Harbor Freight Tools CENTRAL PNEUMATIC 40131の取扱説明書

ページ1に含まれる内容の要旨

AIR HOSE REEL AIR HOSE REEL
AIR HOSE REEL AIR HOSE REEL AIR HOSE REEL
WITH 30’ , 3/8" HOSE WITH 30’ , 3/8" HOSE
WITH 30’ , 3/8" HOSE WITH 30’ , 3/8" HOSE WITH 30’ , 3/8" HOSE
Model 40131
INSTALLATION and OPERATING INSTRUCTIONS
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
®
Copyright 2002 by Harbor Freight Tools . All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
witho

ページ2に含まれる内容の要旨

Specifications Air Inlet / Outlet 1/4”- 18 NPT Recommended Air Pressure 60-100 PSI (4-6 SCFM) Air Hose 3/8” Dia. x 30 Feet Air Flow 25 CFM Maximum Hose Reel Capacity 30 Feet Maximum PSI 250 PSI, 750 PSI Burst Pressure Overall Dimensions 10-5/8” L x 14” W x 12-11/16” H Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manua

ページ3に含まれる内容の要旨

9. Maintain tools with care. Keep tools clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect tool cords and air hoses periodically and, if damaged, have them repaired by an authorized technician. The handles must be kept clean, dry, and free from oil and grease at all times. 10. Disconnect air supply. Disconnect air hose when not in use. 11. Stay alert. Watch what you are doing, use common sense. Do not operate any tool when you are tire

ページ4に含まれる内容の要旨

Unpacking When unpacking, check to make sure the parts listed on page 5 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible. FIGURE 1 Installation 1. You may mount your Hose Reel on a wall, workbench, or a ceiling. The surface you mount to must be capable of holding the weight of the Hose Reel, the hose, and the additional stress from tugging on the unit with the hose extended. 2. Mount the unit throu

ページ5に含まれる内容の要旨

Parts List Part No. Description Qty. 1 Base 1 2 Stand 1 3 Fixed Washer 1 4 Washer 1 5 Position Sleeve 1 6 Flange A 1 7 Sleeve 1 8 Flange B 1 9 Position Sleeve 1 10 Washer 1 11 Spring 1 12 Washer 1 13 Swivel (2 valves & 0-rings) 1 14 Spring Washer 1 15 Nut 3 16 Washer 3 17 Rubber Protector 1 18 Clamp 1 19 Screw 3 20 Screw 3 21 Washer 3 22 Nut 3 23 Handle 1 24 Input Valve 1 25 Locking Pin 1 26 Hose 1 PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIA

ページ6に含まれる内容の要旨

Assembly Drawing 2 1 3 24 16 18 4 5 25 6 26 17 7 20 9 8 10 15 19 21 11 22 14 12 23 13 Page 6 SKU 40131