ページ1に含まれる内容の要旨
CD RECEIVER
CD-RECEIVER
RECEPTEUR CD
CD-RECEIVER
KD-LX10R
SCM MONO LOCAL MODE ATT TP INT RPT RND
SEL 78 9 BAND S DISP SOURCE RDS PTY 10 11 12 OFF
S
M
KD-LX1 0R
For installation and connections, refer to the separate manual.
Angaben zu Einbau und Verkabelung entnehmen Sie bitte der gesonderten Anleitung.
Pour l’installation et les raccordements, se référer au manuel séparé.
Zie de afzonderlijke handleiding voor details aangaande het installeren en verbinden van het
toestel.
For Customer Use:
Ente
ページ2に含まれる内容の要旨
Position And Reproduction Of Labels Bottom panel of the main unit DANGER: Invisible laser ADVARSEL: Usynlig laser - VARNING: Osynlig las er- VARO: Avattaessa ja suo- radiation when open and stråling ved åbning, når strålning när denna del jalukitus ohitettaessa olet interlock failed or d efeated . sikkerhedsafbrydere er ude är öppnad och spärren är alttiina näkymättömälle AVOI D DIRECT EXPOSURE af funktion. Undgåudsæt- urkopplad. Betrakta ej lasersäteilylle. Älä katso TO BEAM. (
ページ3に含まれる内容の要旨
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit .................................................................... 2 BASIC OPERATIONS ....................................................5 RADIO BASIC OPERATIONS .........................................6 Listening to the radio ...........................................
ページ4に含まれる内容の要旨
OTHER MAIN FUNCTIONS .........................................29 Setting the clock ............................................................................ 29 Changing the general settings (PSM) ......................................... 30 Assigning names to CDs ............................................................... 34 Using the security lock ................................................................. 36 REMOTE OPERATIONS (With an optionally purchased remote controller) .... 3
ページ5に含まれる内容の要旨
BASIC OPERATIONS Note: When you use this unit for the first time, set the built-in clock correctly, see page 29. 1 3 2 1 Turn on the power. The display illuminates and the control panel comes out. 2 Select the source. Each time you press the button, the source changes as follows: = FM = DAB tuner**= CD* = CD changer** or External component** = AM = (back to the beginning) To operate the tuner, see pages 6 – 18. To operate the CD player, see pages 19 – 23. To operate the CD changer, see pages 41
ページ6に含まれる内容の要旨
RADIO BASIC OPERATIONS Listening to the radio You can use either automatic searching or manual searching to tune into a particular station. Searching a station automatically: Auto search LOCAL 1- 2 1- 1 2 MODE BAND 1 2 1 Select the band. 1 Press SOURCE (ATT) to select AM or FM as the source. 2 If necessary, press and hold MODE BAND to select the FM band number (FM1, FM2 or FM3). Each time you press the button, the FM band changes as follows: FM1 FM2 FM3 Selected band appears. Note: This receiver
ページ7に含まれる内容の要旨
Searching a station manually: Manual search MONO 1- 2 1- 1 2,3 MODE BAND 2 1 1 Select the band. 1 Press SOURCE (ATT) to select AM or FM as the source. 2 If necessary, press and hold MODE BAND to select the FM band number (FM1, FM2 or FM3). Note: This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast. 2 Press and hold ¢ or 4 until “M” (Manual) starts flashing on the display. 3 To tune into stations Tune into a station you want while of higher
ページ8に含まれる内容の要旨
Storing stations in memory You can use one of the following two methods to store broadcasting stations in memory. • Automatic preset of FM stations: SSM (Strong-station Sequential Memory) • Manual preset of both FM and AM stations FM station automatic preset: SSM You can preset 6 local FM stations in each FM band (FM1, FM2 and FM3). 1- 2 2 1- 1 1 2 1 Select the FM band number (FM1, FM2 or FM3) you want to store FM stations into. 1 Press SOURCE (ATT) to select FM as the source. 2 If necessary, pr
ページ9に含まれる内容の要旨
Manual preset You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually. EXAMPLE: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band 1- 2 1- 1 3 2 1 2 1 Select the band. 1 Press SOURCE (ATT) to select FM as the source. 2 Press and hold MODE BAND to select the FM1 band. 2 Tune into a station of 88.3 MHz. See page 6 to tune into a station. 3 Press and hold the number button (in this example, 1) for more than 2 seconds. FM band number and “MEMO” appear alt
ページ10に含まれる内容の要旨
Tuning into a preset station You can easily tune into a preset station. Remember that you must store stations first. If you have not stored them yet, see pages 8 and 9. 1- 2 1- 1 2 2 2 1 1 Select the band. 1 Press SOURCE (ATT) to select AM or FM as the source. 2 If necessary, press and hold MODE BAND to select the FM band number (FM1, FM2 or FM3). 2 Select the number (1 – 6) for the preset station you want. If the sound quality decreases and the stereo effect is lost while listening to an FM sta
ページ11に含まれる内容の要旨
RDS OPERATIONS What you can do with RDS EON RDS (Radio Data System) allows FM stations to send an additional signal along with their regular programme signals. For example, the stations send their station names, as well as information about what type of programme they broadcast, such as sports or music, etc. Another advantage of RDS function is called “EON (Enhanced Other Networks).” The EON indicator lights up while receiving an FM station with the EON data. By using the EON data
ページ12に含まれる内容の要旨
Mode 1 The AF indicator lights up but the REG indicator does not. Network-Tracking is activated with Regionalization set to “off.” Switches to another station within the same network when the receiving signals from the current station become weak. Note: In this mode, the programme may differ from the one currently received. Mode 2 Both the AF indicator and the REG indicator light up. Network-Tracking is activated with Regionalization set to “on.” Switches to another station, within the same netw
ページ13に含まれる内容の要旨
Using Standby Reception Standby Reception allows the unit to switch temporarily to your favorite programme (PTY: Programme Type) and Traffic Announcement (TA) from the current source (another FM station, CD and other connected components). Note: Standby Reception will not work if you are listening to an AM station. TA Standby Reception • When you press TP RDS while listening to an FM station, the TP indicator is lit during reception of a TP (Traffic Programme) station and the TA standby mode is
ページ14に含まれる内容の要旨
Selecting Your Favorite Programme for PTY Standby Reception You can select your favorite programme for PTY Standby Reception to store in memory. When shipped from the factory, “NEWS” is stored as the programme type for PTY Standby Reception. 1,4 3 2 1 Press and hold SEL (select) for more than 2 seconds to call up the Preferred Setting Mode (PSM: see page 30). 2 Select “PTY STBY (standby)” if not shown on the display. 3 Select one of twenty-nine PTY codes. (See page 17.) Selected code name appear
ページ15に含まれる内容の要旨
To store your favorite programme types 3 1,5 4 4 2 1 Press and hold SEL (select) for more than 2 seconds to call up the Preferred Setting Mode (PSM: see page 30). 2 Select “PTY SEARCH” if not shown on the display. 3 Select one of twenty-nine PTY codes. (See page 17.) Selected code name appears on the display. • If the code already stored in memory is selected, it will flash on the display. 4 Press and hold the number button for more than 2 seconds to store the PTY code selected into the preset n
ページ16に含まれる内容の要旨
To search your favorite programme type 1 2 2 1 Press and hold PTY (programme type) for more than 1 second while listening to an FM station. The last selected PTY code and preset number appear. 2 Select one of PTY codes stored in preset number buttons (1 to 6). Ex. When “ROCK M” is stored in preset number button 2. PTY search for your favorite programme starts after 5 seconds. • If there is a station broadcasting a programme of the same PTY code you selected, that station is tuned in. • If there
ページ17に含まれる内容の要旨
Other convenient RDS functions and adjustments Automatic selection of the station when using the number buttons Usually when you press the number button, the preset station is tuned in. However, when the preset station is an RDS station, something different will happen. If the signals from that preset station are not sufficient for good reception, this unit, using the AF data, tunes in another frequency broadcasting the same programme as the original preset station is broadcasting. In case no ot
ページ18に含まれる内容の要旨
Changing the display mode while listening to an FM station You can change the initial indication on the display to either station name (PS NAME) or to station frequency (FREQUENCY), while listening to an FM RDS station. • See also “Changing the general settings (PSM)” on page 30. 1. Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. 2. Press ¢ or 4 to select “TUNER DISP (display).” 3. Press + or – to set to the desired indication (“PS NAME”
ページ19に含まれる内容の要旨
CD OPERATIONS Playing a CD ¢ 4 1 1 Open the loading slot. The display panel moves down, and the loading slot appears. 2 Insert a disc into the loading slot. The unit draws a CD, the display panel moves up, and CD play starts automatically. Total track number Total playing time of Elapsed of the inserted disc the inserted disc playing time Current track Notes: • When a CD is in the loading slot, selecting “CD” as the source by pressing SOURCE (ATT) starts CD play. • Wh
ページ20に含まれる内容の要旨
Playing a CD Text In a CD Text, some information about the disc (its disc title, performer and track title) is recorded. You can show these disc information on the display. DISP Select text display mode while playing a CD Text. Each time you press the button, the display changes as follows: Disc Title / Performer Track Title Current track no. and Elapsed playing time Notes: • The display shows up to 10 characters at one time and scrolls if there are more than 10 characters. See also “To select t
