After pressing this button, you can quickly search ⁄ songs with the control knob. See (page • 3 inch (8 cm) CD cannot be used. Attempt to insert using 12) for details. an adap

ページ6に含まれる内容の要旨

: Indicates the button etc. to operate. Basic Operation Cassette tape slot DSI indicator Display Disc slot [ ] DPX-MP4110 [SE] [SRC] [M.JOG] [COL] [ ] Ta [ pe ] [ATT] [1] [2] [3] [4] [5] [6] Auxiliary input Control knob Cassette play functions Dolby B NR [1] When Dolby B NR is ON, “B NR” indicator is ON. Cassette play Cassette tape slot Starts playing when a cassette tape is inserted. Scan play [2] When a Cassette is inserted, the indicator is ON. Successively plays the intro of the

ページ7に含まれる内容の要旨

General Operation Audio Control Adjusting the detail of Audio Control You can adjust following Audio Control items ; Among the Basic Audio items, you can adjust the Bass level, Middle level, and Treble level in detail. Adjustment Item Display Range Bass level Rear volume “R-VOL” 0 — 35 Subwoofer level “SW L” –15 — +15 Adjustment Item Display Range System Q “User”/“Rock”/ User setting/Rock/Pops/Easy/ Bass Center Frequency ”BasF” 40/50/60/70/80/100/ “Pops”/“Easy”/ Top 40/Jazz/Natural 120/150 Hz

ページ8に含まれる内容の要旨

General Operation Audio Setup Speaker Setting You can set Sound system, such as follows; Fine-tuning so that the System Q value is optimal when setting the speaker type as follows; Adjustment Item Display Range Front High Pass Filter “HPF” Through/40/60/80/100/120/ Speaker type Display 150/180/220 Hz OFF “SP Off” Rear High Pass Filter “HPR” Through/40/60/80/100/120/ For 5 & 4 in. speaker “SP 5/4” 150/180/220 Hz For 6 & 6x9 in. speaker “SP 6*9/6” Low Pass Filter “LPF” 50/60/80/100/120/Through

ページ9に含まれる内容の要旨

Sound Enhancer Control ⁄ • Scan of Spectrum Analyzer: Adjusts each function of Sound effect individually. The items from “PeakHold” to “Jump” are displayed in sequence. 1 Enter the Sound Effect Control mode Press the [SE] button for at least 1 second. “SE CTRL” is displayed. 2 Select the Sound effect item for adjustment Illumination Color Select Push the Control knob towards right or left. Select the illumination color for display, buttons 3 Adjust the Sound effect item and control knob. Push

ページ10に含まれる内容の要旨

General Operation In Tape source User Color Setting Information Display Adjust the illumination color with R(Red), G(Green), Play time (Tape counter) “Counter” B(Blue) setting. Adjusted set value is memorized in Clock “Clock” the of User setting area. Graphic “Graphic” 1 Select the item to adjust and select “USER” See step1 to step3 of In Standby/ Auxiliary input source (page 9) for detail. Information Display Source name “SRC Name” 2 Ent

ページ11に含まれる内容の要旨

Tuner Operation Auto Memory Entry Frequency Step Setting Putting stations with good reception in the memory Changing the tuning frequency step. automatically. The original setting is FM band 50 kHz, and AM band 9 kHz. 1 Select the band for Auto Memory Entry Push the Control knob towards up or down. 1 Turn the power OFF Press the [SRC] button for at least 1 second. 2 Enter Menu mode Press the [M.JOG] button for at least 1 second. 2 Switch the frequency step “Menu” is displayed. While pressing th

ページ12に含まれる内容の要旨

Music disc/Audio fi le Operation Function of disc changers with remote control Play Functions of Disc Changer Direct Disc Search While a disc in the disc changer is being played, the following play functions can be used. Doing Disc Search by entering the disc number. Playing the Current Song or Disc Repeatedly. 1 Enter the disc number (Repeat play) Press the number buttons on the remote Press the [4] button. control. Pressing the button repeatedly selects Track Repeat 2 Do Disc Search play on

ページ13に含まれる内容の要旨

Cassette Operation Function of Music CD DPSS with the Remote control Track Select Designating the music to be skipped with the remote control number buttons. Select the song you want to listen to by turning the control knob. 1 Designate the music to skip Press number buttons on the remote. 1 Enter Multi Jog Select mode Press the [M.JOG] button. 2 Skipping to a later music “M. Jog On” is displayed. Press the [¢] button. Displays the current music No. Skipping to a previous music 2 Select the m

ページ14に含まれる内容の要旨

Menu Operation Menu System : Can be set during Tuner reception. : Can be set while accessing AUX source. Set up the following functions; — : Can be set during all sources. Display Setting Setting overview Source 1 Enter Menu mode “Code Set” Refer to Sets security code. Press the [M.JOG] button for at least 1 second. page 14 “Menu” is displayed. — “I-EFCT” 0/1*/2/3 Set the illumination color effect. 2 Select the Menu item (page 19) Push the Control knob towards up or down. “Beep” On*/Of

ページ15に含まれる内容の要旨

6 Confirm the Security Code 3 Adjust the time Press the Control knob for at least 3 seconds. Push the control knob towards up or down to When “RE-Enter” is displayed, “Code” is also adjust the hours and right or left to adjust the displayed. minutes. 7 Do the step 3 through 6 step operation, and 4 Exit Clock adjustment mode reenter the security code. Press the [M.JOG] button. “Approved” is displayed. The Security Code function activates. ⁄ Auxiliary Input Display Setting • If you enter a Code

ページ16に含まれる内容の要旨

Menu Operation Basic Operations of remote control Demonstration mode Setting SRC VOL Turning the demonstration mode ON/OFF. SRC ATT ATT 1 Select Demonstration item during Menu mode VOL AUD Select the “DEMO” display. AUD For how to select menu items, refer to

(page 14). FM/AM/+/– 2 Set the Demonstration mode Press the Control knob for at least 2 second. DIRECT 2-ZONE Pressing this button for 2 seconds or longer toggles the setting between ”On” and ”Off”. 0 — 9 3 Exit Demonstration

ページ17に含まれる内容の要旨

Dual Zone control ⁄ About [ ] This button is used when Bluetooth HANDS FREE Dual zone system on and off [2-ZONE] BOX is connected. For more information, refer to the instruction manual of Bluetooth HANDS FREE BOX. Rear channel volume control [5]/ [∞] ¤ In Tuner source • Do not set the remote control in hot places such as on the dashboard. Band select [FM]/[AM] Loading and Replacing the battery Station select [4]/[¢] Use two “AA”/ “R6”-size batteries. Slide the cover while pressing downwa

ページ18に含まれる内容の要旨

Appendix About Audio file About USB device • Playable Audio file • When the USB device is connected to this unit, AAC-LC (.m4a), MP3 (.mp3), WMA (.wma) it can be charged up provided that this unit is powered. • Playable disc media CD-R/RW/ROM • Install the USB device in the place where it will not prevent you from driving your vehicle properly. • Playable disc file format ISO 9660 Level 1/2, Joliet, Romeo, Long file name. • You cannot connect a USB device via a USB hub and Multi Card R

ページ19に含まれる内容の要旨

Menu Glossary For operating KCA-BT100 • SWPRE (Switching Preout) To control KCA-BT100, operate as follows; Swit ches the preout between rear output (“R”) and To make setting for , subwoofer output (“SW”). select

(page 14). Pressing the [ATT] button at least 1 second after selecting the “DIALING • SUPREME MODE” item allows you to enter the dialing method Technology to extrapolate and supplement with selection mode. To exit from dialing method se

ページ20に含まれる内容の要旨

Accessories/ Installation Procedure • Do not use your own screws. Use only the screws provided. Accessories If you use the wrong screws, you could damage the unit. • If the power is not turned ON (“Protect” is displayed), the speaker wire may have a short-circuit or touched the 1 chassis of the vehicle and the protection function may have been activated. Therefore, the speaker wire should be checked. ..........1 • If your car’s ignition does not have an ACC position, connect the ignition w