ページ1に含まれる内容の要旨
Portable CD-R/RW Player
with AM/FM Stereo Radio
and Cassette Recorder
OWNER’S MANUAL
PD9814
Visit our web site at www.emersonradio.com
PD9814_053105.p65 26 31/5/2005, 10:31
ページ2に含まれる内容の要旨
CAUTION TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ! The lightning flash with arrow- The exclamation point within WARNING: TO REDUCE THE head symbol, within an equi- an equilateral triangle is in- RISK OF ELECTRIC SHOCK lateral triangle is inten
ページ3に含まれる内容の要旨
BEFORE WE BEGIN Thank you for purchasing this Emerson audio product. The Emerson brand is your assurance of quality, performance and value. Our engineers have included many useful and convenient features in this product. Please be sure to read this Owner’ s Manual completely to make sure you are getting the maximum benefit from each feature. This product was manufactured using the highest quality components and standards of workmanship. It was tested by Emerson inspectors and found to be in per
ページ4に含まれる内容の要旨
IMPORTANT NOTES • Avoid installing this unit in places • Operate controls and switches as exposed to direct sunlight or close to described in the manual. heat radiating appliances such as • Before turning ‘On’ the power, make electric heaters, on top of other stereo certain that power cord is properly equipment that radiates too much heat, installed. places lacking ventilation or dusty areas, • Store your CDs, cassettes in a cool area places subject to constant vibration and/ to avoid damage
ページ5に含まれる内容の要旨
PREPARATION FOR USE Unpacking and Set Up •Carefully remove the unit from the carton and remove all packing materials from the unit. •Carefully remove any small strips of tape which may have been used to keep the CD and Cassette doors closed during shipment. •Open the CD compartment by lifting up the OPEN/CLOSE tab on top panel. Inside the CD compartment you will see a “dummy” CD protection card which is used to prevent the laser pick-up from moving during shipment. Carefully remove this ca
ページ6に含まれる内容の要旨
AC Operation Connect the small end of the AC Power Cord to the AC socket on the back cabinet, then insert the plug in any convenient household 120V 60Hz AC outlet. Note: This unit has a polarized AC plug with one wide blade and one narrow blade. This plug will only fit into a matching polarized AC outlet. This is a safety feature to reduce the possibility of electric shock. If this plug will not fit in your AC outlet, you probably have an outdated non-polarized outlet. You should have your outda
ページ7に含まれる内容の要旨
Battery Operation 1.) Remove the battery compartment door on the bottom of the cabinet by pressing OPEN down on the two “ ” marks and slide it to open. OPEN OPEN 2.)Insert 8 UM-2 “C” size batteries into the battery compartment according to the polarity diagram engraved inside the compartment. If the batteries are inserted incorrectly the unit will not work. 3.) Replace the battery compartment door. Note: In order to operate the unit on battery power the AC cord must be disconnected from the AC
ページ8に含まれる内容の要旨
BATTERY PRECAUTIONS Follow these precautions when using batteries in this device: 1. Use only the size and type of batteries specified. 2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device. 3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries with fresh ones. 4. If the device is not to be used for a long period of time, remove the batteries
ページ9に含まれる内容の要旨
LOCATION OF CONTROLS AND INDICATORS Top Panel 7 6 8 5 9 4 3 10 2 11 1 Front Panel 23 16 18 21 15 17 19 20 22 14 14 13 12 24 8 PD9814_053105.p65 8 31/5/2005, 10:31
ページ10に含まれる内容の要旨
1.) BASS BOOST Button. 2.) CD Door. 3.) VOLUME Control. 4.) FUNCTION (CD / TAPE-OFF / RADIO) Selector Switch. 5.) Phones (Stereo Headphone) Jack. 6.) AC Cord Socket (Back Cabinet). 7.) FM Telescopic Antenna. 8.) Carrying Handle. 9.) BAND (FM ST / FM / AM) Selector Switch. 10.) TUNING Control. 11.) CD Door OPEN CLOSE Tab. 12.) Cassette Control Keys. ( Record / Play / Rewind / F. Fwd / Stop-Ejec ct t / Pause) 13.) Cassette Door. 14.) Speakers. 15.) CD REPEAT Button. 16.) CD PROG
ページ11に含まれる内容の要旨
OPERATING INSTRUCTIONS Listening To The Radio Tuner Information This system features a normal AM/FM analog tuning system. Unlike a digital tuner it does not automatically lock in on the exact frequency of a station. However instead of a dial scale and a moving dial pointer we have included a digital frequency display to help you tune more accurately. Do not be concerned if you cannot easily tune the display to the exact frequency of your favorite stations, especially on the AM band. Slowly rotat
ページ12に含まれる内容の要旨
Antenna Information AM The AM antenna is inside the cabinet. If AM reception is unsatisfactory try rotating the entire unit until you find the position that provides the best reception. FM Extend and vary the direction of the FM antenna to find the position that provides the best reception. 11 PD9814_053105.p65 11 31/5/2005, 10:31
ページ13に含まれる内容の要旨
Playing Compact Discs Note: Although this portable CD player can read CD-R and CD-RW discs, in addition to normal CDs, the playability of CD-R/RW discs may be affected by the type of software that was used to create the discs, as well as the quality and condition of the blank media you are using. 100% playability cannot be guaranteed. This is not an indication of a problem with the player. Normal Playback 1.) Move the FUNCTION selector to the CD position. The LCD display light comes ‘ On ’. 2.)
ページ14に含まれる内容の要旨
4.) Press the button to begin playback on Track 01. The Indicator appears in the display . • To skip to higher or lower numbered tracks during playback press the or button repeatedly until the desired track number appears in the display. Playback will begin on the selected track. • To search rapidly forward or backward during playback to locate a specific portion of a track, depress and hold the or button. The player will search rapidly forward or backward as long as the buttons are
ページ15に含まれる内容の要旨
Repeat Playback You can program the player to repeat either a single track or all tracks on the disc continuously. The Repeat function can only be activated while a disc is playing. One Track Repeat 1.) Select the track you wish to repeat with the or buttons and then pres ss s the button to begin playback. 2.) Press the REPEAT button once. The REPEAT Indicator appears.The selected track will be repeated continuously. To cancel One Track Repeat press the (Stop) button. All Tracks Repeat 1.)
ページ16に含まれる内容の要旨
Programmed Playback You can program up to 20 tracks on a disc to playback in any desired order. You may also program a specific track to play several times within the same program. Note: The player cannot be programmed while a disc is playing. If a disc is playing press the (Stop) button to stop playback before you begin the programming steps below. 1.) Move the FUNCTION selector to CD position, insert your disc in the player, close the door, and wait until the total track number, playing time
ページ17に含まれる内容の要旨
Program Repeat Playback You can use the Program and Repeat features together to continuously repeat a programmed sequence of tracks. First, program the desired tracks according to Steps 1 through 7 on page 15. When Programmed Playback begins press the REPEAT button twice to activate the All Tracks Repeat feature. The ALL REPEAT Indicator appears in LCD display and all the tracks in your programmed sequence will be repeated continuously. To cancel Programmed Repeat Playback press the (Stop) butt
ページ18に含まれる内容の要旨
Playing Cassette Tapes 1.) Open the cassette door by pressing the Stop/Eject key. . 2.) Place a pre-recorded cassette tape with the exposed tape facing down and the full reel on the left side. 3.) Move the FUNCTION selector to the TAPE-OFF position. 4.) Press the cassette Play key to begin playback. 5.) Set the VOLUME and BASS BOOST controls as desired. 6.) To advance the tape rapidly press the F.Fwd key. To stop the tape before it ends press the Stop/Eject key. . 7.) To rewind the tape rapidly
ページ19に含まれる内容の要旨
IMPORTANT: Always press the Stop/Eject key to shut off the tape motor before opening the cassette door to remove your tape. The Automatic Stop System does not function in the F.Fwd and Rewind modes. When the tape ends in the F.Fwd and Rewind modes the motor continues to run. You must pres ss s the Stop/Eject key to shut off the motor before opening the door to remove your tape. Making A Tape Recording This model allows you to make tape recordings directly from the CD player, or the radio. • R
ページ20に含まれる内容の要旨
Automatic Recording Volume Level Control This unit has an Automatic Level Control (ALC) circuit which controls the recording volume level and prevents overloaded and distorted recordings. The VOLUME control has no effect on recording volume level. You may change the VOLUME control setting during the recording or even reduce the volume level to “Minimum”. This will not effect the level of the recording. Stereo Headphone Jack Connect a set of stereo headphones (not included) with a 3.5mm mini plug
