ページ1に含まれる内容の要旨
Use & Care Guide
Guide d’utilisation et d’entretien
ELECTRONIC DRYER
SÉCHEUSE ÉLECTRONIQUE
Para obtener acceso
al Manual de uso y
cuidado en español, o para
obtener información adicional
acerca de su producto, visite:
www.maytag.com.
If you have any problems or questions, visit us at www.maytag.com
Pour tout problème ou question, consulter www.maytag.ca
W10312954A
W10312957A - SP
ページ2に含まれる内容の要旨
ELECTRONIC DRYER SÉCHEUSE ÉLECTRONIQUE TAble OF CONTeNTS TAble de MATièreS DRYER SAFETY .......................................................................2 SÉCURITÉ DE LA SÉCHEUSE ...............................................19 ACCESSORIES ........................................................................4 ACCESSOIRES ......................................................................21 CHECK YOUR VENT SYSTEM FOR GOOD AIR FLOW ...........5 VÉRIFICATION D’UNE CIRCULATION D’AIR AD
ページ3に含まれる内容の要旨
3
ページ4に含まれる内容の要旨
ACCESSORIES Customize your new washer and dryer with the following Worksurface genuine Maytag accessories. For more information on options The worksurface bridges and ordering, contact your dealer, or visit: www.maytag.com. the washer and dryer, and provides a convenient working 15" Pedestal and storage area. Color matched pedestals raise the washer and dryer to a more comfortable working height. The large drawer provides convenient storage. Available in matching colors. Stack
ページ5に含まれる内容の要旨
CHECK YOUR VENT SYSTEM FOR GOOD AIR FLOW Maintain good air flow by: n Cleaning your lint screen before each load. n Replace plastic or foil vent material with 4" (102 mm) diameter heavy, rigid vent material. n Use the shortest length of vent possible. n Use no more than four 90° elbows in a vent system; each bend and curve reduces air flow. Better Good Good air flow Along with heat, dryers require good air flow to efficiently dry laundry. Proper venting will reduce your drying times
ページ6に含まれる内容の要旨
CONTROL PANEL AND FEATURES Not all features and cycles are available on all models. 11-cycle models 5 2 4 6 1 3 8 7 8-cycle models 5 6 2 4 1 3 3 STAr T/PAUSe bUTTON 1 POWer/CANCel bUTTON Press and hold to start a cycle, or press once while a Press to turn the dryer on and off. cycle is in process to pause it for up to 5 minutes. Press again to stop/cancel a cycle at any time. TiMed dr Y AdJUST for TiMed CYCleS 4 CYCle CONTrOl KNOb 2 Use these buttons with Timed Cycles to increase or Use
ページ7に含まれる内容の要旨
6 5 led diSPlAY ANd SeTTiNGS bUTTONS OPTiON bUTTONS When you select a cycle, its default settings will light up Use these buttons to select available options for your and the Estimated Time Remaining (for Sensor Cycles) or dryer. Not all cycles and options are available on all actual time remaining (for Timed Cycles) will be displayed. models. Use the buttons along the bottom of the display to adjust Wrinkle Prevent/Wrinkle Prevent with Steam settings. See Cycle Guide for available settings
ページ8に含まれる内容の要旨
CYCLE GUIDE — SENSOR CYCLES Settings and options shown in bold are default settings for that cycle. Not all features and cycles are available on all models. Not all settings and options are available on each cycle. Use Sensor Cycles for better fabric care and energy savings The dryer senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level. Use the NORMAL dryness level to provide optimal energy savings. items to dry: Cycle: drying dryness
ページ9に含まれる内容の要旨
CYCLE GUIDE — TIMED CYCLES Settings and options shown in bold are default settings for that cycle. Not all features and cycles are available on all models. Not all settings and options are available on each cycle. Adjusting drying time on Timed Cycles Selecting the drying Temperature When you select a Timed Cycle, the default A High heat setting may be used for drying heavyweight items time appears in the display. Use the + and – such as towels and work clothes. + buttons to increase or decre
ページ10に含まれる内容の要旨
USING YOUR DRYER WArNiNG: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. 3. Press POWer 1. Clean the lint screen Press the POWER button to turn on the dryer. 4. Select the desired cycle Clean the lint screen before each load. Pull the lint screen straight up. Roll lint off the screen with your fingers. Do not rinse or wash screen to remove lint. Wet lint is hard to remove. Push the lint screen firmly
ページ11に含まれる内容の要旨
5. Adjust cycle settings, if desired 7. Press and hold STAr T/PAUSe to begin cycle + - Press and hold the START/PAUSE button to begin the cycle. temp level dryness level damp signal 11-cycle model shown 8. r emove garments promptly You may adjust different settings, depending on whether you have selected a Sensor Cycle, Timed Cycle, or Steam Cycle. after cycle is finished See the Cycle Guide for detailed information. NOTe: Not all options and settings are available with all cycles. Not al
ページ12に含まれる内容の要旨
CYCLE STATUS INDICATORS ADDITIONAL FEATURES USiNG THe dr YiNG rACK To obtain a drying rack for your dryer, follow the instructions + included in your dryer drum. Remove and discard any packing material before use. Use the Drying Rack for items that you do not want to tumble dry, such as sweaters and tennis shoes. When you - use the drying rack, the drum continues to turn, but the rack temp level dryness level damp signal remains stationary. The drying rack is intended for use with the Ti
ページ13に含まれる内容の要旨
DRYER CARE CleANiNG THe dr Yer lOCATiON CleANiNG THe liNT SCreeN Keep dryer area clear and free from items that would block the every load cleaning air flow for proper dryer operation. This includes clearing piles The lint screen is located in the door opening of the dryer. of laundry in front of the dryer. The control panel has an indicator light to remind you to clean the lint screen before each load. A screen blocked by lint can increase drying time. To clean: 1. Pull the lint screen str
ページ14に含まれる内容の要旨
VACATiON, STOrAGe, ANd MOViNG CAre SPeCiAl iNSTrUCTiONS FOr STeAM MOdelS Install and store your dryer where it will not freeze. Because some water may stay in the hoses, freezing can damage Water inlet Hose your dryer. If storing or moving your dryer during freezing Replace inlet hose and hose screen after 5 years of use weather, winterize it. to reduce the risk of hose failure. Periodically inspect and replace inlet hose if bulges, kinks, cuts, wear, or leaks Non-Use or Storage Care are
ページ15に含まれる内容の要旨
TROUBLESHOOTING First try the solutions suggested here or visit our website at www.maytag.com/help for assistance and to possibly avoid a service call. if you experience Possible Causes Solution dryer Operation Dryer will not run Make sure the dryer door is closed completely. Door not closed completely. Press and hold the START/PAUSE button 2-5 seconds. START/PAUSE button not pressed firmly or held long enough. Household fuse is blown or circuit There may be 2 household fuses or circuit bre
ページ16に含まれる内容の要旨
TROUBLESHOOTING First try the solutions suggested here or visit our website at www.maytag.com/help for assistance and to possibly avoid a service call. if you experience Possible Causes Solution dryer results (cont.) Separate the load to tumble freely. Clothes are not drying The load is too large and heavy satisfactorily or drying to dry quickly. times are too long Fabric softener sheets are blocking The air outlet grille is just inside the door, behind the lint screen. the grille. Check
ページ17に含まれる内容の要旨
First try the solutions suggested here or visit our website at www.maytag.com/help for assistance and to possibly avoid a service call. if you experience Possible Causes Solution dryer results (cont.) Recent painting, staining, or Odors Ventilate the area. When the odors or fumes are gone from varnishing in the area where your the area, rewash and dry the clothing. dryer is located. For steam cycles, the water is not Make sure water is connected to the dryer. Check that water properly co
ページ18に含まれる内容の要旨
® MAYTAG LAUNDRY WARRANTY LIMITED WARRANTY For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or furnished with the product, Maytag brand of Whirlpool Corporation or Whirlpool Canada LP (hereafter “Maytag”) will pay for factory speci ed parts and repair labor to correct defects in materials or workmanship that existed when this major appliance was purchased. Service must be provided by a Maytag designated service
ページ19に含まれる内容の要旨
SÉCURITÉ DE LA SÉCHEUSE 19
ページ20に含まれる内容の要旨
20
