ページ1に含まれる内容の要旨
Use & Care Guide
Guide d’utilisation et d’entretien
ELECTRONIC DRYER
SÉCHEUSE ÉLECTRONIQUE
Para obtener acceso
al Manual de uso y
cuidado en español, o para
obtener información adicional
acerca de su producto, visite:
www.whirlpool.com.
If you have any problems or questions, visit us at www.whirlpool.com
Pour tout problème ou question, consulter www.whirlpoolappliances.ca
W10385092A
W10385093A - SP
ページ2に含まれる内容の要旨
ELECTRONIC DRYER SÉCHEUSE ÉLECTRONIQUE TABLE OF CONTENTS Table des Matières DRYER SAFETY .................................................................................... 2 SÉCURITÉ DE LA SÉCHEUSE ............................................................... 19 ACCESSORIES ...................................................................................... 4 ACCESSOIRES .................................................................................... 21 CHECK YOUR VENT SYSTEM FOR GOOD
ページ3に含まれる内容の要旨
3
ページ4に含まれる内容の要旨
ACCESSORIES Enhance your new washer and dryer with the following genuine Worksurface ® Whirlpool accessories. For more information on options and The worksurface bridges ordering, call 1-800-901-2042, or visit us at: the washer and dryer, and www.whirlpool.com/accessories. In Canada, call provides a convenient working 1-800-807-6777 or visit us at www. whirlpoolparts.ca and storage area. 15" Pedestal Color-matched pedestals raise the washer and dryer to a more comfortable working
ページ5に含まれる内容の要旨
CHECK YOUR VENT SYSTEM FOR GOOD AIR FLOW Maintain good air flow by: n Cleaning your lint screen before each load. n Replace plastic or foil vent material with 4" (102 mm) diameter heavy, rigid vent material. n Use the shortest length of vent possible. n Use no more than four 90° elbows in a vent system; each bend and curve reduces air flow. Good Better Good air flow Along with heat, dryers require good air flow to efficiently dry laundry. Proper venting will reduce your drying times
ページ6に含まれる内容の要旨
CONTROL PANEL AND FEATURES Not all features and cycles are available on all models. Steam models 1 2 3 4 5 Steam Control Lock Sensing Wet Damp Cool Done Wrinkle Down Shield 6 Non-steam models 1 2 3 4 5 Control Lock Sensing Wet Damp Cool Done Wrinkle Down Shield 6 Cycle Status Indicators POWER BUTTON 1 The indicator bar in the display will let you know Press to turn the dryer on and off. what stage the drying cycle is in process. For Press to stop/cancel a cycle at any time. more informatio
ページ7に含まれる内容の要旨
Control Lock 6 CYCLE SIGNAL If the dryer is running: Use this button to turn the signal indicating the Press and hold the Cycle Signal button for 3 end of a drying cycle on or off. seconds to lock the controls of the dryer and avoid an accidental change in cycle options or settings during a drying cycle. Press and hold again for 3 seconds to unlock. To enable the Control Lock feature if the dryer is off, it is not necessary to press POWER before activating the Control Lock feature.
ページ8に含まれる内容の要旨
CYCLE GUIDE — AUTO CYCLES Settings and options shown in bold are default settings for that cycle. Not all features and cycles are available on all models. Not all settings and options are available on each cycle. Use Auto Cycles for better fabric care and energy savings The dryer senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level. Use the NORMAL dryness level to provide optimal energy savings. Items to dry: Cycle: Drying Dryness Def
ページ9に含まれる内容の要旨
CYCLE GUIDE — MANUAL AND STEAM CYCLES Settings and options shown in bold are default settings Steam for that cycle. Control Lock Control Lock Not all features and cycles are available on all models. Sensing Wet Damp Cool Done Wrinkle Sensing Wet Damp Cool Done Wrinkle Down Shield Down Shield Not all settings and options are available on each cycle. Steam cycles (on some models) are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics. Non-Steam model Steam mo
ページ10に含まれる内容の要旨
USING YOUR DRYER WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. 3. Press POWER 1. Clean the lint screen Press the POWER button to turn on the dryer. 4. Select the desired cycle Clean the lint screen before each load. Pull the lint screen straight up. Roll lint off the screen with your fingers. Do not rinse or wash screen to remove lint. Wet lint is hard to remove. Push the lint screen firmly
ページ11に含まれる内容の要旨
5. Adjust cycle settings, if desired 7. Remove garments pr omptly after cycle is finished Steam Control Lock Steam Control Lock Sensing Wet Damp Cool Done Wrinkle Down Shield Sensing Wet Damp Cool Done Wrinkle Down Shield Steam model shown Steam model shown Promptly remove garments after cycle has completed to reduce wrinkling. If you will be unable to remove the load promptly, select the You may adjust different settings, depending on whether Wrinkle Shield option before pressing START/PA
ページ12に含まれる内容の要旨
ADDITIONAL FEATURES DRYER CARE USING THE DRYING RACK CLEANING THE DRYER LOCATION To obtain a drying rack for your dryer, follow the instructions Keep dryer area clear and free from items that would included in your dryer drum. Remove and discard any block the air flow for proper dryer operation. This includes packing material before use. clearing piles of laundry in front of the dryer. Use the Drying Rack for items that you do not want to tumble dry, such as sweaters and tennis shoes. Wh
ページ13に含まれる内容の要旨
CLEANING THE LINT SCREEN NON-USE, STORAGE, AND MOVING CARE Every load cleaning Install and store your dryer where it will not freeze. Because some water may stay in the hose, freezing can damage The lint screen is located in the door opening of the dryer. your dryer. If storing or moving your dryer during freezing Be sure to clean the lint screen after each load. A screen weather, winterize it. blocked by lint can increase drying time. To clean: Non-Use or Storage Care Operate your dryer on
ページ14に含まれる内容の要旨
CHANGING THE DRUM LIGHT SPECIAL INSTRUCTIONS The dryer light automatically turns on inside the dryer drum FOR STEAM MODELS when you open the door. Water Inlet Hose To change the drum light: Replace inlet hose and hose screen after 5 years of use 1. Unplug dryer or disconnect power. to reduce the risk of hose failure. Periodically inspect and 2. Open the dryer door. Locate the light replace inlet hose if bulges, kinks, cuts, wear, or leaks bulb cover on the back wall of the dryer. are fou
ページ15に含まれる内容の要旨
TROUBLESHOOTING First try the solutions suggested here or visit our website at www.whirlpool.com/help for assistance and to possibly avoid a service call. If you experience Possible Causes Solution Dryer Operation Dryer will not run Make sure the dryer door is closed completely. Door not closed completely. Press and hold the START/PAUSE button 2-5 seconds. START/PAUSE button not pressed firmly or held long enough. Household fuse is blown or circuit There may be 2 household fuses or circuit
ページ16に含まれる内容の要旨
TROUBLESHOOTING First try the solutions suggested here or visit our website at www.whirlpool.com/help for assistance and to possibly avoid a service call. If you experience Possible Causes Solution Dryer Results (cont.) Separate the load to tumble freely. Clothes are not drying The load is too large and heavy satisfactorily or drying to dry quickly. times are too long Dryer sheets are blocking the grille. The air outlet grille is just inside the door, behind the lint screen. Check that it
ページ17に含まれる内容の要旨
First try the solutions suggested here or visit our website at www.whirlpool.com/help for assistance and to possibly avoid a service call. If you experience Possible Causes Solution Dryer Results (cont.) Recent painting, staining, or Odors Ventilate the area. When the odors or fumes are gone from varnishing in the area where your the area, rewash and dry the clothing. dryer is located. For steam cycles, the water is not Make sure water is connected to the dryer. Check that water properly
ページ18に含まれる内容の要旨
WHIRLPOOL CORPORATION LAUNDRY WARRANTY LIMITED WARRANTY For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or furnished with the product, Whirlpool Corporation or Whirlpool Canada LP (hereafter “Whirlpool”) will pay for Factory Speci ed Parts and repair labor to correct defects in materials or workmanship that existed when this major appliance was purchased. Service must be provided by a Whirlpool designated servi
ページ19に含まれる内容の要旨
SÉCURITÉ DE LA SÉCHEUSE 19
ページ20に含まれる内容の要旨
20
