ページ1に含まれる内容の要旨
SEARS
OWNERS
MANUAL
CRAFTSMAN
AIR COMPRESSOR
MODEL NO.
919.176210
919,176311
919.176320
919.176330
Record In the spaces provided.
(1) The model number which can be
found on the label on the front Of the
air tank saddle.
(2) The code number which can be
found on the ,'oil label on the aide of
the air tank.
(3) The Manufacturers Number (ASME
Code Compressors only) Is located
on the metal data plate which is
welded onto the side of the air tank,
(This data plate is painted the same
color as the tan
ページ2に含まれる内容の要旨
TABLE OF CONTENTS Page WARRANTY ......................................................... 3 SAFETY GUIDELINES ................................................ 3 SPECIFICATION CHART .............................................. 5 GENERAL INFORMATION ............................................. 6 GENERAL DESCRIPTION OF OPERATION .............................. 6 ASSEMBLY INSTRUCTIONS ........................................... 6 Tools Needed for Assembly .........................................
ページ3に含まれる内容の要旨
FULL ONE YEAR WARRANTY AIR COMPRESSOR If this air compressor fails due to a defect in material or workmanship within one year from the date of purchase, return it to the nearest Sears Service Center/Department throughout the United States and Sears will repair it, free of charge. If this air compressor is used for commercial or rental purposes, the warranty will apply for ninety days from date of purchase, This warranty gives you specific legal rights and you may also have other rights which var
ページ4に含まれる内容の要旨
HAZARD SAFEGUARDS AREA ,,,i ..................... ii ,i i ii Hot Parts Air compressors get hOt when Never touch the compressor, tubing, or running. Serious burns may re- motor during or immediately after operation sult if touched. of the compressor. Air Tank Air pressure or mechanical loads DO not adjust, remove, or defeat the safety that are higher than design loads valve. Check the valve from time to time by may cause the tank to rupture. pulling the ring on the valve. If the valve is stuck or
ページ5に含まれる内容の要旨
AREA HAZARD SAFEGUARDS i i • , ...... illl, Toxic Vapors Compressed air from this unit Never directly inhale the compressed air may cenlain poisonous carbon produced by this unit. monoxide. Certain sprayed materials Such Be certain to read labels when spraying as paints, weed killer, sand, in- paints or poisons. secticides, etc., may be harmful if used in a closed area or ifinhaled. Use a mask or respirator whenever there is a chance that you might inhale anything that you are spraying. Read all
ページ6に含まれる内容の要旨
THIS MANUAL IS DESIGNED TO MAKE IT AS EASY AS POSSIBLE FOR YOU TO SET UP, OPERATE AND MAINTAIN YOUR NEW CRAFTSMAN AIR COMPRESSOR GENERAL INFORMATION ASSEMBLYINSTRUCTIONS You have purchased an air compressor outfit consisting Tools Needed For Assembly of a 2 cylinder single stage air compressor pump with air TOols needed are: (1) a 9/16"socket or open end wrench tank, an air hose assembly, wheels, a foot extension bracket and handle. You will also find an air chuck and a for attaching the wheels;
ページ7に含まれる内容の要旨
Start-Up Procedures It may be necessary to brace or support one end of the outfit when attaching the wheels and the foot extension bracket because the All units are shipped without oil. Serious outfit will have a tendency to tip over before damage may result if the following break-in wheels are attached. instructions are not closely followed. This operation has to be completed only once 1. Insert the handle into pockets under the tank Saddle; when first putting the unit in service, Put one set s
ページ8に含まれる内容の要旨
Note m If the overload protector shuts the motor off fre- quently, check for a possible voltage problem. Low voltage can also be suspected when" PR,=SSURE LOADS BEYOND DESIGN 1. The motor does not get up to full power or LIMITS MAY CAUSE TANK RUPTUR- _ OR speed; -XFLOSIOi'.:. PRESSURE SWITCH OPERA- 2. Fuses blOwout when starting the motor. TfON IS RELATED TO MOTOR HP, TANK 3. Lights dim and remain dim when motor is F_ATIN3 AF_D SAFETY VALVE SETTING. DO started. NOT ATT__,,-IPT TO ADJUST REMOVE,
ページ9に含まれる内容の要旨
Replacing Belt Chan_.;,=, v.. i _n," J_ • '- I Overfilling with oil will cause premature compressor failure. Do not overfill, SSRIOUS !,',,JUR. OF :'-.,,,,_,',-=_- I_,_."." OCCUR IF PARTS 0."- T:,-:Z-:.:,:". ,3F. :-.C','-' SE Check oil level in the crankcase before each use. The oil IT---_r;3 GET " ' ....... .,,.,A level should be even with the top of the fill hole and must NEV_=R OPERATF TH- ....... ,,'_,TT": _ W_TI-'. .... ! _--=_ not be allowed to be lower than _/8" from the top (6 COX','SOLE
ページ10に含まれる内容の要旨
Air Compressor 79 31 76 33 27 81 29 |SA 40 or 40A 43 _0
ページ11に含まれる内容の要旨
PARTS LIST J KEY NO. PART NUMBER DESCRIP_ON 1 SSF-953-ZN Self tapping screw (9 used) 2 CAC-21 Console 3 CAC-44 Belt guard closure 3A LA-1666 Labet (Models 919.176210& 919.176311) LA-1687 Label (Models 919.176320 & 919.176330) 4 SSF-6627 Stud 5 CAC-111 Bracket 6 SSF-8113-ZN Lock nut Filter retainer 7 266-18 8 SSF-935 Screw #8-32 x 3/a"(2 used) " 9 9-16279 Kit of two intake filters (1 used) 10 SS-8553 Connector body 11 STD575025 i/,,, Nut (2 used) STD575026 1/4"Ferrule (2 used) Pressure release tu
ページ12に含まれる内容の要旨
PARTS LIST (Continued) KEY NO. PARTNUMBER DESCRIPTION Pin 36 SUDL-54 37 TA-4001 Air tank (Model 919,1762!0) TA-4003 Air tank ASME (Model 919.176311) TA-4007 Air tank ASME (Model 919.!763_20) TA-4043 - Air tank ASME (Model 919.176330) 38 LA-1693 Label (Models 919.176210& 919.176311) LA-1694 Label (Model 919.176320) LA-1695 Label (Model 919,176330) 39 LA-1689 Label (Model 919.176210) LA-1690 Label (Model 919.176311) LA-1691 Label (Model 919,176320) LA-1692 Label (Model 919.176330) 40 CAC-410 8" Wh
ページ13に含まれる内容の要旨
PARTS LIST (Continued) KEY DESCRJPTION NO. PART NUMBER "73 265-1tl Oil seal 74 C-BT-215 Poly-V-beit 75 STD523107 Cap screw 5A="-18× %" 76 SSN-1014-ZN Belleviile washer 77 265 -2 Flywhee] 78 265-9 End plate i 79 265-23 Needle bearing "80 265-13 End plate gasket Crankshaft 81 _.265:.L 82 SSW-7367 Strain relief (2 used) 83 21181-506 Lockwasher (2 used) NOT ILLUSTRATED SSH-8 Air Chuck 9-16163 Air Hose Assembly (%" x i5') SI-30-09-1-D Owners Manual 630-01 "Power Painting With Sprayer" booklet •Parts
ページ14に含まれる内容の要旨
PROBLEM CAUSE CORRECTION ii, i i iiiii iiii Motor Will Not Run (Cont'd) Fuse blown, circuitbreaker !) Check fuse box for blown fuse and replace pped, as necessary or reset circuitbreaker. Do not use a fuse orcircuit breaker with a rating that is higher than what is specified for your par- ticular branch circuit. (See Specification Chart, page 5.) 2) Check for proper fuse, only "Fusetron" Type T fuses are acceptable. 3) Remove check valve and clean or replace if it is stuck open or closed. 4) Ch
ページ15に含まれる内容の要旨
.... _ ....... wx vv|_l_ q_VUIItl|lb_ CAUSE CORRECTION PROBLEM ii Leak at welds. DO NOT DRILL IKT_. WELD OF. Air Leaks (Cont'd) OTHERWISE MO,:::)I_=_. ' AIR TANI'. OF TANK WILL BE WEAK=-.NED, TANK MUST 5-- RF.PLA3_E:. Air leak in safety valve. Operate safety valve manually by pulling on ring. If valve still leaks, itshould be replaced. Restricted Air Intake Dirty air filter. Clean or replace with new. lln i ,,_ ,mini ,..i., pill il II ,,.,, iiiii iii iiiii __ Belt too loose. Squealing Souncl "li
ページ16に含まれる内容の要旨
SEARS CRAFTSMAN OWNERS AIR COMPRESSOR MANUAL SERVICE Now that you have purchased your Sears Air Compressor, should a need ever exist for repair parts or service, simply contact any Sears Service Center and most Seam, Roebuck and Co. stores. Be sure to provide all pertinent facts when you call or visit. MODEL NO. The model number of your Sears Air Compressor is 919.......................... _. This number can be found on the label which is located on the front 919.176210 of the sir tank. 919.1763
