ページ1に含まれる内容の要旨
Vented
Time Dryer
DRVT 61 W
ページ2に含まれる内容の要旨
Read this manual prior to initial operation of the product! Dear Customer, We hope that your product, which has been manufactured in modern facilities and passed through a strict quality control procedure, will give you very good results. We advise you to read through this manual carefully before using your product and keep it for future reference. This User Manual will • Help you use your machine in a fast and safe way. • Read the User Manual before installing and starting your product. • In
ページ3に含まれる内容の要旨
TABLE OF CONTENTS Programme selection and 1 Your Dryer 4 consumption table ....................... 15 Overview ....................................... 4 Auxiliary function .......................... 16 Warning indicators ....................... 16 2 Important safety information 6 Starting the Programme .............. 16 General safety ............................... 6 Timer follow-up indicator ............. 16 Intended use ................................. 7 Changing the programme after th
ページ4に含まれる内容の要旨
1 Your Dryer Overview 5 1 2 3 4 1- Rating label 4- Adjustable Feet 2- Control Panel 5- Power Cord 3- Fluff filter 4 EN
ページ5に含まれる内容の要旨
Technical Specifications EN 2 Height (adjustable) 85.0 cm Width 59.5 cm Depth 54 cm Capacity (max.) 6 kg Weight (net) 31 kg Voltage Rated power input See rating label Model code Type label is located behind the loading door. Specifications of this appliance may change without notice to improve the quality of the product. Figures in this manual are schematic and may not match your product exactly. Values stated on the machine labels or in the documentation accompanying it are obtained in labor
ページ6に含まれる内容の要旨
2 Important safety information TThis section includes safety information that will help protection from risks of to power supply in order to decrease personal injuries or materialistic damages. the risk of electric shock. Failure to follow these instructions • Do not make any changes on the plug shall cause any warranty and reliability supplied with the product. If it is not commitment to become void. compatible with the socket, have a General safety qualified electrician change the so
ページ7に含まれる内容の要旨
in places where it will be exposed to • Fabric softeners or similar products outdoor conditions. should be used as specified by the • Do not tamper with the controls. fabric softener instructions. • Do not perform any repair or part • Underwear that contains metal replacing procedures on the product reinforcements should not be placed in even if you know or have the ability to a dryer. Damage to the dryer can result perform unless it is clearly suggested if metal reinforcements come loose
ページ8に含まれる内容の要旨
3 Installation Refer to the nearest Authorised Service Ventilation hose and Agent for installation of your product. connection (for products C Preparation of location and electrical equipped with an outlet vent) installation for the product is under Ventilation hose assures exhausting of the customer’s responsibility. air from inside the machine. B Installation and electrical connections Vented dryer has 1 air outlet. must be carried out by a qualified Stainless sheet metal or aluminum
ページ9に含まれる内容の要旨
2. Fit the plastic parts on to the front adjustable feet. Press on the plastic parts to snap them into their seating. 3. Check the balance of your product again and readjust the adjustable feet if necessary. First use • To have the product ready for operation before calling the authorised service agent, make sure that its location and power supply installations are appropriate. If they are not, call a qualified electrician to have any B The air ventilation hose should not be necess
ページ10に含まれる内容の要旨
4 Electrical Connection Built-under installation Make sure that you have an earthed This appliance can be installed under a power outlet socket rated at 13 amps worktop. (minimum). A Undercounter installation without the Attention! top cover must only be carried out by an If you use your dryer as built-in, authorised agent.Risk of electric shock. the socket must be reachable after A Important installation, or a separate switch (which can disconnect the two poles) must Fitting a di
ページ11に含まれる内容の要旨
3 Initial preparations for drying Things to be done for energy saving: • Make sure that you operate the product A B C D at its full capacity but pay attention to Low not exceeding it. • Spin your laundry at the highest speed possible when washing them. Thus, the drying time is shortened and energy consumption is decreased. l n m • Pay attention to dry same types of laundry together. • Follow the instructions in the user manual for programme selection. • Make sure that sufficient clearan
ページ12に含まれる内容の要旨
emit flammable or explosive vapor. A Consider the information in the • Do not dry items cleaned with "Programme Selection Table". Always industrial chemicals in the dryer. start the programme in accordance • Do not dry your unwashed laundry in with the maximum load capacity. the dryer. C Adding laundry to the machine more • Items soiled with cooking oils, than the level shown in the figure is not acetone, alcohol, fuel oil, kerosene, recommended. Drying performance stain remover, turpentin
ページ13に含まれる内容の要旨
6 Selecting a Programme and Operating Your Machine Control panel 1 2 3 4 6 5 1. Filter cleaning warning light 4. On/Off button Warning light turns on when the filter is Use to turn on and off the machine. full. 5. Programme selection knob 2. Programme follow-up indicator Use to select a programme. Use to follow-up the progress of the 6. Start/Pause/Cancel button current programme. Use to start, pause or cancel the 3. Low temperature programme. Use to dry in low temperatures. 13 EN
ページ14に含まれる内容の要旨
Preparing the machine 1. Plug in your machine. 2. Place the laundry in the machine. 3. Press the “On/Off” button. C Pressing the “On/Off” button does not necessarily mean that the programme has started. Press “Start/Pause/ Cancel” button of the machine to start the programme. Main programmes •Anti-creasing A 2-hour anti creasing programme to prevent laundry from creasing will be activated if you do not take the laundry out after the programme has come to an end. This programme rotates t
ページ15に含まれる内容の要旨
Programme selection and consumption table Programmes table Capacity Spin speed in washing Drying time Programmes ((kg (machine (rpm ((minutes Cottons / Coloureds 1200-1000 110 6 900-800 130 Ready to Wear A 1200-1000 80-60 3 900-800 110-80 1200-1000 110-80 6 900-800 110 A Ready to Iron 1200-1000 60-40 3 900-800 80-60 Synthetics 800 60-40 3 600 80-60 Ready to Wear B 800 40-20 1.5 600 60-40 Delicates Ready to Wear 1.5 800 40 B Energy consumption values Approximate Energy Capacity Spin spe
ページ16に含まれる内容の要旨
the ongoing programme in order to Auxiliary function Low temperature change the drying programme. (See, This function allows for drying at lower Ending the program through canceling) temperatures and therefore saves energy. Adding/removing laundry in standby Warning LED will light up when you select mode In order to add or take out laundry after the function. the start-up of the programme C You must use this function when you 1. Press the “Start/Pause/Cancel” button dry your synthetic or
ページ17に含まれる内容の要旨
To start a new programme after the programme is over or to interrupt the programme, the childproof lock should be deactivated. To deactivate the childproof lock, press the same buttons for 3 sec. C One of the LEDs on the program follow-up indicator starts flashing when the child-proof lock is activated. C Child-proof lock is deactivated when the machine is restarted by pressing the On/Off button. Ending the programme through cancelling The program which is selected first will keep on
ページ18に含まれる内容の要旨
7 Quick instructions for daily use Preparation and starting Changing the programme after the 1. Press the “On/Off” button. programme has started 2. Place the laundry in the machine. You can use this feature after your 3. Select the programme. machine has started to dry your clothes 4. Close the loading door. under higher or lower temperatures. 5. Press “Start/Pause/Cancel” button. Press and hold the “Start/Pause/Cancel” button for about 3 seconds to switch Cancelling a programme the m
ページ19に含まれる内容の要旨
8 Maintenance and cleaning Fluff filter Lint and fibres released from the laundry to the air during the drying cycle are collected in the “Fluff Filter”. C Such fibre and lint are generally formed during wearing and washing. C Always clean the filter after each Drying process. C You can clean the filter and filter area by vacuum cleaner. For Filter cleaning; 1. Open the cover 2. Remove the fluff filter by pulling it up and open the filter. 3. Clean lint, fibre, and the fluff by hand
ページ20に含まれる内容の要旨
9 Solution suggestions for problems Problem Cause Explanation / Suggestion Drying process The filter might have not been * Meshes of the filter may be clogged. takes too much cleaned. Wash with water. time. * The filter might have not been Laundry comes * Meshes of the filter may be clogged. cleaned. out wet at the end Wash with water. * Excessive laundry might have been of drying. * Do not overload the machine. loaded in. * It might have not been plugged in. * The loading door may be aj
