ページ1に含まれる内容の要旨
CD RECEIVER KD-BT11
RECEPTOR CON CD KD-BT11
RÉCEPTEUR CD KD-BT11
For canceling the display demonstration, see page 4.
Para cancelar la demostración en pantalla, consulte la página 4.
Pour annuler la démonstration des affichages, référez-vous à la page 4.
For installation and connections, refer to the separate manual.
For customer Use:
Para la instalación y las conexiones, refiérase al manual separado.
Enter below the Model
Pour l’installation et les raccordements, se référer au manuel séparé
ページ2に含まれる内容の要旨
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates
ページ3に含まれる内容の要旨
How to reset your unit CONTENTS INTRODUCTIONS Preparation .................................................. 4 OPERATIONS Basic operations ........................................... 5 • Using the control panel ............................... 5 • Your preset adjustments will also be erased (except the • Using the remote controller (RM-RK50) ...... 6 registered Bluetooth device, see pages 10 and 11). Listening to the radio ................................... 8 How to forcibly eject a disc Di
ページ4に含まれる内容の要旨
Preparation Cancel the display demonstration and set the clock • See also page 23. Turn on the power. 1 Enter the PSM settings. 2 Cancel the display demonstrations 3 Select “DEMO,” then “DEMO OFF.” Set the clock Select “CLOCK HOUR,” then adjust the hour. Select “CLOCK MIN” (minute), then adjust the minute. Finish the procedure. 4 When the power is turned off: Check the current clock time When the power is turned on: Change the display information of the current source 1 FM/AM Frequency = Clo
ページ5に含まれる内容の要旨
Basic operations Using the control panel 1 • FM/AM: Select preset station. r • Adjust the sound mode. • HD RADIO: Select channel. • Enter the PSM settings [Hold]. • SIRIUS/XM: Select category. t • Enter functions mode. • CD/CD-CH: Select folder. Press M MODE, then one of the following buttons • IPOD: Enter the main menu/Pause playback/ (within 5 seconds)... Confirm selection. MO : Turn on/off monaural reception. 2 Eject disc. SSM : Automatic station presetting [Hold]. 3 • Turn on the powe
ページ6に含まれる内容の要旨
Display window 1 Status of Bluetooth device 7 Playback mode / item indicators— RND (random), (Device number, [1 – 5]; signal strength, [0 – 3]*; (disc), (folder), RPT (repeat) battery reminder, [0 – 3]*) 8 Tuner reception indicators—ST (stereo), * As the number increases, the signal/battery power MO (monaural) becomes stronger. 9 HOLD indicator 2 Tr (track) indicator p HD (HD Radio) indicator 3 Source display / Track number / Folder number / q LOUD (loudness) indicator Time countdown indic
ページ7に含まれる内容の要旨
7 • Searches for stations if pressed briefly. • Fast-forwards or reverses the track if pressed and held. • Changes the tracks if pressed briefly. • While listening to the satellite radio: – Changes the channels if pressed briefly. – Changes the channels rapidly if pressed and held. • While listening to an iPod (in menu selecting mode): – Selects an item if pressed briefly. (Then, press D ∞ to confirm the selection.) – Skips 10 items at a time if pressed and held. 1 • Turns the power
ページ8に含まれる内容の要旨
Listening to the radio Select “FM/AM.” 1 Select the bands. 2 Search for a station to listen—Auto Search. 3 Manual Search: Hold either one of the buttons until “M” flashes on the display, then press it repeatedly. • When receiving an FM stereo broadcast with sufficient signal strength, “ST” lights up on the display. • If an HD Radio tuner box is connected, you can also When an FM stereo broadcast is search and store the AM station automatically. hard to receive Manual presetting Ex.: Storin
ページ9に含まれる内容の要旨
Disc operations All tracks will be played repeatedly until you change the To stop play and eject the disc source or eject the disc. • Press SRC to listen to another playback source. Prohibiting disc ejection To cancel the prohibition, repeat the same procedure. Pressing (or holding) the following buttons allows After pressing M MODE, press the following buttons... you... Skip 10 tracks [Press] Select track MP3/WMA: Within the same folder [Hold] Reverse/fast-forward track TRACK RPT: MP3: Selec
ページ10に含まれる内容の要旨
Using the Bluetooth ® devices Connecting a Bluetooth device for the first time Pairing and PIN code Bluetooth is a short-range wireless radio When you connect a Bluetooth device to the unit communication technology for the mobile device such for the first time, make pairing between the unit as mobile phones, portable PCs, and other devices. The and the device. Pairing allows Bluetooth devices to Bluetooth devices can be connected without cables and communicate with each other. communica
ページ11に含まれる内容の要旨
1 Move to the next (or previous) number Connecting a registered device (PHONE/ position. AUDIO) Perform steps 1 and 2 on page 10, then... 1 Select “CNNCT PHONE” or “CNNCT AUDIO.” 2 Select a number. 2 Select a device you want. 3 Repeat steps 1 and 2 until you finish entering a PIN code. “CONNECTING” flashes, then “CONNECTED” appears 4 Confirm the entry. on the display when the device is connected. You can set the unit to connect the Bluetooth device automatically when the unit is turned o
ページ12に含まれる内容の要旨
Using the Bluetooth cellular phone Establish the connection with a device. 1 — (See pages 10 and 11.) Enter Bluetooth menu. 2 Select “CALL,” then make a call or settings using the 3 “SETTINGS” menu. (See the following and page 26.) When a call comes in.... When a text message comes in.... The source is automatically changed to “BLUETOOTH,” If the cellular phone is compatible with text message then “RCV CALL” (receive call) and the phone number notification via Bluetooth and “MSG NOTICE” (mess
ページ13に含まれる内容の要旨
• PHONEBOOK: Shows the 1st listed name/phone To delete the phone numbers number of the phone book of the unit = go to • Make sure that the Bluetooth phone is connected. the following step. To transfer the phone book 1 Display the phone number you want to memory, see page 26. delete by using one of the “CALL” items. • PRESET: Shows the list of preset numbers. = go to the following step. 2 Select the phone number (or name). • DIAL NUMBER: Shows the phone number entry screen = “How to enter
ページ14に含まれる内容の要旨
Presetting the phone number To call a preset number You can preset up to six phone numbers. While in Bluetooth source.... 1 Display the phone number you want to preset by using one of the “CALL” items. 2 Select a phone number. • You can also call a preset number using “PRESET” of the “CALL” items (see page 13). Switching conversation media (the unit/ cellular phone) 3 Select a preset number to store. During a phone call conversation.... Then, continue your conversation using the other media.
ページ15に含まれる内容の要旨
Listening to the HD Radio ™ Broadcast Before operating, connect HD Radio tuner box, KT-HD300 (separately purchased) to the CD changer jack on the rear of the unit. (Refer also to page 8 for basic radio operations.) What is HD Radio Technology? HD Radio Technology can deliver high-quality digital sound—AM digital will have FM-like quality (in stereo) and FM digital will have CD-like quality—with static-free and clear reception. Furthermore, stations can offer text and data, such as artist name
ページ16に含まれる内容の要旨
Listening to the CD changer It is recommended to use a JVC MP3-compatible CD changer (separately purchased) with your unit. You can connect a CD changer to the CD changer jack on the rear of the unit. • You can only play conventional CDs (including CD Text) and MP3 discs. Preparation: Make sure “CHANGER” is selected for the external input setting, see page 25. Select “CD-CH.” 1 Select a disc to start playing. 2 [Press] For selecting disc number 1 – 6. [Hold] For selecting disc number 7 – 12. Af
ページ17に含まれる内容の要旨
Listening to the satellite radio Before operating, connect either one of the following (separately purchased) to the CD changer jack on the rear of this unit. • JVC SIRIUS Satellite radio interface, KS-SRA100, for listening to the SIRIUS Satellite radio. • JVC Smart Digital Adapter, XMDJVC100, for listening to the XM Satellite radio. GCI (Global Control Information) update • If channels are updated after subscription, updating starts automatically. “UPDATING” flashes and no sound can be heard.
ページ18に含まれる内容の要旨
Select “SIRIUS” or “XM.” 1 Select the bands. 2 SIRIUS: XM: Select a category. 3 SIRIUS: If you select “ALL,” you can tune in to all the channels of all categories. Select a channel to listen. 4 • Holding the button changes the channels rapidly. • While searching, invalid and unsubscribed channels are skipped. XM: If you do not select a channel within 15 seconds, category selected in step 3 is canceled. You can select all channels of all categories now (including non- categorised channels). Ch
ページ19に含まれる内容の要旨
Listening to the iPod Before operating, connect the Interface adapter for iPod, KS-PD100 (separately purchased) to the CD changer jack on the rear of the unit. Preparation: Make sure “CHANGER” is selected for the external input setting, see page 25. Select “IPOD.” 1 Select a song to start playing. 2 Selecting a track from the menu Pause/stop playback • To resume playback, press the button 1 Enter the main menu. again. [Press] Select tracks [Hold] Reverse/fast-forward track This mode will be
ページ20に含まれる内容の要旨
Listening to the other external components You can connect an external component to: • CD changer jack on the rear of this unit using the following adapters (separately purchased): – Line Input Adapter, KS-U57 – AUX Input Adapter, KS-U58 Preparation: Make sure “EXT INPUT” is selected for the external input setting, see page 25. • AUX (auxiliary) input jack on the control panel. Select “EXT INPUT” or “AUX IN.” 1 Turn on the connected component and start playing the source. — 2 Adjust the volum
