ページ1に含まれる内容の要旨
SAFETY PRECAUTIONS
OWNER’S/
MOST ACCIDENTS OCCUR BECAUSE OF NEGLECT OR CARELESSNESS.
AVOID NEEDLESS ACCIDENTS BY FOLLOWING ALL OF THE SAFETY PRECAUTIONS LISTED BELOW.
OPERATOR’S
� Machinery should be operated only by those who are � Reduce speed when transporting mounted implements
MANUAL
responsible and are authorized to do so. to avoid bouncing and momentary loss of steering
control.
� Stop the engine, lower all equipment, lock the brakes,
and remove the ignition key before dismounting from th
ページ2に含まれる内容の要旨
SINO LEEINGLES, PIDA AYUDA A NOTES TABLE OF CONTENTS AIGUIEN QUE SI LO LEA PARA QUE LE TRADUZCA LAS MEDIDAS DE SEGURIDAD. WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 STATEMENT OF POLICY SAFETY SIGNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 It is the policy of Worksaver, Inc. to improve its products where PREPARATION INSTRUCTIONS . . . . . .
ページ3に含まれる内容の要旨
OPTIONAL UPRIGHT KIT PARTS LIST (#831095) LIMITED WARRANTY ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ Worksaver warrants to the original purchaser of any new Bale Spear Attachment, that the equipment be free from defects in material and workmanship for a period of six (6) months for non-commercial, state, and municipalities. Use sixty (60) days for commercial use from date of retail sale. Replacement or repair parts installed in the equipment covered by this warranty are warranted for
ページ4に含まれる内容の要旨
GLB-340 PARTS LIST To the Owner/Operator/Dealer All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded opera- tor who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the chance of accidents. BEFORE YOU START!! Read the safety messages on the implement and shown in your manual. Observe the rules of saf
ページ5に含まれる内容の要旨
SAFETY INSTRUCTIONS (continued) GLB-330 PARTS LIST EQUIPMENT SAFETY GUIDELINES Safety of the operator is one of the main concerns in designing and developing a new piece of equipment. Designers and manufacturers build in as many safety features as possible. However, every year many accidents occur which could have been avoided by a few seconds of thought and a more careful approach to handling equipment.You, the operator, can avoid many accidents by observing the following precautions in this se
ページ6に含まれる内容の要旨
GLB-3000 PARTS LIST SAFETY INSTRUCTIONS (continued) SAFETY SIGNS Keep safety signs clean and legible at all times. Replace safety signs that are missing or have become illegible. Replaced parts that displayed a safety sign should also display the current sign. Safety signs are available from your Distributor or Dealer Parts Department or the factory. How to Install Safety Signs: Be sure that the installation area is clean and dry. Be sure temperature is above 50°F (10°C). Decide on the exact pos
ページ7に含まれる内容の要旨
SAFETY INSTRUCTIONS (continued) GLB-2200 PARTS LIST SAFETY TRAINING Safety is a primary concern in the design and manufacture of our products. Unfortunately, our efforts to pro- vide safe equipment can be wiped out by a single careless act of an operator. In addition to the design and configuration of equipment, hazard control and accident prevention are dependent upon the awareness, concern, prudence and proper training of personnel involved in the operation, transport, maintenance and storage
ページ8に含まれる内容の要旨
SAFETY INSTRUCTIONS (continued) OWNER SERVICE MAINTENANCE STORAGE PREPARATION (continued) —————————————————— —————————————————— � Never store equipment with fuel in the tank inside a WARNING! Personal protection equipment including hard hat, safety glasses, safety shoes, and gloves are recommended building where fumes may reach an open flame or during assembly, installation, operation, adjustment, maintaining, repairing, removal, or moving the implement. spark. Allow engine to cool before storin
ページ9に含まれる内容の要旨
SAFETY INSTRUCTIONS (continued) INSTRUCTIONS (continued) HANDLE BALES SAFELY OPERATIONAL SAFETY (continued) Improper use of loaders to handle bales can result in serious injury or death to the operator. This could be caused by the bale tumbling back down the loader into Most accidents occur because of neglect or carelessness. Keep all helpers and bystanders at a safe distance. REMEMBER FALLING BALES CAN ROLL OR TUMBLE. the operator’s station. For optimum stability and visibility: Beware of low e
ページ10に含まれる内容の要旨
INSTRUCTIONS (continued) SAFETY INSTRUCTIONS (continued) NOTE: In cold weather, a bale frozen to the ground may OPERATION (continued) —————————————————— exceed the lifting capacity of spear and loader. Damage OPERATIONAL SAFETY (continued) NOTE: In cold weather, a bale frozen to the ground may to spear or loader may occur. Not covered under exceed the lifting capacity of spear and loader. Damage warranty. to spear or loader may occur. Not covered under Allow for additional length of loader and b
ページ11に含まれる内容の要旨
SAFETY INSTRUCTIONS (continued) INSTRUCTIONS (continued) ASSEMBLY OPERATION —————————————————— —————————————————— TRANSPORT SAFETY Refer to the “exploded views” on pages 19-23 of this The operator is responsible for the safe operation of this manual. equipment. The operator must be properly trained. Comply with state and local laws governing highway safety and movement of farm machinery on public roads. Operators should be familiar with the attachment, tractor, and loader and all safety practice
ページ12に含まれる内容の要旨
SAFETY INSTRUCTIONS (continued) INSTRUCTIONS Check your tractor and front loader to make sure they TRACTOR AND LOADER MAINTENANCE SAFETY are in good working condition. Check all loader mounting REQUIREMENTS AND bolts to make sure they are tight. PREPARATION —————————————————— Good maintenance is your responsibility. Poor maintenance is an invitation to trouble. Check the tractor’s hydraulic system. Be sure the The Bale Spear Attachments are designed to fit hydraulic oil and filter have been ser
ページ13に含まれる内容の要旨
SAFETY INSTRUCTIONS (continued) SAFETY SIGNS MAINTENANCE SAFETY (continued) After servicing, be sure all tools, parts and service equipment are removed. WARNING Check to ensure all safety signs are installed and in good condition. (See safety sign section for location Always insert spears in bale – never drawing.) under bale. Failure to do this can allow bale Do not allow grease or oil to build up on any deck or platform. roll back when loader is raised, causing serious injury or death. Never re
ページ14に含まれる内容の要旨
SAFETY INSTRUCTIONS (continued) SAFETY SIGNS MAINTENANCE SAFETY (continued) After servicing, be sure all tools, parts and service equipment are removed. WARNING Check to ensure all safety signs are installed and in good condition. (See safety sign section for location Always insert spears in bale – never drawing.) under bale. Failure to do this can allow bale Do not allow grease or oil to build up on any deck or platform. roll back when loader is raised, causing serious injury or death. Never re
ページ15に含まれる内容の要旨
SAFETY INSTRUCTIONS (continued) INSTRUCTIONS Check your tractor and front loader to make sure they TRACTOR AND LOADER MAINTENANCE SAFETY are in good working condition. Check all loader mounting REQUIREMENTS AND bolts to make sure they are tight. PREPARATION —————————————————— Good maintenance is your responsibility. Poor maintenance is an invitation to trouble. Check the tractor’s hydraulic system. Be sure the The Bale Spear Attachments are designed to fit hydraulic oil and filter have been ser
ページ16に含まれる内容の要旨
SAFETY INSTRUCTIONS (continued) INSTRUCTIONS (continued) ASSEMBLY OPERATION —————————————————— —————————————————— TRANSPORT SAFETY Refer to the “exploded views” on pages 19-23 of this The operator is responsible for the safe operation of this manual. equipment. The operator must be properly trained. Comply with state and local laws governing highway safety and movement of farm machinery on public roads. Operators should be familiar with the attachment, tractor, and loader and all safety practice
ページ17に含まれる内容の要旨
INSTRUCTIONS (continued) SAFETY INSTRUCTIONS (continued) NOTE: In cold weather, a bale frozen to the ground may OPERATION (continued) —————————————————— exceed the lifting capacity of spear and loader. Damage OPERATIONAL SAFETY (continued) NOTE: In cold weather, a bale frozen to the ground may to spear or loader may occur. Not covered under exceed the lifting capacity of spear and loader. Damage warranty. to spear or loader may occur. Not covered under Allow for additional length of loader and b
ページ18に含まれる内容の要旨
SAFETY INSTRUCTIONS (continued) INSTRUCTIONS (continued) HANDLE BALES SAFELY OPERATIONAL SAFETY (continued) Improper use of loaders to handle bales can result in serious injury or death to the operator. This could be caused by the bale tumbling back down the loader into Most accidents occur because of neglect or carelessness. Keep all helpers and bystanders at a safe distance. REMEMBER FALLING BALES CAN ROLL OR TUMBLE. the operator’s station. For optimum stability and visibility: Beware of low e
ページ19に含まれる内容の要旨
SAFETY INSTRUCTIONS (continued) OWNER SERVICE MAINTENANCE STORAGE PREPARATION (continued) —————————————————— —————————————————— � Never store equipment with fuel in the tank inside a WARNING! Personal protection equipment including hard hat, safety glasses, safety shoes, and gloves are recommended building where fumes may reach an open flame or during assembly, installation, operation, adjustment, maintaining, repairing, removal, or moving the implement. spark. Allow engine to cool before storin
ページ20に含まれる内容の要旨
SAFETY INSTRUCTIONS (continued) GLB-2200 PARTS LIST SAFETY TRAINING Safety is a primary concern in the design and manufacture of our products. Unfortunately, our efforts to pro- vide safe equipment can be wiped out by a single careless act of an operator. In addition to the design and configuration of equipment, hazard control and accident prevention are dependent upon the awareness, concern, prudence and proper training of personnel involved in the operation, transport, maintenance and storage
