ページ1に含まれる内容の要旨
General
Manual
Model No.
919.19007
Air Tool Set
� SAFETY GUIDELINES
IMPORTANT:
Read the Safety Guidelines
OPERATION
and All Instructions Carefully
Before Operating
Sears Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
D21543 Rev. 0 7/14/00
ページ2に含まれる内容の要旨
SAFETY GUIDELINES - DEFINITIONS
Information for preventing damage to URGENT SAFETY INFORMATION - A HAZARD
equipment. THAT WILL CAUSE SERIOUS INJURY OR LOSS
OF LIFE.
IMPORTANT SAFETY INFORMATION - A Information that you should pay special
ページ3に含まれる内容の要旨
WHAT COULD HAPPEN HOW TO PREVENT IT HAZARD Always wear MSHA/NIO5H Abrasive tools, such as grinders and approved, properly fitting face sanders generate dust and abrasive materials which can be harmful to mask or respirator when using such RISK TO BREATHING tools. human lungs and respiratory system. INHALATION HAZARD Some materials such as adhesives and tar, Always work in a clean, dry, well contain chemicals whose vapors could ventilated area. cause serious injury with prolonged exposure
ページ4に含まれる内容の要旨
MODEL 919.19009 1/2” IMPACT WRENCH SPECIFICATION CHART Torque 230 ft./lbs. @ 7000 RPM’s Maximum Working Pressure 90 PSI Air Inlet 1/4” NPT Recommended Hose Size 3/8” I.D. Minimum CFM Required @ 90 PSI 8 CFM (25% usage) #1 Approximately 150 ft./lbs. Torque #2 Approximately 190 ft./lbs. Torque #3 Approximately 210 ft./lbs. Torque TORQUE #4 Approximately 230 ft./lbs. Torque REGULATOR 1 KNOB
4 2 3
ページ5に含まれる内容の要旨
MODEL 919.19008 3/8” AIR RATCHET WRENCH SPECIFICATION CHART Free Speed 150 RPM (Forward/Reverse) Maximum Working Pressure 90 PSI Air Inlet 1/4" NPT Recommended Hose Size 3/8" I.D. Minimum CFM Required @ 90 PSI 5.5 CFM (25% usage) Torque Delivered @ 150 RPMS 45 Ft./Lbs. Follow instructions for lubricating and changing accessories. Maintain tools with care. OPERATING INFORMATION Lubrication Air Supply Air tools require lubrication throughout the life of the tool. Recommended Air Compressor: 1 HP
ページ6に含まれる内容の要旨
SERVICE NOTES D21543 6 — ENG
ページ7に含まれる内容の要旨
SERVICE NOTES 7 — ENG D21543
ページ8に含まれる内容の要旨
General Air Tool Set Manual For the repair or replacement parts you need Call 7 am - 7 pm, 7 days a week 1-800-366-PART (1-800-366-7278) MODEL NO. For in-home major brand repair service Call 24 hours a day, 7 days a week 919.19007 1-800-4-REPAIR (1-800-473-7247) For the location of a Sears Parts and Repair Center in your area Call 24 hours a day, 7 days a week FULL ONE YEAR WARRANTY AIR TOOL 1-800-488-1222 If this air tool fails due to a defect in material or workmanship within one year from the
