ページ1に含まれる内容の要旨
EN
Operation
&
Maintenance
Manual
S/N 531711001 & Above
EQUIPPED WITH
BOBCAT INTERLOCK
CONTROL SYSTEM (BICS)
6904144-EN (09-06) © Bobcat Europe 2006
Printed in Europe
ページ2に含まれる内容の要旨
OPERATOR SAFETY WARNINGS CORRECT Operator must have instructions before running the machine. Untrained WARNING operators can cause injury or death. W-2001-1285 B-10731A Safety Alert Symbol: This symbol with a warning statement, means: "Warning, be alert! Your safety is Never use the loader without involved!" Carefully read the message that instructions. See machine signs (decals), Operation & Maintenance follows. Manual, and Operator’s Handbook. CORRECT WRONG WRONG B-15962 B-15570 B-15953 Always
ページ3に含まれる内容の要旨
FOREWORD CONTENTS FOREWORD ..............................................................................................III SAFETY .................................................................................................... XI SAFETY OPERATING INSTRUCTIONS....................................................................1 PREVENTIVE MAINTENANCE ................................................................61 OPERATING INSTRUCTIONS SYSTEM SETUP & ANALYSIS ...........................
ページ4に含まれる内容の要旨
T190 Compact Track Loader Operation & Maintenance Manual II
ページ5に含まれる内容の要旨
FOREWORD FOREWORD This Operation & Maintenance Manual was written to give the owner / operator instructions on the safe operation and maintenance of the Bobcat Loader. READ AND UNDERSTAND THIS OPERATION & MAINTENANCE MANUAL BEFORE OPERATING YOUR LOADER. If you have any questions, see your Bobcat dealer. BOBCAT COMPANY IS ISO 9001:2000 CERTIFIED................................. V DELIVERY REPORT................................................................................. VI FEATURES, ACCESSOR
ページ6に含まれる内容の要旨
T190 Compact Track Loader Operation & Maintenance Manual IV
ページ7に含まれる内容の要旨
BOBCAT COMPANY IS ISO 9001:2000 CERTIFIED ISO 9001:2000 is an international standard that controls the processes and procedures which we use to design, develop, manufacture and distribute Bobcat products. British Standards Institute (BSI) is the Certified Registrar Bobcat Company chose to assess the Company’s compliance with the ISO 9001:2000 standard. The BSI registration certifies that the two Bobcat manufacturing plants and the Bobcat corporate offices (Gwinner, Bismarck & West Fargo) in Nort
ページ8に含まれる内容の要旨
SERIAL NUMBER LOCATIONS Engine Serial Number Always use the serial number of the loader when Figure 2 requesting service information or when ordering parts. Early or later models (identification made by serial number) may use different parts, or it may be necessary to use a different procedure in doing a specific service operation. Figure 1 P-48002 The engine serial number is located on the side of the engine [Figure 2] above the oil filter. DELIVERY REPORT P-21827A Figure 3 Loader Serial Numbe
ページ9に含まれる内容の要旨
LOADER IDENTIFICATION FRONT LIGHTS SEAT BAR OPERATOR SEAT WITH SEAT BELT GRAB HANDLES STEERING LEVER ▼ REAR AUXILIARY QUICK COUPLERS TILT CYLINDER STABILIZER ROD † BUCKET FRONT AUXILIARY QUICK COUPLERS BUCKET STEPS SAFETY TREAD ● OPERATOR CAB REAR WINDOW (ROPS & FOPS) LIFT ARM LINK REAR GRILL LIFT ARM LIFT CYLINDER TAIL LIGHT LIFT ARM SUPPORT DEVICE REAR LIGHT REAR DOOR TRACKS B-15984A B-15985A ▼ OPTIONAL OR FIELD ACCESSORY (Not Standard Equipment) † BUCKET - Several different buckets and o
ページ10に含まれる内容の要旨
FEATURES, ACCESSORIES AND ATTACHMENTS Standard Items Options and Accessories Model T190 Bobcat Loaders are equipped with the Below is a list of some equipment available from your following standard items: Bobcat Loader dealer as Dealer and / or Factory Installed Accessories and Factory Installed Options. See your Adjustable cushion seat Bobcat dealer for other available options, accessories Automatically activated glow-plugs and attachments. Auxiliary hydraulics: variable flow / maximum fl
ページ11に含まれる内容の要旨
FEATURES, ACCESSORIES AND ATTACHMENTS Buckets Available (CONT’D) These and other attachments are approved for use on this model loader. Do not use unapproved attachments. Attachments not manufactured by Bobcat may not be approved. The versatile Bobcat Loader quickly turns into a multi-job machine with a tight-fit attachment hook-up . . . from bucket to grapple to pallet fork to backhoe and a variety BUCKET of other attachments. See your Bobcat dealer for more details on these and Many bucket sty
ページ12に含まれる内容の要旨
FEATURES, ACCESSORIES AND ATTACHMENTS Special Applications Kit Inspection And Maintenance (CONT’D) Inspect for cracks or damage. Replace if required. Special Applications Kit Pre-rinse with water to remove gritty materials. Wash with a mild household detergent and warm water. Use a sponge or soft cloth. Rinse well with water and dry with a clean soft cloth or rubber squeegee. Do not use abrasive or highly alkaline cleaners. Do not operate windshield wipers on a dry surface. Do not
ページ13に含まれる内容の要旨
SAFETY MACHINE SIGNS (DECALS)...................................................................XV SAFETY INSTRUCTIONS....................................................................... XIII SAFETY Before Operation................................................................................ XIII Fire Prevention...................................................................................XIV Safe Operation Is The Operator’s Responsibility ............................... XIII Safe Oper
ページ14に含まれる内容の要旨
T190 Compact Track Loader Operation & Maintenance Manual XII
ページ15に含まれる内容の要旨
SAFETY INSTRUCTIONS An Operator’s Handbook is fastened to the operator cab of the Loader. It’s brief instructions are Before Operation convenient to the operator. The Handbook is available from your dealer in an English edition or one Carefully follow the operating and maintenance of many other languages. See your Bobcat dealer for instructions in this manual. more information on translated versions. The Bobcat Loader is highly maneuverable and compact. SI SSL-0206 It is rugged and useful unde
ページ16に含まれる内容の要旨
SAFETY INSTRUCTIONS (CONT’D) A Qualified Operator Must Do The Following: Safe Operation Is The Operator’s Responsibility Understand the Written Instructions, Rules and Regulations The written instructions from Bobcat Company Safety Alert Symbol include the Delivery Report, Operation & Maintenance Manual, Operator’s Handbook and This symbol with a warning statement means: machine signs (decals). "Warning, be alert! Your safety is involved!" Carefully read the message that follows. Check the r
ページ17に含まれる内容の要旨
SAFETY INSTRUCTIONS (CONT’D) Use the procedure in the Operation & Maintenance Manual for cleaning the spark arrestor muffler (if Fire Prevention equipped). The machines and some attachments have components Figure 4 that are at high temperatures under normal operating conditions. The primary source of high temperatures is the engine and exhaust system. The electrical system, if damaged or incorrectly maintained, can be a source of arcs or sparks. Flammable debris (leaves, straw, etc.) must be r
ページ18に含まれる内容の要旨
MACHINE SIGNS (DECALS) Follow the instructions on all the Machine Signs (Decals) that are on the loader. Replace any damaged machine signs and be sure they are in the correct locations. Machine signs are available from your Bobcat Loader dealer. 6718579 SJC - 7131521 Standard and ACS - 6727926 Door Opt. 7110316 6902808 SJC - 7131520 Standard and ACS - 6728540 6735140 Door Opt. - 6707852 3-Pt. Seat Belt. 6710449 SJC - 6737248 6725370 Inside Cab 7117407 (Inside Fuse Cover) 6718391 (Behind Lift Ar
ページ19に含まれる内容の要旨
MACHINE SIGNS (DECALS) (CONT’D) Follow the instructions on all the Machine Signs (Decals) that are on the loader. Replace any damaged machine signs and be sure they are in the correct locations. Machine signs are available from your Bobcat Loader dealer. 6560573 6565990 6708929 6733996 Under Rear Grill 6577754 (2) 6578368 6719018 6727595 (5) 6709030 6734534B Inside Rear Door B-15985A T190 Compact Track Loader XVII Operation & Maintenance Manual
ページ20に含まれる内容の要旨
T190 Compact Track Loader Operation & Maintenance Manual XVIII
