ページ1に含まれる内容の要旨
!
Introduction 2
Before using for the first time 5
Basic operations 7
Various playback patterns 11
OPEN/
REPEAT CLOSE STANDBY/ON
RANDOM PROGRAM CANCEL CALL
DISC 1 DISC 2 DISC 3 DISC 4
DISC 5 DISC 6 DISC 7 DISCSKIP
1 23 4
5 67 8
General informations 13
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC 6 DISC 7 OPEN/CLOSE
EXCHANGE/DISC SKIP
9 10 +10
PLAY
STANDBY
STANDBY/ON STOP PAUSE
7-DISC SKIP
XL-FZ700 C
ページ2に含まれる内容の要旨
! Warnings, Cautions and Others Mises en garde, précautions et indications diverses CAUTION CAUTION To reduce the risk of electrical shocks, fire, etc.: RISK OF ELECTRIC SHOCK 1. Do not remove screws, covers or cabinet. DO NOT OPEN 2. Do not expose this appliance to rain or moisture. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK) ATTENTION NO USER SE
ページ3に含まれる内容の要旨
! We would like to thank you for purchasing one of our Eng English lish JVC products. Table of Contents Before connecting this unit to the wall outlet, please read the instructions carefully to ensure that you obtain the best possible performance. Introduction Page 2 If you have any questions, please consult your JVC dealer. Precautions......................................................................... 2 About this manual....
ページ4に含まれる内容の要旨
! Introduction Precautions About this manual This manual covers the operating instructions for the Load compact discs only compact disc automatic changer XL-FZ700BK. Never insert anything other than compact discs into any part of the player. This manual is organized as follows: If a problem persists The first part, “Introduction”, gives you the precautions If something goes wrong, turn off the power when using this unit, and shows
ページ5に含まれる内容の要旨
" ! Introduction English Names of buttons Main unit 8888 PAUSE button EXCHANGE/DISC SKIP button STANDBY indicator 0000 OPEN/CLOSE button % % % % STANDBY/ON button DISC (1-7) buttons 3333 PLAY button OPEN/CLOSE DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC 6 DISC 7 EXCHANGE/DISC SKIP PLAY STANDBY STANDBY/ON STOP PAUSE 7-DISC SKIP PLAY & EXCHANGE XL-FZ700 COMPACT DISC AUTOMATIC CHANGER CD-R/RW PLAYBACK . . . . 1BIT P E M D D CONVERTER Dis
ページ6に含まれる内容の要旨
# ! Introduction Remote control unit OPEN/CLOSE button PROGRAM button Remote control signal transmitter % % STANDBY/ON button % % Turns on the unit or puts it in OPEN/ REPEAT CLOSE STANDBY/ON STANDBY mode REPEAT button CANCEL button RANDOM PROGRAM CANCEL CALL RANDOM button CALL: displaying program contents button DISC 1 DISC 2 DISC 3 DISC 4 DISC (1-7) buttons DISC 5 DISC 6 DISC 7 DISC SKIP DISC SKIP button 1 23 4 5 67 8 Track buttons
ページ7に含まれる内容の要旨
! Before using for the first time English Installing the unit Connecting to the Digital Output Jack Best location Select a location which is level, dry and neither too cold It is possible to transmit a digital sound signal from this nor too hot (temperature range 5°C (41°F) to 35°C (95°F)). unit directly to a MD recorder, etc. Also, avoid dusty locations or any location subject to vibration. NOTES If interference occurs Never co
ページ8に含まれる内容の要旨
$ ! Before using for the first time To install the batteries in the remote COMPU LINK connection control unit JVC’s COMPU LINK Remote Control System provides Before operating the remote control unit, install two unified control over system components connected with batteries. COMPU LINK. Connecting JVC audio components with the COMPU LINK jacks automatically controls relative 1 While pushing the tab of the rear cover, operations b
ページ9に含まれる内容の要旨
3
! Basic operations English Basic functions for disc playback Turning on the power of this unit Press the % % % % STANDBY/ON button to turn on this unit. The STANDBY indicator is turned off and the display is The number written on the carousel corresponds turned on. to the disc number shown on the display Main unit Remote control unit STANDBY STANDBY/ON NOTE From the second time on, the carousel opens with the STANDBY/ON previ
ページ10に含まれる内容の要旨
% ! Basic operations Disc to be played back To stop playback temporarily The disc set in the front-left disc tray when the carousel Press the 8 PAUSE button on the main unit or the 8 closes is loaded for playback. If no disc is set in the front- button on the remote control unit. The 8 indicator lights left disc tray when the carousel closed, the unit rotates on the display and playback stops temporarily. the carousel clockwise until i
ページ11に含まれる内容の要旨
& ! Basic operations Using the track buttons English Locating a point to start Remote control unit 1 23 4 playback 5 67 8 Skipping to a desired disc during 9 10 +10 playback (DISC SKIP) Use the DISC SKIP button on the remote control unit. To skip to the desired track during playback, press the Remote control unit corresponding track buttons. DISC SKIP [How to use the track buttons] When selecting track number 11 or above, use the [+1
ページ12に含まれる内容の要旨
! Basic operations Specifying a desired track in stop mode Playing tracks in a order of disc/track number To specify the desired track number, use the track buttons (1-10, +10). You can continuously play all the loaded discs, starting Remote control unit from any track on any disc. 1 23 4 1 Press the 3 PLAY button on the main unit or 5 67 8 the 3 button on the remote control unit to start playback. 9 10 +10 Playback starts from t
ページ13に含まれる内容の要旨
! Various playback patterns English 4 Repeat steps 2 and 3 for other tracks and/or Playing tracks in a desired discs to be programmed. You can program up to 32 steps. order (Program Play) 5 Start playback by pressing the 3 PLAY button You can play only the favorite tracks in any desired order. on the main unit or the 3 button on the remote control unit. 1 In stop mode, press the PROGRAM button so The programmed tracks and/or disc
ページ14に含まれる内容の要旨
! Various playback patterns Playing tracks in a random Playing repeatedly order (Random Play) (Repeat Play) You can select and play tracks in random order from all Normally, all available discs are sequentially played the discs loaded in the unit. back. However, with the repeat play function, you can Selections are made so that each track is played only repeatedly play all tracks of a disc or one track. once. It is also possible to
ページ15に含まれる内容の要旨
" ! General informations English COMPU LINK remote control system The COMPU LINK Remote Control System controls relative operations between components automatically and facilitates various operations. This is a system originated and developed by JVC for facilitating various system operations. The following is a brief explanation of this system: Automatic source selection When the supplied COMPU LINK cord is utilized to connect this uni
ページ16に含まれる内容の要旨
# ! General informations Care and handling How to handle CDs When handling compact discs, do not touch the surface of the disc (reflective silver side — the side without the label). Since compact discs are made of plastic, they are easily damaged. If the disc gets dirty, dusty, scratched or warped, the sound will not be picked up correctly and, in addition, such discs may cause the CD player to malfunction. Even on label side Do not da
ページ17に含まれる内容の要旨
! General informations English Troubleshooting What appears to be a malfunction may not always be serious. Please go through the following list before requesting service. Symptom Possible case Remedy Power plug is disconnected from the AC Connect the plug to the AC outlet. outlet. The unit is not operative. Discs are not loaded. Load discs in the disc tray. Load the disc with its label-side up in the disc Disc is inserted upside dow
ページ18に含まれる内容の要旨
! Authorized Service Centers ® QUALITY SERVICE HOW TO LOCATE YOUR JVC SERVICE CENTER TOLL FREE: 1 (800) 537-5722 http://www.jvc.com Dear Customer, In order to receive the most satisfaction from your purchase,please read the instruction booklet before operating the unit.In the event that repairs are necessary, please call 1 (800)537-5722 for your nearest authorized servicer or visit our website at www.JVC.com Remember to retain your Bi
ページ19に含まれる内容の要旨
% ! LIMITED WARRANTY AUDIO-1 JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of original retail purchase for the period as shown below. ("The Warranty Period") PARTS LABOR 1 YR 1 YR THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND IN CO
ページ20に含まれる内容の要旨
& ! VICTOR COMPANY OF JAPAN, LIMITED JV C 0202AOMCREJEM EN
