ページ1に含まれる内容の要旨
Name of Parts
Program selector
Condenser Tumble Dryer Container handle
HDY-D70-E
Door
Table of Contents
Before using the dryer
Name of Parts....................................1
Plinth
Important Safety Instructions .....2-3
Installation.....................................4-6
Preparation ......................................7
Earth terminal
Back plate
How to operate the dryer
Power supply cable
Control panel.................................8-9
Programming guide.........................10
Ba
ページ2に含まれる内容の要旨
Important Safety Instructions Important Safety Instructions 17.If the supply cord is damaged,it must be replaced by the manufacturer ,its service agent To reduce the risk of fire, electrical shock, or injury to or similarly qualified persons in order to avoid a hazard. persons when using this dryer, follow basic precautions,including the following: 18.Do not operate the dryer if any parts are missing or broken. 1.Read all instructions before using this dryer. 19.Do not store or use
ページ3に含まれる内容の要旨
Installtion Installtion b Dimensions Change the door-opening direction a = 855 mm If the direction of the dryer's door is not suitable to the location, its opening direction b = 620 mm may be changed. The procedure is as follows: c = 595 mm 1. Unscrew the 4 hinge screws holding the door onto the machine and remove Weight = 43 kg the door. 2. Unscrew the door catch 6 and prise out the catch cover on the opposite side of the door and transpose them. c 3. Unscrew the door hinges and
ページ4に含まれる内容の要旨
Preparation Installtion Drain switchover Attention ■ Before use, clean any deposits from inside the drum of the dryer with During the drying of the laundry, the condensate water is automatically a wet towel; collected in the box inside the machine, so that the water needs to ■ Clean debris on the filter screen to increase the drying efficiency. be removed from the box after every drying cycle. If your dryer is in the vicinity of a drain, you may allow the condensed Turning on power water
ページ5に含まれる内容の要旨
Control Panel Control Panel G H G - Programme progress display Depending on the programme selected, the drying stage reached is shown by the indicator lamps on the control panel: - Drying - Ready to iron - Airing - End/Anti-crease F E D C B A J At the end of a programme,the End/Anti-crease indicator lamp comes on. The drum will continue to rotate at intervals
ページ6に含まれる内容の要旨
Programming Guide Drying Methods Type of Laundry 1.Turning on power Program Max. load Degree of drying Insert the power plug into an appropriate wall socket and turn on the power. . Operating power supply: (220-240)V/50Hz. Heavy cotton fabrics, sheets, Extra dry 7 kg * 2. Laundry loading Reference weight of fabrics for drying gowns. Open the door and place the ● ● Jeans(appr 800g) Overalls laundry into the drum of the dryer . Ready to wear 7 kg Cotton fabrics, sheets, coats (co
ページ7に含まれる内容の要旨
Cleaning and Maintenance Cleaning and Maintenance 1 .Cleaning the surface -Using a coin or other tool, push the slides on the cover to the position Wipe the body of the dryer and the control panel with a damp cloth. as shown in the figure and then remove the cover; Remember not use any organic solvent or corrosive agent to avoid -Turn the condenser's handle 90 degrees in the direction as shown in damage to the machine. the figure; -Remove the condenser from the dryer; 2. Cleaning the fi
ページ8に含まれる内容の要旨
Trouble Shooting Trouble Shooting Prompt and Alarm Information The following must be confirmed before calling for service: In case of an improper operation or trouble with the machine when it operates, the code corresponding to the trouble will be displayed on the screen: Problem Possible Cause Cause Code Category Solutions ● Is the power supply plugged in and switched on. ● Plug another appliance into the wall socket to There is no chan
ページ9に含まれる内容の要旨
Wiring Circuit Specifications T Type LHDY-D70-E Item Item (220-240)V/50Hz Power supply K1 K1 NTC NTC K3 K3 K3 K3 K2 K2 H H N N F FA A G G Maximum operating current(A) 12 L L Rated load(kg) 7 Drying program 11 P PC CB B1 1 P PC CB B2 2 Maximum power(W) 2800 Dimensions(H×D×W)mm 855 × ×620 × ×595 R1 R1 R2 R2 P P L M M S S T1 T1 T2 T2 F FA A- -E Elle ec cttr ro om ma ag gn ne ettiic c i in ntte er rffe er re en nc ce e i in nh hiib biitto or r R R1 1 － －H He ea attiin ng g1 1 R R2 2 － －H He ea att
