ページ1に含まれる内容の要旨
ABS Laundry
Samsung Dryer
Model DV316LG
Maytag Technical Institute 2006 ABS-L2006-002
ページ2に含まれる内容の要旨
Notes:
ページ3に含まれる内容の要旨
CLOTHES DRYER Model : DV316LG Basic Model : Model code : DV316LGW/XAA Manual SERVICE CLOTHES DRYER THE FEATURE OF PRODUCT 1. Energy Saving 2. Time Saving 3. Super Size Capacity 4. Fuzzy Algorithm 5. Easy Reversible Door
ページ4に含まれる内容の要旨
Samsung Electronics Co.,Ltd. -This Service Manual is a property of Samsung 416, Maetan-3Dong, Yeongtong-Gu, Suwon City, Electronics Co., Ltd. Gyeonggi-Do, Korea, 443-742 Any unauthorized use of Manual can be punished Printed in Korea under applicable International and/or domestic P/N : DC law. URL : http://itself.sec.samsung.co.kr/
ページ5に含まれる内容の要旨
CONTENTS 1. Precautions 1-1. Safety Precautions ............................................................................................................................1-1 1-2. Precautions upon Installation ............................................................................................................1-2 2. PRODUCT SPECIFICATIONS 2-1. THE FEATURE OF PRODUCT .........................................................................................................2-1 2-2. SPECIFICA
ページ6に含まれる内容の要旨
CONTENTS 8. ELECTRICAL PARTS LIST .....................................................................................................................8-1 9. BLOCK DIAGRAM ..................................................................................................................................9-1 10. WIRING DIAGRAM .............................................................................................................................10-1 11. PCB DIAGRAM ........................
ページ7に含まれる内容の要旨
1. Do not allow the customer to repair the product. The person may be injured or the product life may be shortened.. 2. Execute A/S after unplugging the power supply unit. Be careful of the electric shocks. 3. Do not plug several plugs in the same outlet. It may cause a fire due to overheat. 4. Check for damage, pressing or burning of the power plug or outlet. Replace it promptly if it has a problem.(It may cause the electric shocks or fire) 5. Do not clean the main body with
ページ8に含まれる内容の要旨
15. Do not push the control buttons with an awl,pin, or sharp materials. It may cause electric shocks and damage. 16. Check the wash machine is leveled horizontally and installed properly on the floor. The vibration may shorten the product life.. To avoid risk of fire, electric shock, serious injury, or death when using your dryer, follow these basic precau- tions: 1. Read all instructions before using dryer. 2. Install dryer according to Installation Instructions. Refer to the Grounding In
ページ9に含まれる内容の要旨
16. Always clean the lint filter after every load. A layer of lint in the filter reduces drying efficiency and pro longs drying time. 17. Use only fabric softeners or products to eliminate static that are appropriate for automatic dryers. 18. Keep your dryer in good condition. Bumping or dropping dryer can damage safety features. If damage occurs, have dryer checked by qualified service technician. 19. Replace worn power cords and/or loose plugs. 20. Do not tumble fiberglass curtains and
ページ10に含まれる内容の要旨
Electrical Dryers - 240 VAC, 60 Hz, 30 Amps, 3-wire or 4-wire installations To avoid risk of personal injury or death due Gas Dryers to electrical shock: - 120 VAC, 60 Hz, 15 Amps, 3wire installa- - Observe all local codes and ordinances. tions - Disconnect electrical power to unit before servicing. About Ground Wires - Ground appliance properly. In the event of an electrical short circuit, a - Check with a qualified electrician if you are not sure this appliance is properly gr
ページ11に含まれる内容の要旨
connection to the main power panel. -The round hole connection is not This equipment MUST be grounded. In the connected to a ground and/or the main power event of an electrical short circuit, grounding panel. reduces the risk of electric shock by providing an escape wire for the electrical current. This unit is equipped with a cord having a ground- ing wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded. Consult a qualified elec
ページ12に含まれる内容の要旨
Tools needed for installation Proper installation is the owner’s responsibility. HOWEVER, SERVICE CALLS PERFORMED AS A RESULT OF POOR SET-UP, ADJUSTMENT, AND CONNECTION ARE THE RESPONSIBILITY OF THE INSTALLER. Make sure you have everything necessary for proper installation. 1. GROUNDED ELECTRICAL OUTLET is required. See Electrical Requirements. 2. POWER CORD for electric dryers (except Canada). 3. GAS LINES (if a gas dryer) must meet national and local codes. 4. EXHAUST SYSTEM – must be ri
ページ13に含まれる内容の要旨
DUCTING REQUIREMENTS • Use a 4-inch (10.2 cm) diameter rigid aluminum or rigid galvanized steel duct. • Do not use a smaller duct. • Ducts larger than 4 inches (10.2 cm) in diameter can result in increased lint accumulation. Lint accumulation should be cleaned regularly. • If a fl exible metal duct must be used, use the type with a stiff sheet metal wall. Do not use a fl exible duct with a thin foil wall. Serious blockage can result if the fl exible metal duct is bent too sharply. • Never
ページ14に含まれる内容の要旨
If new dryer is installed into an existing exhaust system you must make sure: • The exhaust system meets all local, state, and national codes. • That fl exible plastic duct is not used. • Inspect and clean all lint buildup from inside the existing duct. • The duct is not kinked or crushed. • The exhaust hood damper opens and closes freely. The static pressure in any exhaust system must not exceed 0.83 inches of water column, or be less than 0. This can be measured with the dryer running wit
ページ15に含まれる内容の要旨
MOBILE HOME INSTALLATION The installation of the dryer in mobile homes must conform to the Manufactured Home Construction and Safety Standard Title 24 CFR, Part 32-80 {formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD (Part 280), 1975} for the United States) or CSA Standards Z240 (for Canada). When installing a dryer in a mobile home, provisions for anchoring the dryer to the fl oor must be made. Locate in an area that has adequate fresh air. A minimum of 7
ページ16に含まれる内容の要旨
GAS REQUIREMENTS Use only natural or LP (liquid propane) gases. THE INSTALLATION MUST CONFORM WITH LOCAL CODES, OR IN THE ABSENCE OF LOCAL CODES, WITH THE NATIONAL FUEL GAS CODE ANSI/Z223.1, LATEST REVISION (FOR THE UNITED STATES), OR WITH THE CAN/CGA-B149 INSTALLATION CODES (FOR CANADA). Gas dryers are equipped with a burner vent for use with natural gas. If you plan to use your dryer with LP (liquid propane) gas, it must be converted for safe and proper performance by a qualifi ed service te
ページ17に含まれる内容の要旨
ELECTRICAL REQUIREMENTS NOTE: Wiring diagram is located on plate below the control panel. WARNING – • Improper connection of the equipment grounding conductor can result in a risk of electric shock. Check with a qualifi ed electrician or serviceman if you are in doubt as to whether your dryer is properly grounded. Do not modify the plug provided with your dryer – if it doesn’t fi t the outlet, have a proper outlet installed by a qualifi ed electrician. • To prevent unnecessary risk of fi re, el
ページ18に含まれる内容の要旨
ELECTRICAL CONNE CTIONS Before operating or testing, follow all grounding instructions in the Grounding section. An individual branch (or separate) circuit serving only your dryer is recommended. DO NOT USE AN EXTENSION CORD. GAS MODELS – U.S. and Canada A 120 volt, 60 Hz AC approved electrical service, with a 15-ampere fuse or circuit breaker is required. ELECTRIC MODELS – U.S. Only Most U.S. dryers require a 120/240 volt, 60 Hz AC approved electrical service. Some require 120/208 volt,
ページ19に含まれる内容の要旨
INSTALLATION Parts and literature are packaged inside your dryer drum. To install: 1. Move your dryer to an appropriate location for installation. Consider installing the dryer and washer side-by-side, to allow access to gas, electrical, and exhaust connections. Lay two of the carton cushion-tops on the fl oor. Tip your dryer on its side so it will lay across both cushion-tops. 2. Set your dryer back in an upright position. 3. Review the Exhausting section before installing the exhaust sys
ページ20に含まれる内容の要旨
3-WIRE SYSTEM CONNECTIONS 1. Loosen or remove center terminal block screw. 2. Connect neutral wire (white or center wire) of the power cord to the center, silver-colored terminal screw of the terminal block. Tighten screw. 3. Connect the other wires to outer terminal block screws. Tighten screws. 4. Tighten strain relief screws. 5. Insert tab of terminal block cover into your dryer’s rear panel slot. Secure cover with hold-down screw. • External ground connector • Neutral grounding
