ページ1に含まれる内容の要旨
WATER RESISTANT
PERSONAL CD-R/RW PLAYER
with 45 SECOND ANTI-SKIP PROTECTION
OWNER’S MANUAL
HD7003
Visit our web site at www.emersonradio.com
HD7003_ib040703.p65 20 7/4/2003, 10:49
ページ2に含まれる内容の要旨
Thank you for purchasing this Emerson Water-Resistant Personal CD-R/ RW Player. The CD-R/RW player has a 20 track programmable memory so you can listen to the songs on your favorite CD's in any order you choose. Or you can use the Shuffle playback feature and let the player select the playback order for you. Use the 3-way Repeat feature to repeat a single track, the entire disc, or a programmed sequence of tracks indefinitely. We've also included 45 second Electronic Anti-Skip Protection which m
ページ3に含まれる内容の要旨
IMPORTANT NOTES WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. Avoid installing the unit in locations described below: • Places exposed to direct sunlight or • Dusty places. close to heat radiating appliances such • Places subject to constant as electric heaters. vibration. • Humid or moist places. CLASS 1 LASER PRODUCT CAUTION CLASS 1 LASER PRODUCT INVISIBLE LASER RADIATION APPAREIL Á LASER DE CLASSE 1 WHEN OPEN AND INTERLOCKS PRODUCTO LASER DE CLASE 1 DE
ページ4に含まれる内容の要旨
PREPARATION FOR USE POWER SOURCES This personal CD player is designed to operate on two alkaline “AA” batteries, or on an optional AC adapter, not included. Attempting to operate this unit on any other power source may cause damage to the unit and such damage is not covered by your warranty. INSTALLING THE BATTERIES The battery compartment is located inside the CD player. 1.) Open the CD door locking hinge as shown and then open the CD door. Remove the “dummy CD” transit protection card from the
ページ5に含まれる内容の要旨
3.) Insert two fresh “AA” alkaline batteries in the battery compartment. Be sure to follow the polarity makings in the battery compartment. If the batteries are inserted incorrectly the unit will not work. 4.) Close the battery compartment cover and make sure that it is locked in place so that it does not come in contact with a CD. WHEN TO CHANGE THE BATTERIES When the Battery Indicator flashes in the display the batteries are getting weak and should be changed as soon as possible. Do not leave
ページ6に含まれる内容の要旨
You may also purchase a “Universal” type AC adapter that allows you to select the desired output voltage, and normally includes several of the most popular plug sizes. Make sure that the adapter you purchase is “UL Listed”. Look for the “UL” mark on the packaging and on the adapter itself. Connect the adapter housing directly to a 120V AC outlet. Connect the appropriate adapter plug to the “DC Input 4.5V” jack on the side of the CD player. Remove the rubber cap from the Input jack before connect
ページ7に含まれる内容の要旨
HAND STRAP INSTALLATION This player is supplied with an accessory hand-strap to secure the player in your hand while you are jogging or performing other strenuous activities. To install the hand-strap, thread the strap through the two slots in the hand strap ® bracket as shown, and then through the buckle. Adjust the Velcro strap to fit comfortably but securely around your hand. 6 HD7003_ib040703.p65 6 7/4/2003, 11:15
ページ8に含まれる内容の要旨
P I K S . F E S LOCATION OF CONTROLS AND INDICATORS 11 12 13 5 6 7 8 4 9 3 2 15 10 1 PORTABLE CD PLAYER 14 TOP CABINET LEFT SIDE CABINET 1.) CD Door Locking Hinge. 11.) DC IN 4.5V Jack. 2.) ASP (Anti Skip) Button. 12.) HOLD On/Off Switch. 3.) P-MODE Button. 13.) VOLUME Control. 4.) PROG (Program) Button. RIGHT SIDE CABINET 5.) LCD Display. 14.) PHONES Jack. 6.) PLAY/PAUSE Button. BOTTOM CABINET 15.) Hand-strap Bracket. 7.) F.SKIP Button. 8.) R.SKIP Button. 9.) STOP Button.
ページ9に含まれる内容の要旨
MULTIFUNCTION LCD DISPLAY 5 6 4 7 BASS 1 2 ONE ALL HOLD 8 PROG 3 ANTI- SHOCK SHUFF 2 INTRO 1 11 10 9 1.) INTRO – Intro Playback Indicator. 2.) SHUFF – Shuffle/Random Playback Indicator. 3.) PROG – Programmed Playback Indicator. 4.) BASS 1 / 2 – Bass Boost Level Indicator. 5.) “ ONE” – One Track Repeat Indicator.. 6.) “ ALL” – All Tracks Repeat Indicator.. 7.) HOLD Indicator. 8.) Anti Skip Protection (ASP) Level Indicator. 9.) Battery Status Indicator. 10.) Elapsed Time Display
ページ10に含まれる内容の要旨
OPERATING INSTRUCTIONS • Make sure the batteries are installed correctly, or that the optional AC adapter (not included) is installed properly. • If you have not already done so remove the “dummy CD” transit protection from the CD spindle and discard it. • Set the VOLUME control to a low level. • Fully unwind the headphone cord and connect the headphone plug to the headphone jack. The plug must be fully inserted into the jack, otherwise the sound may be intermittent. • Make sure that t
ページ11に含まれる内容の要旨
PLAYING COMPACT DISCS IMPORTANT: This CD player can play normal CDs plus CD Recordable (CD-R) and CD Rewriteable (CD-RW) discs. However the playability of CD-R and CD-RW discs may be affected by the type of software that was used in ‘ ripping’ the tracks from the original discs and ‘ burning’ the tracks onto the blank media. Playability may also be affected by the quality and condition of the blank media you use for recording. 100% compatibility cannot be guaranteed. This is not an indication of
ページ12に含まれる内容の要旨
5.) Put on the lightweight stereo headphones and adjust the VOLUME and BASS BOOST controls as desired. 6.) Playback will continue to the end of the disc. As each track is played the display will show the track number and the elapsed playing time of that track. After the last track has played the player stops and the display again shows the total tracks and total playing time on the disc. After several seconds the power shuts off automatically to conserve battery life and the display goes blank.
ページ13に含まれる内容の要旨
P I K S . F E S HOLD Switch The HOLD switch locks all of the other controls buttons. If you are carrying the CD player in a backpack, handbag, gym bag, etc, set the HOLD switch to the ‘On’ position to prevent it from starting accidentally by something pressing against the PLAY/PAUSE button. Likewise, once you start CD playback you can set the HOLD switch to the ‘On’ position to prevent you from accidentally pressing the STOP button or the SKIP/Search / buttons while you are carrying or jogging
ページ14に含まれる内容の要旨
P I K S . F E S SPECIAL PLAYBACK MODES Repeat Playback Either a single track or the entire disc can be repeated continuously. • 1 Track Repeat Begin playback as usual, then press the or buttons to select the desired track. When the desired track is playing press the P-MODE button once. The Repeat Indicator “ ONE” appears in the ONE ANTI- SHOCK display. The selected track will be repeated continuously. Press the STOP button to cancel Repeat playback. • All Tracks Repeat Begin playback as u
ページ15に含まれる内容の要旨
Shuffle (SHUFF)/Random Playback While at stop mode, press the P-MODE button until the SHUFF indicator appears in the display. Press the PLAY/PAUSE button, the player will randomly select a track for playback and will ANTI- SHOCK SHUFF continue playing the tracks on the disc in random until all tracks have been played. To cancel Shuffle Playback, press the P-MODE button until the SHUFF indicator disappears or press the STOP button. Intro Scan (INTRO) Playback This feature plays only the first
ページ16に含まれる内容の要旨
PROGRAMMED PLAYBACK You can program the player to play just the tracks you want to hear in the specific order that you want them to play. A maximum of 20 tracks can be programmed. 1.) Press the PROG (Program) button. The PROG ANTI- SHOCK PROG indicator together with the track number “0 0” flash in the display, and the program memory number “0 1” appears. 2.) Press the or buttons to select the first PROG ANTI- SHOCK track to be programmed. Example: Track number 7. 3.) When the desired track num
ページ17に含まれる内容の要旨
6.) After the last programmed track has played ANTI- SHOCK the player stops and the display again shows the total tracks and playing time. However the programmed sequence remain in the memory. Press the PROG button, then the PLAY/PAUSE button to play the programmed sequence again. 7.) To erase the programmed sequence from the memory press STOP button at stop mode, or open the CD door. PROGRAMMED REPEAT PLAYBACK You may use the Program and Repeat Playback functions together to continuously repe
ページ18に含まれる内容の要旨
CARE AND MAINTENANCE CLEANING THE CABINET Wipe with a soft cloth. If the cabinet is very dirty, dampen the cloth with a weak solution of neutral detergent and water, and then wipe clean. CLEANING THE LENS A dirty lens will cause sound skipping and, if the lens is very dirty, the CD may not work. Open the disc cover and clean the lens as follows: DUST OR DRY PARTICLES Using a camera lens brush/blower, blow on the lens several times, then wipe it lightly with the brush to remove dust. Then, blow o
ページ19に含まれる内容の要旨
LIMITED WARRANTY Emerson Radio Corp. warrants manufacturing defects in original material, including original parts and workmanship, under normal use and conditions, for a period of ninety (90) days from the date of original purchase in the U.S. With your dated proof of purchase, we will provide repair service at no charge for labor and parts at an authorized Depot Repair Facility, or replace the product in our discretion. For repair or replacement, pack your unit in a padded box, enclose your c
ページ20に含まれる内容の要旨
EMERSON RADIO CORP. EMERSON Part No. : 16-2885 304-01 PRINTED IN CHINA HD7003_ib040703.p65 19 7/4/2003, 11:15
