ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
15 Do not dry unwashed items in the tumble dryer. 16 Fabric softeners, or similar products, should be used as specified by the fabric softener instructions. 17 To prevent fire, do not use heat to dry items containing plastic, foam rubber or similarly textured rubber-like materials, or items containing feathers or down. Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber backed articles and clothes or pillows fitted with foam rubber pads should not be
ページ4に含まれる内容の要旨
ページ5に含まれる内容の要旨
ページ6に含まれる内容の要旨
1. Power up Insert the power plug into an appropriate power outlet that is properly installed and grounded. Operating power supply: 220-240V~50Hz. 2. Laundry loading Open the door and load the laundry into the drum of the dryer. For a more energy efficient and better drying result, make sure the load has been spun dry. Try to loosen the load when placing in the dryer. Note: Check labels on clothing before placing them in the dryer. Some articles are not suitable for mac
ページ7に含まれる内容の要旨
ページ8に含まれる内容の要旨
WARNING! Unplug the power cord prior to any cleaning Cleaning the surface Wipe off any dust or dirt. Note: Do not use excessive water, . a damp cloth is fine. Do not use solvent. Do not use spray cleaners when cleaning the interior. Do not use harsh or abrasive cleaners. Cleaning the filter screen To ensure good ventilation during drying, the filter screen must be cleaned before or after each use. 1. Remove the filter Gently pull out the filter screen towards you
ページ9に含まれる内容の要旨
INSTALLATION INSTRUCTIONS Unpacking your dryer Dimensions a=830 mm b=600 mm c=560 mm Weight=30 kg Remove the transport packaging (fig.1) Remove the tape on the door (fig.2), the wall mounting kit and the inverted panel film attached to the inside of the drum (fig.3) before starting the dryer. fig.1 fig.2 fig.3 Packing accessories Check list of the accessories and materials provided with the machine: Name Quantity User manual 1 Wall mounting kit
ページ10に含まれる内容の要旨
ページ11に含まれる内容の要旨
ページ12に含まれる内容の要旨
INSTALLATION INSTRUCTIONS 5. With assistance, mount dryer on wall brackets. See Fig.4. Fig.4 6. A second control panel with inverted symbols is supplied. Peel the release paper from the back of inverted film then place new control panel film on the surface so that the writing is the correct way around. 60min Start/Pause 100min 30min Normal 60min Heat Dry Air Dry 6kg Sensor Dryer Extra Dry 30min HDY-D60 Caution Plug must be accessble after installation. Stacking installation You can us
ページ13に含まれる内容の要旨
INSTALLATION INSTRUCTIONS 2. Install the dryer with stacking kit on the top of the front load washing machine (Fig.3). Drill two holes on both sides of washer with 2.9mm diameter drill. Detailed drill postion as shown on the stacking kit. Make sure the included screws are used. Fix the stacking kit on the top cover of washing machine, as shown on Fig.4. Dryer Stacking kit Washer Fig.3 Fig.4 Change the venting mode There are three venting options: Front venting The exhaust grill h
ページ14に含まれる内容の要旨
INSTALLATION INSTRUCTIONS Rear venting If you want to choose the rear venting mode, the exhaust grill at the front of the dryer needs to be replaced with the outlet cover from the back panel of the dryer. Gently open the grill, using a thin tool such as a key. Next, remove the cover from the back panel and clip it into the grill space at the front panel. The exhaust grill is not required when using a flexible hose. Off 30min Extra Dry HDY-D60 Air Dry Heat Dry 60min Normal 6kg Sensor Dryer 3
ページ15に含まれる内容の要旨
ページ16に含まれる内容の要旨
TYPE HDY-D60 ITEM 220-240)V~ · 50Hz Power supply 10 Maximum operating current (A) Rated load (kg) 6 Drying program 7 Maximum power (W) 2100 830x560x600 Dimensions (HxDxW) mm 30 Weight (kg) IPX4 Waterproof degree 15
