ページ1に含まれる内容の要旨
SEBO ET-H Power Head
For Household Use Only
©Copyright SEBO America, LLC • All rights reserved.
ENGLISH
ページ2に含まれる内容の要旨
SEBO ET-H Power Head Owner’s Manual Table of Contents Technical Details 2 Important Safety Instructions 3 Special SEBO Product Features 4 Identification of Parts 5 Attaching the Power Head to the Telescopic Tube 5 Operating Instructions 6 Starting the Machine 6 Operating the Machine 6 The Brush Pressure Adjustment Feature 7 Indicator Lights 7 Maintenance 8 Changing the Brush Rollers 8 Cleaning the Brush Rollers 8 Clog Removal 8 Clogs in the Airflow Pathway 8 Clogs in the Swivel Neck 8 Trouble-S
ページ3に含まれる内容の要旨
! IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE SAVE THESE INSTRUCTIONS. WARNING: To reduce the risk of fire, electric shock, or injury: 1. Do not leave vacuum while plugged in. Unplug from 20. Machines can cause a fire when operated near flammable outlet when not in use and before servicing. vapors or materials. Do not operate this vacuum near flammable fluids, dust or vapors. 2. Do not use outdoors or on wet surfaces. 21.Maintenance and repairs must be done by
ページ4に含まれる内容の要旨
SPECIAL SEBO PRODUCT FEATURES Your SEBO ET-H Power Head is designed specifically for use with the SEBO C3.1 and K3 canister vacuum cleaners. These vacuums are among the most technically advanced canister vacuum cleaners in the world. For example, the ET-H Power Head has warning systems and automatic shut-off capabilities that are designed to alert the user to machine problems that, if ignored, will damage the machine or diminish per- formance. Your SEBO ET-H Power Head’s most unique features are
ページ5に含まれる内容の要旨
Identification of Parts 4 7 2 6a 1. Power head 3 2. Brush pressure adjustment 3. Swivel neck 4. Connection plug 5. Indicator lights 5 6. Brush roller end cap 6a. Edge-cleaning brush roller end cap 1 7. Telescopic Tube release button 6 Attaching the Power Head to the Telescopic Tube of your SEBO C3.1 or K3 Vacuum 1. Find the connection tab (A) at the base of the telescopic tube (B). 2. Move the connection tab (A) OUT away from the tube (C). See enlarged detail below. It will only move approxima
ページ6に含まれる内容の要旨
Operating Instructions Starting The Machine - Figures 1 & 2 A. Before turning on your canister, make sure that the vacuum han- dle is in its upright locked position (figure 1). 1. With the canister main power switch in the OFF position, and the power control slider on the handle (#8, figure 2) in the OFF position, pull the power cord out from the base of the canister (see canister owner’s manual). The power cord should be unwound from the cable reel at least two thirds of its length. 2. Plug
ページ7に含まれる内容の要旨
The Brush Pressure Adjustment Feature - 2 8 Figure 4 The brushing pressure that your ET-H power head applies to your carpet is adjustable from SOFT through HARD. When the brush is set on SOFT, the brush pressure is decreased for a lighter brushing action. For thorough, deep brushing, set the pressure adjustment to HARD. The brush pressure adjustment dial is located on the top side of the power head (# 2, figure 4). To adjust the dial to SOFT, spin the dial in the direction of the arrow (#8, figu
ページ8に含まれる内容の要旨
6 Maintenance 9 10 9a Always unplug vacuum from outlet ! before dismantling any part of machine! Changing the Brush Rollers - Figures 6 & 7 To change the brush roller (#9, figure 6) or the edge-cleaning brush roller (#9a, figure 6), release the end caps (6 and 6a, fig- ure 6) by pushing the button (#10 for the brush roller, #10a for 6a 10a the edge-cleaning brush). Rotate the end caps in the direction of the arrows and pull them off. Turn the 8” brush roller clockwise and the edge-cleaning roll
ページ9に含まれる内容の要旨
Trouble-Shooting Guide Always unplug vacuum from outlet before dismantling any part of the machine! ! PROBLEM REASON SOLUTION Does not turn on 1. Telescopic tube not inserted properly. 1. See page 5. 2. Not plugged into good outlet. 2. Use another outlet. 3. Cable worn. 3. Replace cable. 4. The power control slider switch is 4. Slide the power control slider set to “0” (“off” position). switch to “on” position. Green and amber lights 1. Jammed brush roller. 1. Remove brush roller obstruction. S
ページ10に含まれる内容の要旨
SEBO ET-H Power Head Schematic and Parts List Pos. Part # Description Pos. Part # Description 1 2701 DG Chassis 18 2751 DG Bearing block right hand 2 2708 Sealing strip 20 2752 DG Brush cover, cpl. 3 2729 UL Internal cable 21 2770 UL Swivel neck assembly 4 2707 Wire tie 22 1737 DG Release button 5 2704 DG Rear bottom plate, cpl. 1739 Leaf spring 6 2730 Brush motor 120 V 150 W 23 2775 DG Cap 7 2733 Motor pulley 24 2771 HG Swivel neck support r.h. 8 2735 Motor support 25 2772 HG Swivel neck suppor
ページ11に含まれる内容の要旨
SEBO duo-P Cleaning System Deep clean your carpet with the SEBO duo Brush Machine and SEBO duo-P Powder The SEBO duo Carpet Cleaning System is formulated to deep clean your entire carpet or spot clean stubborn stains without soaking your carpet. Dry cleaning is safer for most carpets – it will not shrink the carpet or cause water staining if applied unevenly. SEBO duo-P Cleaning Powder leaves no deter- gent residue to cause your carpet to resoil, and the carpet can be used immediately after clea
ページ12に含まれる内容の要旨
SEBO Vacuum Cleaner Warranty Three Years Non-Wear Parts - One Year Labor 1. Your authorized SEBO dealer or SEBO will provide 7. The Wear Parts excluded from warranty coverage the original product purchaser with replacement of include the brush rollers, the front bottom plate and Non-Wear Parts which fail due to a material or work- the rear bottom plate. manship defect for a period of three (3) years from the original date of purchase of new product. 8. This warranty applies only while your SEB
