ページ1に含まれる内容の要旨
CD RECEIVER KD-APD58/KD-PDR50
RECEPTOR CON CD KD-APD58/KD-PDR50
RÉCEPTEUR CD KD-APD58/KD-PDR50
For canceling the display demonstration, see page 6.
Para cancelar la demostración en pantalla, consulte la página 6.
Pour annuler la démonstration des affichages, référez-vous à la page 6.
For installation and connections, refer to the separate manual.
For customer Use:
Para la instalación y las conexiones, refiérase al manual separado.
Enter below the Model
Pour l’installation et les raccordement
ページ2に含まれる内容の要旨
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates
ページ3に含まれる内容の要旨
How to reset your unit CONTENTS Control panel — KD-APD58/KD-PDR50 ........ 4 Remote controller — RM-RK50 ............. 5 Getting started ................................ 6 Basic operations ................................................... 6 • Your preset adjustments will also be erased. Radio operations ............................. 7 Disc operations ................................ 8 How to forcibly eject a disc Playing a disc in the unit ..................................... 8 iPod operat
ページ4に含まれる内容の要旨
Control panel — KD-APD58/KD-PDR50 Parts identification Display window 1 SRC (source) button o Remote sensor 2 B BAND button DO NOT expose the remote sensor to strong light 3 (standby/on attenuator) button / (direct sunlight or artificial lighting). Control dial ; S.BASS (super bass) indicator 4 SEL (select) button a DISC indicator 5 Display window s Disc information indicators— 6 5 (up) / ∞ (down) buttons TAG (Tag information), (folder), (track/file) 7 EQ (equalizer) button d Sound mode (iE
ページ5に含まれる内容の要旨
Main elements and features Remote controller — RM-RK50 Installing the lithium coin battery (CR2025) 1 (standby/on/attenuator) button For USA-California Only: • Turns the power on if pressed briefly or This product contains a CR Coin Cell Lithium Battery attenuates the sound when the power is on. which contains Perchlorate Material—special • Turns the power off if pressed and held. handling may apply. 2 5 U (up) / D (down) ∞ buttons See www.dtsc.ca.gov/hazardouswaste/perchlorate • Chang
ページ6に含まれる内容の要旨
To drop the volume in Getting started a moment (ATT) To restore the sound, press Basic operations the button again. ~ Turn on the power. To turn off the power Ÿ Basic settings • See also “General settings — PSM” on pages 13 and 14. 1 * You cannot select “CD” as the playback source if there is no disc in the unit. 1 2 * “NO IPOD” appears if iPod is not connected. 2 ! For FM/AM tuner 1 Canceling the display demonstrations ⁄ Adjust the volume. Select “DEMO,” then “DEMO OFF.” 2 Setting t
ページ7に含まれる内容の要旨
When an FM stereo broadcast is hard to Radio operations receive ~ Lights up when monaural mode is activated. Ÿ Reception improves, but stereo effect will be lost. Lights up when receiving an FM stereo broadcast with sufficient signal strength. To restore the stereo effect, repeat the same procedure. “MONO OFF” appears and the MO indicator goes off. ! Start searching for a station. Storing stations in memory You can preset six stations for each band. When a station is received, searching st
ページ8に含まれる内容の要旨
Manual presetting Disc operations Ex.: Storing FM station of 92.5 MHz into preset number 4 of the FM1 band. Playing a disc in the unit 1 All tracks will be played repeatedly until you change the source or eject the disc. 2 3 To stop play and eject the disc • Press SRC to listen to another Preset number flashes for a while. playback source. To fast-forward or reverse the track Listening to a preset station 1 To go to the next or previous tracks 2 Select the preset station (1 – 6) you wan
ページ9に含まれる内容の要旨
To select a particular track in a folder (for MP3 or Changing the display information WMA discs): While playing an audio CD or a CD Text Other main functions Skipping tracks quickly during play • For MP3 or WMA discs, you can skip tracks within the same folder. While playing an MP3 or a WMA track Ex.: To select track 32 while playing a track whose • When “TAG DISP” is set to “TAG ON” number is a single digit (1 to 9) (see page 14) 1 2 • When “TAG DISP” is set to “TAG OFF” Each time you
ページ10に含まれる内容の要旨
Selecting the playback modes iPod operations You can use only one of the following playback modes You can play songs from an Apple iPod through this unit at a time. by connecting it with the supplied connection cable for iPod. 1 • Disconnecting the iPod will also stop playback. Press SRC to listen to another playback source. 2 Select your desired playback mode. • For connection, see Installation/Connection Manual (separate volume). 7 Repeat play • For details, refer also to the manual supp
ページ11に含まれる内容の要旨
• If the selected item has another layer, you will Caution: enter the layer. Repeat steps 2 and 3 until the • Avoid using the iPod if it might hinder your safety desired track is played (see page 19). driving. • Holding 4/¢ can skip 10 items at • Make sure all important data has been backed up a time. to avoid losing the data. * The menu selecting mode will be canceled: – If no operations are done for about 5 seconds. – When you confirm the selection of a track. To pause playback To res
ページ12に含まれる内容の要旨
Indication, [Range] Sound adjustments 2 BAS * (bass), [–06 to +06] You can select a preset sound mode suitable to the Adjust the bass. music genre (iEQ: intelligent equalizer). 2 MID * (mid-range), [–06 to +06] Adjust the mid-range frequencies sound level. 2 TRE * (treble), [–06 to +06] Adjust the treble. Preset values 3 1 2 3 4 BAS* MID* TRE* S.BS* FAD * (fader), [R06 to F06] Indication (For) Adjust the front and rear speaker balance. 4 USER BAL * (balance), [L06 to R06] 00 00 00 OFF (Flat so
ページ13に含まれる内容の要旨
General settings — PSM You can change PSM (Preferred Setting Mode) items 4 Repeat steps 2 and 3 to adjust other PSM listed in the table that follows. items if necessary. 1 5 Finish the procedure. 2 Select a PSM item. 3 Adjust the PSM item selected. Indications Item Setting, [reference page] ( : Initial) DEMO • DEMO ON : Display demonstration will be activated automatically if no operation is Display done for about 20 seconds, [6]. demonstration • DEMO OFF : Cancels. 1 CLK DISP * • ON :
ページ14に含まれる内容の要旨
Indications Item Setting, [reference page] ( : Initial) 2 SCROLL * • ONCE : Scrolls the track information once. Scroll • AUTO : Repeats scrolling (at 5-second intervals). • OFF : Cancels. • Pressing D DISP for more than one second can scroll the display regardless of the setting. L/O MODE • REAR : Select if both the LINE OUT terminals are used for connecting the Line output mode speakers (through an external amplifier). • WOOFER : Select if the REAR LINE OUT terminals are used for co
ページ15に含まれる内容の要旨
External component Title assignment operations You can assign names to 30 station frequencies (FM and AM) and up to 8 characters for each station name. You can connect an external component to the AUX (auxiliary) input jack on the control panel. 1 Select FM/AM. 2 Show the title entry screen. Portable MD player, etc Stereo mini plug ~ 3 Assign a title. 1 Select a character. Ÿ Turn on the connected component and start playing the source. ! Adjust the volume. 2 Move to the next (or previous)
ページ16に含まれる内容の要旨
Disc operations More about this unit Caution for DualDisc playback • The Non-DVD side of a “DualDisc” does not comply Basic operations with the “Compact Disc Digital Audio” standard. Turning on the power Therefore, the use of Non-DVD side of a DualDisc on • By pressing SRC on the unit, you can also turn on the this product may not be recommended. power. If the source is ready, playback also starts. General Turning off the power • This unit has been designed to reproduce CDs/CD • If you tur
ページ17に含まれる内容の要旨
• Do not use the following CD-Rs or CD-RWs: • This unit cannot play back the following files: – Discs with stickers, labels, or a protective seal stuck – MP3 files encoded with MP3i and MP3 PRO format. to the surface. – MP3 files encoded in an inappropriate format. – Discs on which labels can be directly printed by an – MP3 files encoded with Layer 1/2. ink jet printer. – WMA files encoded with lossless, professional, and Using these discs under high temperatures or high voice format. humi
ページ18に含まれる内容の要旨
• When you turn on this unit, the iPod is charged Title assignment through this unit. • If you try to assign titles to more than 30 station • While the iPod is connected, all operations from the frequencies, “NAMEFULL” appears. Delete unwanted iPod are disabled. Perform all operations from this titles before assignment. unit. • While connecting an iPod with Video: General settings—PSM – No video shows on the iPod’s display or the • “AUTO” setting for “DIMMER” may not work correctly ext
ページ19に含まれる内容の要旨
Hierarchical structure of file searching when an iPod is connected 19 EN12-19_KD-APD58_50[J]f.indd 19 EN12-19_KD-APD58_50[J]f.indd 19 1 11/8/06 2:43:14 PM 1/8/06 2:43:14 PM ENGLISH
ページ20に含まれる内容の要旨
To keep discs clean Maintenance A dirty disc may not play correctly. If a disc does become dirty, wipe it with How to clean the connectors a soft cloth in a straight line from center Frequent detachment will deteriorate the connectors. to edge. To minimize this possibility, periodically wipe the • Do not use any solvent (for example, conventional connectors with a cotton swab or cloth moistened with record cleaner, spray, thinner, benzine, etc.) to clean alcohol, being careful not to da
