ページ1に含まれる内容の要旨
JLTDC01
condenser dryer with heat pump
Instruction manual
ページ2に含まれる内容の要旨
1Important Safety Information It is most important that this instruction manual should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appli- ance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings. These warnings have been provided in the interest of safety. You MUST read them car
ページ3に含まれる内容の要旨
2 Ecological hints To save energy we recommend that you follow these hints: Try to load the maximum capacity of the machine as small loads are uneconomical. Always load well spun laundry. The higher the spin speed, the lower the electricity consumtion and the shorter the drying times. Do not over-dry laundry, this avoids creasing and saves energy. Clean the filters regularly to avoid excessive drying times and high electricity consumption. The room should be well ventilated for the tum
ページ4に含まれる内容の要旨
Contents For the User For the Installer Important Safety Information 2 Installation 6 Description of the Appliance 5 Technical Specifications 6 Unpacking 7 The Control Panel 10 Transporting the appliance 7 Programme Chart 12 Positioning 7 Stacking kit (optional accessory 7 Using the tumble dryer 13 Door reversal 8 Hints & Tips on Drying 15 Electrical connection 9 Maintenance and Cleaning 16 External cleaning 16 Cleaning the filters 16 Cleaning the door 16 Cleaning the door seal 16 Cleaning the
ページ5に含まれる内容の要旨
Description of the Appliance Display panel Water reservoir Fine strainer (lint filter) Lamp for interior illumination Large mesh filter Micro-fine filter (lint filter) (lint filter) Rating plate Loading door (reversible) Base door upstream of fluff filter and Screwed feet heat exchanger (with height adjustment) Air slots 5
ページ6に含まれる内容の要旨
Installation 1 It is dangerous to alter the specifications or attempt to modify this product in any way. 1 Care must be taken to ensure that the appliance does not stand on its electrical supply cable. 1 Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Technical Specifications Height 85 cm (33.5’’) DIMENSIONS Width 60 cm (23.6’’) Depth 60 cm (23.6’’) POWER SUPPLY VOLTAGE 230-240 V/50 Hz TOTAL POWER ADSORBED 1200 W (6 A
ページ7に含まれる内容の要旨
Unpacking Positioning It is recommended that, for your convenience, the machine Warning! is positioned close to your washing machine. The tumble dryer must be installed in a clean place, where 1 Slide out the polystyrene bag containing the polysty- dirt does not build up. rene block before using the appliance. Pull off adhe- To keep vibration and noise to a minimum when the dryer is sive strips from inside machine on top of drum. in use, it should be placed on a firm, level surface. Keep al
ページ8に含まれる内容の要旨
7.Unscrew cover plates E from the front of the machine, Door reversal rotate through 180, screw on the opposite side. 1 Warning! The door may only be reversed by a specialist. Instructions for qualified personnel/specialist Warning! Before reversing the door, disconnect the mains plug; with a permanent connection: remove the fuse. 1.Open door. 8.Unscrew door lock F, push down slightly and remove from the front of the machine. 9.Press snap-in button G in and down, press cover down slightly a
ページ9に含まれる内容の要旨
Electrical connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent per- 1 WARNING! son. A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. 1 WARNING – THIS APPLIANCE MUST BE Ensure that the cut off plug is disposed of safely. EARTHED. Should the appliance power supply cable need to be replaced, this must be carried out by a 1 The plug must still be accessible after the ap- Service Force agent
ページ10に含まれる内容の要旨
The control panel 7 9 8 12 11 10 6 12 3 4 5 1 Wool button 6 Maintenance display To select the Wool programme after setting the programme The related light comes up when selector to WOOL/SILK. If no button is pressed, the Wool the tank must be emptied or programme is automatically set. the filters must be cleaned. 2 Silk button 7 Programme selector To select the SILK programme after setting the programme The appliance will be switched on by turning the pro- selector to WOOL/SILK. gramme
ページ11に含まれる内容の要旨
Changing a programme 10 Delay start button To change a programme which has been selected by mistake By pressing the DELAY START button, the start of a pro- once the programme has started, first turn the programme gramme can be delayed by between 30 minutes (30') and a selector to OFF and then reset the programme. maximum of 23 hours (23h). The programme can no longer be changed directly once the This option must be selected after having selected the pro- programme has started. If nevertheless t
ページ12に含まれる内容の要旨
Programme Chart Automatic drying 1) Type of laundry Degree of drying required Max-load Extra dry 6kg Store dry 6kg Cupboard dry 6kg Cottons Damp dry 6kg Iron dry 6kg Extra damp 6kg Extra dry 3kg Synthetics Cupboard dry 3kg Iron dry 3kg Jeans Heavy cotton 6kg Easy care fabrics Easy iron 1kg Woolen fabrics Wool 1kg Silk Silk 1kg Synthetics Refresh 1kg 1) Never overfill the drum (do not load large quilts, for example) Easy iron is a special programme with anti-crease mecha- Silk is a special p
ページ13に含まれる内容の要旨
Using the tumble dryer Selecting additional functions 1 If the appliance was not transported in an upright po- sition, leave it to stand for 12 hours before connect- INTENSITY ing it to the electricity supply and using it for the first time, so that the oil can flow back to the compres- For precise setting of the residual moisture content of the sor. Otherwise the compressor could be damaged. laundry, the degrees of dryness +, ++ or +++ can be set in addition to most programmes. Laundry becomes
ページ14に含まれる内容の要旨
Setting time delay Drying cycle complete / remov- ing laundry 3 With the DELAY START button, you can delay the Once the drying cycle is complete, the END and CREASE start of a programme by between 30 minutes (30' GUARD indicators light up. If the ALARM button has been and a maximum of 23 hours (23h). pressed, an acoustic signal sounds intermittently. 1.Select the programme 2.Press the DELAY START button as many times as neces- 3 The drying cycles (except for the WOOL pro- sary until the requir
ページ15に含まれる内容の要旨
3 Hints & Tips on Drying Before placing articles of laundry in your tumble dryer, Always load well spun laundry. The higher the spin speed check the care labels to ensure they are recommended for the lower the electricity consumption and the shorter the tumble drying. drying time. DO NOT load dripping wet laundry into the dryer. Roll Care labels you may find on your laundry the article in a towel or spin to remove excess water. Close poppers and zips and fasten any buttons. may be tumble d
ページ16に含まれる内容の要旨
Maintenance and Cleaning You must disconnect the appliance from the elec- 5.Remove fluff from fine strainer. It is best to use a damp tricity supply, before you can carry out any cleaning hand for this purpose. or maintenance work. Clean the entire filter area External cleaning 3 The strainer area does not have to be cleaned after every drying cycle, but should be checked regularly Use only soap and water and then dry thoroughly. and cleaned of fluff if necessary. Important: Do not use methylat
ページ17に含まれる内容の要旨
the pressure points on the sides and pull the filter mat Cleaning the fluff filter and frame up and out of the housing. If the indicator PLINTH FILTER lights up, the fluff filter and the filter mat in the base of the appliance must be cleaned. 3 To protect the heat pump from dirt, the dryer is fit- ted with a special filter mat, which is located in the filter housing. Here too large amounts of fluff build up over time, which affect the function of the appli- ance. 1 Important Operating when
ページ18に含まれる内容の要旨
Emptying the water reservoir Cleaning the drum Empty water reservoir after every drying cycle. 1 Warning! Do not use abrasives or steel wool to If the water reservoir is full, an active programme will be in- clean the drum. terrupted automatically and the FULL TANK display will light up. In order to continue the programme, the water 3 Lime in the water or cleaning agents may form a reservoir must be emptied. barely visible lining on the inside of the drum. The degree to which the laundry has be
ページ19に含まれる内容の要旨
Programming options Objective Implementation 1.Turn the programme selector to any programme. Permanently programme on the audi- 2.Press the ALARM button and hold down for approx. 5 seconds. ble signal which reminds you that the A brief signal sounds several times. The ALARM display flashes several times. programme is complete. The setting is permanently programmed. The setting is cancelled as described under 1 and 2. 1.Turn the programme selector to any programme. 2.Press the SILK and ALARM bu
ページ20に含まれる内容の要旨
Something Not Working If the tumble dryer is not working correctly, please carry out the following checks before contacting your local Service Force Centre. If, during operation, the error code (E plus number or letter) appears on the multi-display: Switch the appliance off and on again. Reset programme. Press the START/PAUSE button. If the error is still displayed, please inform your local Service Force Centre and quote the error code. IMPORTANT: If you call an engineer to a fault listed below
