ページ1に含まれる内容の要旨
Use & Care Guide
Guide d’utilisation et d’entretien
ELECTRONIC DRYER
SÉCHEUSE ÉLECTRONIQUE
Para obtener acceso
al Manual de uso y
cuidado en español, o para
obtener información adicional
acerca de su producto, visite:
www.whirlpool.com.
If you have any problems or questions, visit us at www.whirlpool.com
Pour tout problème ou question, consulter www.whirlpoolappliances.ca
W10305730B
W10305731B - SP
ページ2に含まれる内容の要旨
ELECTRONIC DRYER SÉCHEUSE ÉLECTRONIQUE TABLE OF CONTENTS Table de Matières DRYER SAFETY .................................................................................... 2 SÉCURITÉ DE LA SÉCHEUSE ............................................................... 19 ACCESSORIES ...................................................................................... 4 ACCESSOIRES .................................................................................... 21 CHECK YOUR VENT SYSTEM FOR GOOD
ページ3に含まれる内容の要旨
3
ページ4に含まれる内容の要旨
ACCESSORIES Enhance your new washer and dryer with the following genuine Worksurface Whirlpool accessories. For more information on options and The worksurface bridges ordering, call 1-800-901-2042, or visit us at: the washer and dryer, and www.whirlpool.com/accessories. In Canada, call provides a convenient working 1-800-807-6777 or visit us at www. whirlpoolparts.ca and storage area. 15" Pedestal Color matched pedestals raise the washer and dryer to a more comfortable working heig
ページ5に含まれる内容の要旨
CHECK YOUR VENT SYSTEM FOR GOOD AIR FLOW Maintain good air flow by: n Cleaning your lint screen before each load. n Replace plastic or foil vent material with 4" (102 mm) diameter heavy, rigid vent material. n Use the shortest length of vent possible. n Use no more than four 90° elbows in a vent system; each bend and curve reduces air flow. Good Better Good air flow Along with heat, dryers require good air flow to efficiently dry laundry. Proper venting will reduce your drying times
ページ6に含まれる内容の要旨
CONTROL PANEL AND FEATURES Not all features and cycles are available on all models. 11-cycle models 2 1 3 4 5 8 6 7 8-cycle models 2 1 3 4 5 7 6 3 START/PAUSE BUTTON 1 POWER BUTTON Press and hold to start a cycle, or press once while a Press to turn the dryer on and off. cycle is in process to pause it. Press to stop/cancel a cycle at any time. TIMED DRY ADJUST for MANUAL CYCLES 4 CYCLE CONTROL KNOB 2 Use these buttons with Manual Cycles to increase or Use your dryer’s cycle control knob
ページ7に含まれる内容の要旨
6 5 LED DISPLAY AND SETTINGS BUTTONS OPTION BUTTONS When you select a cycle, its default settings will light Use these buttons to select available options for your up and the Estimated Time Remaining (for Auto Cycles) dryer. Not all cycles and options are available on all or actual time remaining (for Manual Cycles) will be models. displayed. EcoBoost Use the buttons along the bottom of the display to adjust Press to activate the EcoBoost option. The EcoBoost settings. See Cycle Guide for
ページ8に含まれる内容の要旨
CYCLE GUIDE — AUTO CYCLES Settings and options shown in bold are default settings for that cycle. Not all features and cycles are available on all models. Not all settings and options are available on each cycle. Use Auto Cycles for better fabric care and energy savings The dryer senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level. Use the NORMAL dryness level to provide optimal energy savings. Items to dry: Cycle: Drying Dryness Def
ページ9に含まれる内容の要旨
CYCLE GUIDE — MANUAL CYCLES Settings and options shown in bold are default settings for that cycle. Not all features and cycles are available on all models. Not all settings and options are available on each cycle. Adjusting drying time on Manual Cycles Selecting the Drying Temperature Check Lint Screen Sensing WetDampCool Steam Static Done Wrinkle Down Reduce Shield Estimated Time Remaining High When you select a Manual Cycle, the default 8 - 9 A High heat setting may be used for drying heavywe
ページ10に含まれる内容の要旨
USING YOUR DRYER WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. 3. Press POWER 1. Clean the lint screen Press the POWER button to turn on the dryer. 4. Select the desired cycle Clean the lint screen before each load. Pull the lint screen straight up. Roll lint off the screen with your fingers. Do not rinse or wash screen to remove lint. Wet lint is hard to remove. Push the lint screen firmly
ページ11に含まれる内容の要旨
5. Adjust cycle settings, if desired 7. Press and hold START/PAUSE to begin cycle Check Lint Screen Sensing Wet Damp Cool Steam Static Done Wrinkle Down Reduce Shield Estimated Time Remaining High 8 - 9 Medium 6 - 7 Low More Dry 4 - 5 Loud Extra Low Normal Dry 2 - 3 Soft Timed Dry Adjust Air Only Less Dry 1 O Press and hold the START/PAUSE button to begin the cycle. 11-cycle model shown 8. Remove garments pr omptly You may adjust different settings, depending on whether you have selected
ページ12に含まれる内容の要旨
CYCLE STATUS INDICATORS ADDITIONAL FEATURES USING THE DRYING RACK Check Lint Screen Sensing Wet Damp Cool Steam Static Done Wrinkle Down Reduce Shield Estimated Time Remaining High 8 - 9 To obtain a drying rack for your dryer, follow the instructions Medium 6 - 7 included in your dryer drum. Remove and discard any Low More Dry 4 - 5 Loud packing material before use. Extra Low Normal Dry 2 - 3 Soft Use the Drying Rack for items that you do not want to Timed Dry Adjust Air Only Less Dry 1 O
ページ13に含まれる内容の要旨
DRYER CARE CLEANING THE DRYER LOCATION CLEANING THE LINT SCREEN Keep dryer area clear and free from items that would block the Every load cleaning air flow for proper dryer operation. This includes clearing piles The lint screen is located in the door opening of the dryer. of laundry in front of the dryer. The control panel has an indicator light to remind you to clean the lint screen after each load. A screen blocked by lint can increase drying time. To clean: 1. Pull the lint screen strai
ページ14に含まれる内容の要旨
NON-USE, STORAGE, AND MOVING CARE SPECIAL INSTRUCTIONS FOR STEAM MODELS Install and store your dryer where it will not freeze. Because some water may stay in the hose, freezing can damage Water Inlet Hose your dryer. If storing or moving your dryer during freezing Replace inlet hose and hose screen after 5 years of use weather, winterize it. to reduce the risk of hose failure. Periodically inspect and replace inlet hose if bulges, kinks, cuts, wear, or leaks Non-Use or Storage Care are f
ページ15に含まれる内容の要旨
TROUBLESHOOTING First try the solutions suggested here or visit our website at www.whirlpool.com/help for assistance and to possibly avoid a service call. If you experience Possible Causes Solution Dryer Operation Dryer will not run Make sure the dryer door is closed completely. Door not closed completely. Press and hold the START/PAUSE button 2-5 seconds. START/PAUSE button not pressed firmly or held long enough. Household fuse is blown or circuit There may be 2 household fuses or circuit
ページ16に含まれる内容の要旨
TROUBLESHOOTING First try the solutions suggested here or visit our website at www.whirlpool.com/help for assistance and to possibly avoid a service call. If you experience Possible Causes Solution Dryer Results (cont.) Separate the load to tumble freely. Clothes are not drying The load is too large and heavy satisfactorily or drying to dry quickly. times are too long Fabric softener sheets are blocking The air outlet grille is just inside the door, behind the lint screen. the grille. Che
ページ17に含まれる内容の要旨
First try the solutions suggested here or visit our website at www.whirlpool.com/help for assistance and to possibly avoid a service call. If you experience Possible Causes Solution Dryer Results (cont.) Recent painting, staining, or Odors Ventilate the area. When the odors or fumes are gone from varnishing in the area where your the area, rewash and dry the clothing. dryer is located. For steam cycles, the water is not Make sure water is connected to the dryer. Check that water properly
ページ18に含まれる内容の要旨
WHIRLPOOL CORPORATION LAUNDRY WARRANTY LIMITED WARRANTY For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or furnished with the product, Whirlpool Corporation or Whirlpool Canada LP (hereafter “Whirlpool”) will pay for Factory Speci ed Parts and repair labor to correct defects in materials or workmanship that existed when this major appliance was purchased. Service must be provided by a Whirlpool designated servi
ページ19に含まれる内容の要旨
SÉCURITÉ DE LA SÉCHEUSE 19
ページ20に含まれる内容の要旨
20
