ページ1に含まれる内容の要旨
DVD/CD RECEIVER
DVD-/CD-RECEIVER
RÉCEPTEUR DVD/CD
DVD/CD-RECEIVER
KD-DV7402/KD-DV7401
For canceling the display demonstration, see page 7.
Zum Abbrechen der Displaydemonstration siehe Seite 7.
Pour annuler la démonstration des affichages, référez-vous à la page 7.
Zie bladzijde 7 voor het annuleren van de displaydemonstratie.
For installation and connections, refer to the separate manual.
Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.
Pour l’installation et les raccordem
ページ2に含まれる内容の要旨
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical
ページ3に含まれる内容の要旨
WARNINGS: How to reset your unit (To prevent accidents and damage) • DO NOT install any unit or wire any cable in a location where; – it may obstruct the steering wheel and gearshift lever operations. – it may obstruct the operation of safety devices such as air bags. – it may obstruct visibility. • Your preset adjustments will also be erased (except the • DO NOT operate the unit while driving. registered Bluetooth device, see pages 28 and 29). • If you need to operate the unit while
ページ4に含まれる内容の要旨
How to use the M MODE and SEL Detaching the control panel buttons If you use M MODE or SEL (select), the display and some controls (such as the number buttons, 4 /¢ buttons, 5/∞ buttons, and the control dial) enter the corresponding control mode. Ex.: When you press number button 1 after pressing M MODE, to operate the FM tuner. Avoid touching the connectors. Attaching the control panel To use these controls for original functions, press M MODE again. • However, pressing SEL makes the
ページ5に含まれる内容の要旨
CONTENTS INTRODUCTIONS Playable disc type ........................................................................................................................... 6 Preparation ..................................................................................................................................... 7 OPERATIONS Basic operations .............................................................................................................................. 8 • Using the control panel
ページ6に含まれる内容の要旨
Playable disc type Disc type Recording format, file type, etc Playable 1 DVD DVD Video (Region Code: 2) * DVD Audio DVD-ROM DVD Recordable/Rewritable DVD Video 2 3 (DVD-R/-RW * , +R/+RW * ) DVD-VR • DVD Video: UDF bridge DivX/MPEG1/MPEG2 • DVD-VR • DivX/MPEG-1/MPEG-2/MP3/ MP3/WMA/WAV WMA/WAV: ISO 9660 level 1, AAC level 2, Romeo, Joliet JPEG/MPEG4 DVD+VR DVD-RAM Dual Disc DVD side Non-DVD side 4 CD/VCD Audio CD/CD Text (CD-DA)/DTS-CD * VCD (Video CD) SVCD (Super Video CD) CD-ROM CD-I (CD-I Read
ページ7に含まれる内容の要旨
Preparation Cancel the display demonstration and set the clock • See also pages 45 and 46. Turn on the power. 1 Enter the PSM settings. 2 Cancel the display demonstrations 3 Select “Demo,” then “Off.” Set the clock Select “Clock Hr” (hour), then adjust the hour. Select “Clock Min” (minute), then adjust the minute. Select “24H/12H,” then “24Hours” or “12Hours.” Finish the procedure. 4 Changing the display information and pattern • When the power is turned off: Check the current clock time Ex
ページ8に含まれる内容の要旨
Basic operations Using the control panel 1 • DAB: Select DAB service. 9 • Volume control [Turn]. 1 • DISC/USB/CD-CH: Select title/program/ • Select the source [Press] * . 2 2 2 playlist/folder. TUNER = DAB * = DISC * = USB * (or 2 2 2 • USB-iPod: Enter the main menu [Hold]. USB-iPod) * = CD-CH * /iPod * (or EXT IN) 2 2 • iPod: Enter the main menu/Pause playback/ = BT-PHONE * = BT-AUDIO * = LINE IN Confirm selection. = AV IN = (back to the beginning) • BT-PHONE/BT-AUDIO: Select a registe
ページ9に含まれる内容の要旨
Using the remote controller (RM-RK252) Installing the battery R03/LR03/AAA Insert the batteries into the remote controller by matching the polarity (+ and –) correctly. Caution: Battery shall not be exposed to excessive heat such as sunshine, fire, or the like. If the effectiveness of the remote controller decreases, replace both batteries. Before using the remote controller: • Aim the remote controller directly at the remote sensor on the unit. • DO NOT expose the remote sensor to bright l
ページ10に含まれる内容の要旨
2 5/∞ buttons 3 VOL (volume) + / – buttons • TUNER/DAB: Selects the preset stations/ • Adjusts the volume level. services. 2nd VOL (volume) buttons • DISC: • Adjust the volume level through the 2nd AUDIO – DVD-Video: Selects the title. OUT plug when pressed with SHIFT button (see – DVD-VR: Selects the program/playlist. page 27). – DivX/MPEG Video/MP3/WMA/WAV: Selects the folders if included. 2 4 * ASPECT button • USB: • Not applicable for this unit. – DivX/MPEG Video/MP3/WMA/WAV: Se
ページ11に含まれる内容の要旨
e 3 (play) / 8 (pause) button DIRECT button • DISC/USB/USB-iPod/BT-AUDIO: Starts/ • DISC/USB: Enters direct search mode for pauses playback. chapter/title/program/playlist/folder/track when pressed with SHIFT button (see page 20 for details). r (end call) button • Ends the call. CLR (clear) button • DISC/USB: Erases the misentry when pressed BAND / 7 (stop) buttons with SHIFT button. • TUNER/DAB: Selects the bands. • DISC/USB/USB-iPod/BT-AUDIO: Stops playback. 1 * When Dual Zone is a
ページ12に含まれる内容の要旨
Listening to the radio Select “TUNER.” 1 Select the bands. 2 Search for a station to listen—Auto Search. 3 Manual Search: Hold either one of the buttons until “M” lights up on the display, then press it repeatedly. • When receiving an FM stereo broadcast with sufficient signal strength, lights up on the display. When an FM stereo broadcast is 2 hard to receive 1 3 2 Local FM stations with the strongest signals are searched and stored automatically in the selected Reception improves,
ページ13に含まれる内容の要旨
3 Listening to the preset station on the Preset Station List 1 Display the Preset Station List, then select Preset number flashes for a while. the preset station you want to listen to. Using the Preset Station list 2 Change to the selected station. • When is shown on the display, you can move back to the previous screen by pressing number button 3. 1 Follow steps 1 and 2 of “Using the number buttons” on page 12. • By holding 5 / ∞, the Preset Station List will also appear (go to step 4
ページ14に含まれる内容の要旨
3 Select a PTY code. 4 Select one of the PTY codes. You can select a PTY code from the 29 preset PTY codes or from the six stored PTY codes. 5 Store the selected PTY code. • To store your favorite programme types, see the following. 4 Start searching for your favorite programme. Ex.: When “Classics” is selected in step 4 If there is a station broadcasting a programme 6 Repeat steps 3 to 5 to store other PTY codes of the same PTY code as you have selected, that into other preset numbers.
ページ15に含まれる内容の要旨
PTY Standby Reception Tracing the same programme— Network-Tracking Reception 1 When driving in an area where FM reception is not sufficient enough, this unit automatically tunes in to another FM RDS station of the same network, possibly 2 broadcasting the same programme with stronger signals (see the illustration below). Programme A broadcasting on different frequency 3 Select a PTY code. areas (01 – 05) 4 Exit from the setting. either lights up or flashes on the display. When shipped f
ページ16に含まれる内容の要旨
Disc operations Before performing any operations... Turn on the monitor to watch the playback picture. If you turn on the monitor, you can also control playback of other discs by referring to the monitor screen. (See pages 22 – 25.) The disc type is automatically detected, and playback starts automatically (for DVD: automatic start depends on its internal program). If the current disc does not have any disc menu, all tracks will be played repeatedly until you change the source or eject the di
ページ17に含まれる内容の要旨
Operations using the control panel Pressing (or holding) the following buttons allows you to... Disc type 3 (Number buttons) * [Press] Select chapter Select title During stop: Locate title [Hold] Reverse/fast-forward During play/pause: Locate 1 chapter * chapter [Press] Select chapter Select program number/ During stop: Locate program [Hold] Reverse/fast-forward playlist number During play/pause: Locate 1 chapter * chapter [Press] Select track Select folder Locate particular folder directly
ページ18に含まれる内容の要旨
After pressing M MODE, press the following buttons to... Disc type Skip 10 chapters (during Repeat Chapter: play or pause) Repeat current chapter — Repeat Title: Repeat current title Skip 10 chapters (during Repeat Chapter: play or pause) Repeat current chapter Repeat Program: — Repeat current program (not available for Playlist Playback) Skip 10 tracks (within the Repeat Track: Random Folder: same folder) Repeat current track Randomly play all tracks of Repeat Folder: current folder, then t
ページ19に含まれる内容の要旨
Selecting a folder/track on the list 5 Change to the selected item. A If File List is selected (only for MP3/WMA/WAV file) The list disappears and playback • When is shown on the display, you can starts. move back to the previous screen by pressing number button 3. 1 B If Folder List is selected 2 Select “LIST.” • If the current folder is selected, File List appears, then repeat steps 4 and 5 A to start playback. 3 Select the list type. • If another folder is selected, playback starts
ページ20に含まれる内容の要旨
Operations using the remote controller (RM-RK252) Disc / Button Stop play Stop play Start play/Pause (if pressed during play) Start play/Pause (if pressed during play) 1 4 • Reverse/forward chapter search * (No Reverse/forward track search * (No sound can sound can be heard.) be heard.) 2 • Slow motion * during pause (No sound can be heard.) * DVD-VR: Reverse slow motion does not work. [Press] Select chapter (during play or pause) [Press] Select track (during play or pause) 3 5 [Hold] Rev
