ページ1に含まれる内容の要旨
Child Restraint/Booster Seat
Owner’s Manual
READ THIS MANUAL
Do not install or use this child restraint until you read and understand the instructions in this manual.
FAILURE TO PROPERLY USE THIS CHILD RESTRAINT INCREASES THE RISK OF SERIOUS
INJURY OR DEATH IN A SUDDEN STOP OR CRASH.
© 2007 Graco ISPC110BB 12/07 US
ページ2に含まれる内容の要旨
Table of Contents 1.0 Warnings to Parents and Other Users 7.3 SAFE Vehicle Seat Belt Systems ................19 ........................4 7.4 For Built-in Harness Only ...20 2.0 Registration Information.........5 2.1 Register Your Child Restraint 5 7.5 WITH or WITHOUT Built-in 2.2 Recall Information..........5 Harness ....................21 2.3 If You Need Help ..........5 7.6 To Install Locking Clip......22 3.0 Features................... 6-7 7.7 UNSAFE Vehicle Bel
ページ3に含まれる内容の要旨
Table of Contents (cont.) 12.0 Harness Removal ......... 38-42 13.0 Using Your Child Restraint WITHOUT Built-in Harness........... 43-45 14.0 Securing Child & Booster Seat in .. Vehicle ....................46 15.0 Adjusting Head Support........47 16.0 Removing Back Support .... 48-50 17.0 Securing Child in Vehicle Belt with Shoulder Belt Positioning Clip 51-54 18.0 Using the Tether..............55 18.1 Storing LATCH and Tether..56 19.0 Airplane Use ................57 20.0 Ac
ページ4に含まれる内容の要旨
1.0 Warnings to Parents and Other Users Failure to properly use this child restraint increases the risk of serious injury or death in a sharp turn, sudden stop or crash. Your child’s safety depends on you installing and using this child restraint correctly. Even if using this child restraint seems easy to figure out on your own, it is very important to READ THE OWNER’S MANUAL and the vehicle owner’s manual. Your child’s safety depends on: 1. Choosing the correct mode of use for the child rest
ページ5に含まれる内容の要旨
2.2 For Recall Information 2.0 Registration Information Model Number: Call the U.S. Government’s Vehicle Safety Manufactured in: Hotline at: 1-888-327-4236 Purchase Date: (TTY:1-800-424-9153), or go to http://www.NHTSA.gov or contact Graco: 1-8
ページ6に含まれる内容の要旨
3.0 Features Harness slots Height adjust button Shoulder belt guide Body support Head support Harness buckle Crotch strap Harness covers Harness clip Storage compartment (one on each side) Vehicle belt Recline guide foot Harness Cupholder Adjustment adjuster strap lever (above strap) Recline handle 6
ページ7に含まれる内容の要旨
The locking clip is stored on the back of the child restraint. You will need to use it with certain types of vehicle seat Harness slots belts. (behind straps) Strap United States Federal guides Tether Motor Vehicle Safety (behind straps) storage bar Standards have defined a new system for LATCH installing child restraints storage bars (on each side in vehicles. The system of seat) Red Rollers is called LATCH (Lower Release (behind straps) Anchorage and Tether buttons for CHild
ページ8に含まれる内容の要旨
4.0 Assembling the Child Restraint Adult assembly required. KEEP GUTTERS CLEAR 1. Lay child restraint flat on back with armrests out to either side of base. Grab seat pad fabric in sitting area to expose the gutters . MAKE SURE all hands, fingers and other objects are clear of the gutters. 2. MAKE sure the harness straps are securely attached within the “T”-shaped slots around the arms as shown Ë. KEEP GUTTERS CLEAR With your other hand, raise seat back so that both arms LOCK i
ページ9に含まれる内容の要旨
3. Arms should CLICK into the gutters. Seat assembly should appear as shown Í. Í CLICK! 4. To attach armrests line up armrest with CLICK! slots on seat Î. Rotate armrest into place until you hear a “click”. Repeat for other armrest. Î 9
ページ10に含まれる内容の要旨
5. Attach 4 elastic loops from the seat pad under the seat exactly as shown in Ï . Ï 6. Pull elastic loop on the seat pad through the vehicle belt guide on side of seat and attach to hook as shown Ð. Repeat on other side. Ð 10 DO NOT use this car seat after December NE PAS utiliser ce siège d'auto après décembre NO use este asiento para autos después de Diciembre 2013
ページ11に含まれる内容の要旨
7. Squeeze height adjust button Ñ and push head support into slots Ò on the back support as shown. Head support will click into the back Ñ support. You may need to unfasten the hook and loop attachment tape on both sides at the top of the back support to allow for easier access to the slots. Always use child restraint with head support installed and properly adjusted. Ò CLICK! . 11
ページ12に含まれる内容の要旨
8. The assembly is now complete. 12
ページ13に含まれる内容の要旨
5.0 Important Information • NO CHILD RESTRAINT CAN GUARANTEE • DO NOT use locking clip in booster mode. PROTECTION FROM INJURY. However, • NEVER PLACE THIS proper use of this child restraint reduces the CHILD RESTRAINT IN A risk of serious injury or death to your child. VEHICLE SEATING • DO NOT INSTALL OR USE THIS CHILD LOCATION THAT HAS A RESTRAINT UNTIL YOU READ AND FRONT AIR BAG. If an air bag UNDERSTAND THE INSTRUCTIONS IN THIS inflates, it can hit the child and child restraint MAN
ページ14に含まれる内容の要旨
• NEVER USE CHILD RESTRAINT IF IT HAS • NEVER LEAVE A CHILD RESTRAINT DAMAGED OR MISSING PARTS. Do not use UNSECURED IN YOUR VEHICLE. An a cut, frayed or damaged child restraint unsecured child restraint can be thrown around harness, LATCH belt or vehicle seat belt. and may injure occupants in a sharp turn, • THE CHILD RESTRAINT CAN BECOME sudden stop or crash. Remove it or make sure VERY HOT IF LEFT IN THE SUN. Contact with that it is securely belted in the vehicle. If not these
ページ15に含まれる内容の要旨
6.0 Height and Weight Limitations FAILURE TO USE CHILD RESTRAINT IN A MANNER APPROPRIATE FOR YOUR CHILD’S SIZE MAY INCREASE THE RISK OF SERIOUS INJURY OR DEATH. Instructions for the use of this child restraint differ greatly depending on the size of your child. Be sure you are using the child restraint in the correct mode and with the correct features for your child. 6.1 WITH Built-In Harness Your child must meet all requirements: • Weight: 20 to 65 lbs (mass between 9 and 29.5 kg) • Heigh
ページ16に含まれる内容の要旨
6.2 WITHOUT Built-in Harness Your child must meet all requirements: • Weight: 30 to 100 lbs (mass between 13.6 and 45 kg) • Height: 38 to 57 inches (96 and 145 cm) in height • approximately 3-10 years of age • the shoulder belt MUST lie across child’s shoulder as shown and the lap portion of the belt is positionned low on the child’s hips. • Child’s ears are BELOW top of booster seat. If tops of ears are above top of seat, child is too large for booster seat. If child is between 30 and 6
ページ17に含まれる内容の要旨
6.3 WITHOUT Back Support Your child must meet all requirements: • weigh between 40 and 100 lbs. (mass between 18 and 45 kg), • and are between 40 and 57 inches (101 and 145 cm) in height, • approximately 4-10 years of age • the shoulder belt MUST lie across child’s shoulder as shown and the lap portion of the belt is positionned low on the child’s hips. When sitting on the booster seat, your child’s ears should be below the top of the vehicle seat cushion / head rest. Your Graco
ページ18に含まれる内容の要旨
7.0 Choosing an Appropriate Vehicle Seat Location 7.1 Vehicle Seat Location Requirements IMPROPER PLACEMENT OF THE CHILD RESTRAINT INCREASES THE RISK OF SERIOUS INJURY OR DEATH. Some seating positions in your vehicle may not be safe for this child restraint. Some vehicles do not have any seating positions that can be used safely with the child restraint. If you are not sure where to place the child restraint in your vehicle, consult your vehicle owner’s manual or call Graco Children’s Produ
ページ19に含まれる内容の要旨
7.2 Vehicle Seat Belt Requirements MANY SEAT BELT SYSTEMS ARE NOT SAFE TO USE WITH THE CHILD RESTRAINT. THE VEHICLE SEAT BELT MUST BE DESIGNED TO HOLD THE CHILD RESTRAINT TIGHTLY AT ALL TIMES. Pay careful attention to these systems; some of the seat belts that are not safe to use look very much like seat belts that are safe to use. If you are unsure, consult your vehicle owner’s manual or call Graco Children’s Products Inc., 1-800-345-4109. 7.3 SAFE Vehicle Seat Belt Systems THE FO
ページ20に含まれる内容の要旨
7.4 For Built-in Harness Only • Lap Belts - Manually Adjusted When buckled, the belt is tightened manually by pulling on the excess belt. • Lap Belts with Automatic Locking Retractor (ALR) The automatic locking retractor will not permit the lap belt to lengthen once it is buckled. Tighten the belt by feeding the belt back into the retractor while pushing down hard on the child restraint. 20
