Harman-Kardon CDR 26の取扱説明書

ページ1に含まれる内容の要旨

®
®
Power for the Digital Revolution.
How to Make Recordings Using the
HarmanKardon CDR 26
There are 5 ways you can make recordings using the CDR 26
CD Recorder
1. Dub an exact copy of an entire CD or a single track using just the two decks of the CDR 26.
2. Dub part or all of a CD, MiniDisc or other compatible external digital source from another machine into the CDR 26
using CD Sync.
3. Dub a compilation or mix of one or more CDs using the two decks of the CDR 26.
4. Make a recording from

ページ2に含まれる内容の要旨

2. Dub part or all of a CD, MiniDisc or other compatible external digital source from another machine into the CDR 26 using CD Sync Step 1: The CD Sync function will only work with compatible digital input sources such as CD or MiniDisc players that send proper track data and sync-clock information. To record from an analog source, see Section 4. To record from a digital source without using the CD Sync feature, see Section 5. Select the digital input by pressing the Input button until the des

ページ3に含まれる内容の要旨

® ® Power for the Digital Revolution. Power for ™ the digital revolution. 4. Make a recording from an external analog source, such as a radio, a turntable or a cassette deck Step 1: Insert a blank disc into the Record deck (right drawer). Step 2: Press the Input Selector button until Analog appears in the display. Step 3: Press the Record button so that the Record indicator flashes in the display. Step 4: Make sure you can hear the source through your receiver. Cue it up to the start point. Step

ページ4に含まれる内容の要旨

In Auto mode, when the CDR 26 does not receive track information from the source, it will automatically increase the track number after three seconds of silence, and it will stop the recording after five seconds of silence. Depending on the amount of time between the tracks on the original recording, this may result in empty tracks. To avoid this, press the Auto/Manual button on the remote to place the CDR 26 in Manual mode. Step 6: Press the Play/Select button on the Record deck side to start r