ページ1に含まれる内容の要旨
INSTRUCTION MANUAL
MANUAL DE INSTRUCCIONES
Model Number/ No. de Modelo: WDB101
CLOTHES DRYER STACKING BRACKET
CAUTION:
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING
INSTRUCTIONS.
Avanti has a policy of continuous improvement on its products and reserves the right to change materials and
specifications without notice.
Avanti Products
P.O. Box 520604 - Miami, Florida 33152
www.avantiproducts.com
1
ページ2に含まれる内容の要旨
Before beginning to assemble this product, review and ensure that you have received all of the parts as listed / shown below: Components Included Part Code: Description Quantity A Bottom Support Frame 1 B Middle Support Frame 1 C Top Shelf 1 D Rear Leg (Bottom section) 2 E Front / Rear Leg (Top section) 4 F Front Leg (Bottom section) 2 G Anti‐Tip Safety Bracket (Part 1 of 2) 2 H Anti‐Tip Safety Bracket (Part 2 of 2) 2 I Shelf / Frame Support Clips 30** J Spa
ページ3に含まれる内容の要旨
Assembled Dimensions 3
ページ4に含まれる内容の要旨
Your Washer / Dryer Stacking Bracket is designed to accommodate both top loading or front loading washing machines. Follow the assembly instructions below to assemble the bracket to fit your specific washing machine type. Images shown in this instruction guide are for assembly for use with a TOP‐Load washer. Step 1: Assembling the legs: When using with a TOP‐ Load washer. Assemble the rear legs by screwing together all three sections of the rear leg. Part D – Rear Leg (Bottom sec
ページ5に含まれる内容の要旨
Step 3: Assembling the Middle Support Frame and Logo / Support Bar. The Middle support frame (Part B) MUST be installed to maintain the stacking bracket square and stable. a) Using the Shelf / Frame support clips (Part I) insert the plastic tapered clips into the appropriate grooves on each leg. (See the image). b) Align the corner holes of the Middle support frame (Part B) with each of the legs and gently lower onto the support clips. Press each corner downward firmly to ens
ページ6に含まれる内容の要旨
Step 5: Installing the Anti‐Tip Safety Bracket: a) Attach the Anti‐Tip Safety Bracket (Parts G and H) to the Stacking bracket as shown. By joining the two (2) parts using the Phillips Head Screw and Nut (Parts K and N). b) Align the assembled Stacking bracket in place and mark where the Anti‐Tip Safety Bracket is to be attached to the wall. c) Using the Wall Anchors and Self Tapping Phillips head screws (Parts L and M) included to attach the assembled Stacking bracket to t
