ページ1に含まれる内容の要旨
CD RECEIVER
RECEPTEUR CD
KD-G111
For canceling the display demonstration, see page 7.
Pour annuler la démonstration des affichages, référez-vous à la page 7.
For installation and connections, refer to the separate manual.
Pour l’installation et les raccordements, se référer au manuel séparé.
INSTRUCTIONS
MANUEL D’INSTRUCTIONS
GET0253-003A
[EX/EU]
Cover_KD-G111[EX_EU]f.indd 2 10/11/04, 10:13:51 PM
FRANÇAIS ENGLISH
ページ2に含まれる内容の要旨
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. Avoid dire
ページ3に含まれる内容の要旨
Contents How to reset your unit ........................... 2 Sound adjustments ................ 12 How to forcibly eject a disc................... 2 Selecting preset sound modes How to read this manual........................ 4 (C-EQ: custom equalizer) .................. 12 How to use the MODE button ............... 4 Adjusting the sound............................... 13 Control panel — KD-G111......... 5 General settings — PSM ......... 14 Parts identification.................................
ページ4に含まれる内容の要旨
How to read this manual How to use the MODE button The following methods are used to made the If you press MODE, the receiver goes into explanations simple and easy-to-understand: functions mode, then the number buttons work Some related tips and notes are explained in as different function buttons. “More about this receiver” (see page 17). Button operations are mainly explained with Ex.: When number button 2 works as the illustrations as follows: MO (monaural) button. Press briefly. Pr
ページ5に含まれる内容の要旨
Control panel — KD-G111 Parts identification Display window 1 +/– buttons Display window 2 DISP (display) button o Tuner reception indicators 3 Loading slot MO (monaural), ST (stereo) 4 Display window ; CD indicator 5 MODE button a RND (disc random) indicator s RPT (repeat) indicator 6 0 (eject) button d LOUD (loudness) indicator 7 ¢/4 buttons f EQ (equalizer) indicator 8 (standby/on/attenuator) button g Sound mode (C-EQ: custom equalizer) 9 SEL (select) button indicators p MO (monaural) bu
ページ6に含まれる内容の要旨
Getting started Basic operations To drop the volume in a moment (ATT) ~ To restore the sound, press it again. Ÿ To turn off the power You cannot select “CD” as the playback source if there is no disc in the loading slot. Caution on volume setting: Discs produce very little noise compared ! with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level. Volume level appears. Volume level indicator ⁄ Adjust the soun
ページ7に含まれる内容の要旨
Canceling the display Setting the clock demonstrations 1 If no operations are done for about 20 seconds, display demonstration starts. [Initial: DEMO ON]—see page 14. 2 Set the hour and minute. 1 Select “CLOCK H” (hour), then 1 adjust the hour. 2 Select “CLOCK M” (minute), then adjust the minute. 2 3 Finish the procedure. 3 To check the current clock time when the power is turned off 4 Finish the procedure. To activate the display demonstration In step 3 above... 7 EN06-09_KD-G111[EX_E
ページ8に含まれる内容の要旨
Radio operations Listening to the radio 2 Select the desired station frequencies. ~ Lights up when receiving an FM stereo broadcast with sufficient signal strength. When an FM stereo broadcast is hard to receive Selected band appears. 1 Ÿ Start searching for a station. 2 When a station is received, searching stops. Lights up when monaural mode is activated. To stop searching, press the same button again. To tune in to a station manually In step Ÿ above... Reception improves, but stereo
ページ9に含まれる内容の要旨
2 Storing stations in memory You can preset six stations for each band. FM station automatic presetting — SSM (Strong-station Sequential Memory) 1 Select the FM band (FM1 – FM3) 3 you want to store into. 2 Preset number flashes for a while. 3 Listening to a preset station 1 2 Select the preset station (1 – 6) you want. “SSM” flashes, then disappears when automatic presetting is over. Local FM stations with the strongest signals are searched and stored automatically in the FM band. To
ページ10に含まれる内容の要旨
Disc operations Playing a disc All tracks will be played repeatedly until you To fast-forward or reverse the track stop playback. Fast-forwards. Reverses. To go to the next or previous tracks To the following Total playing time of Total track number tracks. the inserted disc of the inserted disc To the beginning of the current track, then the previous tracks. Elapsed playing Current track To go to a particular track directly time number To select a number from 01 – 06: To stop play and
ページ11に含まれる内容の要旨
To check the current clock time while Prohibiting disc ejection listening to a disc You can lock a disc in the loading slot. To cancel the prohibition, repeat the same procedure. Selecting the playback modes You can use only one of the following playback modes at a time. 1 2 Select your desired playback mode. Repeat play Mode Plays repeatedly TRK RPT: The current track. RPT lights up. RPT OFF: Cancels repeat play. Ex.: When “TRK RPT” is selected Random play Mode Plays at random DISC RND:
ページ12に含まれる内容の要旨
Sound adjustments Selecting preset sound modes (C-EQ: custom equalizer) You can select a preset sound mode suitable to Preset values the music genre. Indication For: 1 2 3 * * * BAS TRE LOUD USER (Flat sound) 00 00 OFF ~ ROCK Rock or disco +03 +01 ON music CLASSIC Classical +01 –02 OFF music POPS Light music +04 +01 OFF HIP HOP Funk or rap +02 00 ON music Ex.: When “ROCK” is selected JAZZ Jazz music +02 +03 OFF 1 * BAS: Bass Indication pattern for each sound mode: 2 * TRE: Treble 3 * LOUD: Lo
ページ13に含まれる内容の要旨
Indication To do: Range Adjusting the sound 1 BAS* Adjust the bass. –06 (min.) You can adjust the sound characteristics to your (bass) to preference. +06 (max.) 1 TRE* Adjust the treble. –06 (min.) 1 (treble) to +06 (max.) 2 FAD* Adjust the front R06 (Rear (fader) and rear speaker only) balance. to F06 (Front only) Ex.: When “TRE” is selected BAL Adjust the left L06 (Left (balance) and right speaker only) balance. to 2 R06 (Right only) 1 LOUD* Boost low and LOUD ON (loudness) high
ページ14に含まれる内容の要旨
General settings — PSM 3 Adjust the PSM item selected. Basic procedure You can change PSM (Preferred Setting Mode) items listed on the table that follows. 1 4 Repeat steps 2 and 3 to adjust the other PSM items if necessary. 2 Select a PSM item. 5 Finish the procedure. Ex.: When you select “AMP GAIN” Indications Selectable settings, [reference page] DEMO DEMO ON: [Initial]; Display demonstration will be activated Display demonstration automatically if no operation is done for about 20 seco
ページ15に含まれる内容の要旨
Detaching the control panel When detaching or attaching the control panel, Attaching the control panel be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power. 15 EN14-19_KD-G111[EX_EU]f.indd 15 10/8/04, 12:15:41 PM ENGLISH
ページ16に含まれる内容の要旨
Maintenance How to clean the connectors To keep discs clean Frequent detachment will deteriorate the A dirty disc may not play correctly. connectors. If a disc does become dirty, wipe To minimize this possibility, periodically wipe it with a soft cloth in a straight line the connectors with a cotton swab or cloth from center to edge. moistened with alcohol, being careful not to Do not use any solvent (for damage the connectors. example, conventional record cleaner, spray, thinner, benzin
ページ17に含まれる内容の要旨
More about this receiver Some CD-Rs or CD-RWs may not play Basic operations back on this receiver because of their disc Turning off the power characteristics, and for the following causes: If you turn off the power while listening to a – Discs are dirty or scratched. disc, disc play will start from where playback – Moisture condensation occurs on the lens has been stopped previously, next time you inside the receiver. turn on the power. – The pickup lens inside the receiver is dirty.
ページ18に含まれる内容の要旨
Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Causes Remedies Sound cannot be heard The volume level is set to Adjust it to the optimum from the speakers. the minimum level. level. Connections are incorrect. Check the cords and connections. The receiver does not The built-in microcomputer Reset the receiver (see page work at all. may have functioned 2). incorrectly due to noise, etc. SSM automatic
ページ19に含まれる内容の要旨
Specifications AUDIO AMPLIFIER SECTION CD PLAYER SECTION Maximum Power Output: Type: Compact disc player Front: 45 W per channel Signal Detection System: Non-contact optical Rear: 45 W per channel pickup (semiconductor laser) Continuous Power Output (RMS): Number of channels: 2 channels (stereo) Front: 17 W per channel into 4 Ω , 40 Hz Frequency Response: 5 Hz to 20 000 Hz to 20 000 Hz at no more than 0.8% Dynamic Range: 96 dB total harmonic distortion. Signal-to-Noise Ratio: 98 dB Rear: 1
ページ20に含まれる内容の要旨
Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Vous avez des PROBLÈMES de fonctionnement? Réinitialisez votre appareil Référez-vous à la page intitulée Comment réinitialiser votre appareil EN, FR © 2004 Victor Company of Japan, Limited 1004DTSMDTJEIN Rear_KD-G111[EX_EU]f.indd 2 10/8/04, 12:15:49 PM
