ページ1に含まれる内容の要旨
TM
AdvancedFrame Expedition™
Inflatable Kayak
Owner’s Manual
MODEL AE1009
PATENTED
1 PERSON KAYAK
IMPORTANT!
PLEASE READ THIS MANUAL CAREFULLY BEFORE PROCEEDING. AFTER READING
THIS MANUAL, SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ADVANCED ELEMENTS, INC. 2006 REV 06-001
ページ2に含まれる内容の要旨
TM INTRODUCTION It is our goal, at Advanced Elements, to develop new and unique paddles- ports products that enhance our customers’ outdoor experience. Our focus is on designing and manufacturing “Inflatable kayaks with cutting edge technology”. Our kayaks incorporate many different materials and compo- nents and deliver high performance at a very reasonable price. We are the makers of the AdvancedFrame™ Inflatable kayaks, DragonFly™ Inflatable kayaks and StraitEdge™ Canoe and Kayaks. T
ページ3に含まれる内容の要旨
TABLE OF CONTENTS 1. Caution/Safety .................................................................. 4 1.1 Boating Safety ........................................................ 5 2. Specification ...................................................................... 6 2.1 Capacity ................................................................. 6 2.2 Features .................................................................. 6 3. Assembly/Inflating/Deflation Instruction ............
ページ4に含まれる内容の要旨
TM 1. CAUTION - SAFETY WARNING Users of this product agree by their use to accept the inherent risks involved in this paddlesports activity and agree to follow all instructions, cautions, and warnings carefully before using this Kayak. (PLEASE READ CAUTION STATEMENT CAREFULLY) CAUTION SAFETY WARNING PADDLESPORTS CAN BE VERY DANGEROUS AND PHYSICALLY DEMAND- ING. THE USER OF THIS PRODUCT SHOULD UNDERSTAND THAT PARTICI- PATION IN PADDLESPORTS MAY INVOLVE SERIOUS INJURY OR DEATH. OBSERVE TH
ページ5に含まれる内容の要旨
AdvancedFrame Expedition™ Inflatable Kayak Owner’s Manual 1.1 Boating Safety This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Indicates an imminently hazardous situation which, if not avoided, will DANGER result in death or serious injury or substantial property damage. Indicates a potentially hazardous WARNING situation which, if not avoided, could
ページ6に含まれる内容の要旨
TM 2. SPECIFICATION Dimensions: Length: 13’ Width: 32” Weight: 42 lbs (19 kg) Max. Person Capacity: 400 lbs (181 kg) Max. Persons & Gear Capacity: 450 lbs (204 kg) Recommended Pressure: Main chambers: 2.0 psi (0.14 bar) Floor chamber: 1.0 psi (0.07 bar) 2.1 Capacity The person/load capacity is determined by the availability of proper seating on the kayak. Acceptable seating determines the numb
ページ7に含まれる内容の要旨
AdvancedFrame Expedition™ Inflatable Kayak Owner’s Manual 3. ASSEMBLY/INFLATING/DEFLATION INSTRUCTION The AdvancedFrame Expedition™ Kayak has a rigid frame in the bow and stern that enhances its performance. 3.1 Assembly The illustration below shows the general assembly of the kayak. Your kayak comes from the factory pre-assembled. The only assembly you should need to do is attach the adjustable seat. INFLATABLE FLOOR Step 3 ADV
ページ8に含まれる内容の要旨
TM 2. Place the AdvancedFrame™ tube (with Ribs installed), into the Outer Skin, making sure that the air valve is upright and at the back of the boat and lined up with the opening on the outer cover. Chamber 1 and 2 are separate chambers but equalize in pressure because they are inside a fabric cover. Ideally you want to put half of the air in chamber 1 and half in chamber 2. This way if you suddenly lose pressure in one chamber y ou should have another chamber
ページ9に含まれる内容の要旨
AdvancedFrame Expedition™ Inflatable Kayak Owner’s Manual Diagram of Inflation Chambers 3.3 Inflating IMPORTANT: Before inflating, check to be sure that the kayak is completely assembled. Inflate your kayak in the following order. Failure to follow these instructions may cause damage to your kayak. Do not over inflate. 1. Partially inflate chamber 1 until the kayak begins to fill out or appears to be half way inflated See Figure 1). then close cap. Check to be sure the valve is
ページ10に含まれる内容の要旨
TM INFLATION TIPS Use either a bellows style foot pump or two-way hand pump to inflate to your kayak. Be sure that the fitting on the pump hose fits snug in the valve on the kayak. NEVER USE COMPRESSORS, CO2 OR COMPRESSED AIR AS THEY MAY DAMAGE YOUR KAYAK. The main chambers use high-end military style, plunger valves (Push in and twist to activate the spring-loaded check valve for inflating, or push-in and twist to lock open for deflating). 3.4 Over Inflation CAUTION: Water temperature
ページ11に含まれる内容の要旨
AdvancedFrame Expedition™ Inflatable Kayak Owner’s Manual 4. GUIDELINES FOR USAGE Paddlesports can be very dangerous and physically demanding. The user of this product should understand that participation in paddlesports may involve serious injury or death. Observe the following safety standards whenever using this product. The user of this product acknowledges both an understanding and an
ページ12に含まれる内容の要旨
TM Do not store your kayak for an extended period of time while wet. Follow these steps for removing excess water. 1. Unzip the 2 zippers that run down the center of the kayak. 2. Remove the gray fabric tube and cover, along with the inflatable floor, separating it from the outer cover. In order to completely separate these parts, it is necessary to unscrew the locking nut on the spring v alve. 3. Use a sponge or towel and wipe up any excess water in the outer cover. 4
ページ13に含まれる内容の要旨
AdvancedFrame Expedition™ Inflatable Kayak Owner’s Manual 7. TROUBLESHOOTING PROBLEM SOLUTION Does not hold air The spring valve uses a plunger system. The only time the plunger while inflating. should be in the open position is when you are deflating. Make sure that the plunger is closed to inflate. Push the plunger in and rotate counter-clockwise. The kayak is sagging Be sure that the right pump is being used. You need a bellows foot or under inflated. pump or a double action hand p
ページ14に含まれる内容の要旨
PADDLING NOTES: It is always a good idea to keep notes of your paddling experiences. Your notes can serve as a reminder of what to look out for, as well as what gear to bring along, and what conditions are like. DATE TIME LOCATION NOTES 1
ページ15に含まれる内容の要旨
NOTES: 1
ページ16に含まれる内容の要旨
NOTES: 1
ページ17に含まれる内容の要旨
Note: If your state requires this document of licensing your boat, please contact Advanced Elements Customer Service Department for completion, or for more information. MANUFACTURER’S STATEMENT OF ORIGIN FOR A VESSEL SOLD IN THE STATE OF_____________________________________ The undersigned manufacturer hereby certifies that the new boat described below, the property of said manufacturer, has been transferred this _________day of _____________________, 20_________on Invoice# _____________
ページ18に含まれる内容の要旨
Declaration of Conformity (according to ISO/IEC Guide 22 and EN 45014) Manufactur er’s Name: Advanced Elements, Inc. Manufactur er’s Address: P.O. Box 5128 Concord, CA 94524 declar es, that the product: Pr oduct Name: AdvancedFrame Expedition™ Kayak Model Number (s): AE100 to which this declaration relates, meets the essential health and safety r equirements and is in conformity with the relevant EU Directiv
ページ19に含まれる内容の要旨
LIMITED WARRANTY Advanced Elements, Inc. warrants this product to be free from defects in material or workmanship for a period of one year from the date of purchase. Products that prove to be defective under conditions of normal and proper use during the warranty period because of defective workmanship or faulty material will be replaced or repaired without charge. For warranty service, contact Advanced Elements, Inc. Advanced Elements, Inc shall inspect all warranty claims and in the event
ページ20に含まれる内容の要旨
IMPORTANT! PLEASE READ THIS MANUAL CAREFULLY BEFORE PROCEEDING. AFTER READING THIS MANUAL, SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. If you would like a catalog of our latest products please visit our website at www.advancedelements.com or call Toll Free 866-262-9076 PLEASE COMPLETE THE OTHER SIDE OF THIS WARRANTY REGISTRATION CARD AND RETURN TO ADVANCED ELEMENTS, INC. PLACE STAMP HERE TM P.O. Box 5128 Concord, CA 94524 1-866-262-9076 www.advancedelements.com Email: info@advancede
