ページ1に含まれる内容の要旨
OperatiOn and p ts Manual ar
SERIES
MODEL MVC88VTH
MODEL MVC88VTHW
ONE-WAY pLATE COMpACTOR
(HONDA GX160UT2QMX2 GASOLINE ENGINE)
Revision #2 (12/09/13)
To find the latest revision of this
publication, visit our website at:
www.multiquip.com
THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
ページ2に含まれる内容の要旨
pROpOSITION 65 WARNING page 2 — MVC88VTH/VTHW pLa Te COMpa CTOR • OpeRa TiOn and paRTs ManuaL — ReV . #2 (12/09/13)
ページ3に含まれる内容の要旨
NOTES MVC88VTH/VTHW pLaTe COMpa CTOR • OpeRa TiOn and paRTs ManuaL — ReV . #2 (12/09/13) — page 3
ページ4に含まれる内容の要旨
TAbLE Of CONTENTS Honda GX160UTQMX2 Engine MVC88VTH/MVC88VTHW Component Drawings forward plate Compactor Cylinder Head Assembly .................................. 42-43 Proposition 65 Warning ........................................... 2 Cylinder Barrel Assembly ................................. 44-45 Table Of Contents .................................................... 4 Crankcase Cover Assembly ............................. 46-47 Parts Ordering Procedures ...................................
ページ5に含まれる内容の要旨
pARTS ORDERING pROCEDURES Ordering parts has never been easier! Choose from three easy options: Effective: st January 1 , 2006 best deal! Order via internet (dealers Only): If you have an MQ Account, to obtain a Username Order parts on-line using Multiquip’s SmartEquip website! and Password, E-mail us at: parts@multiquip. com. View Parts Diagrams To obtain an MQ Account, contact your Order Parts District Sales Manager for more information. Print Specifi cation Information Use the inte
ページ6に含まれる内容の要旨
SAfETY INfORMATION Do not operate or service the equipment before reading Potential hazards associated with the operation of this the entire manual. Safety precautions should be followed equipment will be referenced with hazard symbols which at all times when operating this equipment. may appear throughout this manual in conjunction with Failure to read and understand the safety safety messages. messages and operating instructions could result in injury to yourself and others. saFeTy Message
ページ7に含まれる内容の要旨
SAfETY INfORMATION geneRaL saFeTy NOTICE CauTiOn This equipment should only be operated by trained and qualifi ed personnel 18 years of age and older. neVeR operate this equipment without proper protective clothing, shatterproof glasses, respiratory protection, Whenever necessary, replace nameplate, operation and hearing protection, steel-toed boots and other protective safety decals when they become diffi cult read. devices required by the job or city and state regulations. Manu
ページ8に含まれる内容の要旨
SAfETY INfORMATION COMpaCTOR saFeTy WaRning dangeR dO nOT place hands or fingers inside engine compartment when engine is running. neVeR operate the equipment in an explosive atmosphere or near combustible materials. An neVeR operate the engine with heat shields or explosion or fi re could result causing severe guards removed. bodily harm or even death. Keep fi ngers, hands hair and clothing away WaRning from all moving parts to prevent injury. neVeR disconnect any emergency
ページ9に含まれる内容の要旨
SAfETY INfORMATION FueL saFeTy baTTeRy saFeTy (eLeCTRiC sTaRT OnLy) dangeR dangeR dO nOT add fuel to equipment if it is placed inside truck dO nOT drop the battery. There is a possibility that the bed with plastic liner. Possibility exists of explosion or battery will explode. fi re due to static electricity. dO nOT expose the battery to open fl ames, sparks, cigarettes, etc. The battery contains FUEL combustible gases and liquids. If these gases and liquids come into contact with a
ページ10に含まれる内容の要旨
SAfETY INfORMATION When the life cycle of this equipment is over, remove TRanspORTing saFeTy battery and bring to appropriate facility for lead CauTiOn reclamation. Use safety precautions when handling batteries that contain sulfuric acid. NEVER allow any person or animal to stand underneath When the life cycle of this equipment is over, it is the equipment while lifting. recommended that the trowel frame and all other metal NOTICE parts be sent to a recycling center. Metal recyc
ページ11に含まれる内容の要旨
SpECIfICATIONS Table 1. MVC88VTH/VTHW One-Way plate Compactor specifications Centrifugal Force 3,372 lbs. (1,530 kg) Vibration Frequency 6,000 vpm (60 Hz) Traveling Speed 82 ft/min (25 m/min) Plate Size (L x W) 19.7 x 20.7 in (.500 x .525 mm) Max. Area of Compaction (no extensions) 8,100 sq. ft./hr (752 sq. m/hr) Operating Weight MVC88VTGH 207 lbs. (95 kg.) Operating Weight MVC88VTHW 229 lbs. (104 kg.) Water Tank Capacity 13.7 qt (13.0 liters) Anti-Vibration Handle Yes Lubricating Oil in Vibra
ページ12に含まれる内容の要旨
DIMENSIONS A D B C E Figure 1. Dimensions Table 3. dimensions ReF. des in. (MM) A 24.5 (622) B 22.5 (571) C 43.5 (1,105) D 36.0 (914) E 19.7 (500) page 12 — MVC88VTH/VTHW pLa Te COMpa CTOR • OpeRa TiOn and paRTs ManuaL — ReV . #2 (12/09/13)
ページ13に含まれる内容の要旨
GENERAL INfORMATION deFiniTiOn OF pLa Te COMpa CTOR FRequenCy/speed The Mikasa MVC88VTH/VTHW is a walk behind, plate The compactor's vibrating plate produces a vibration compactor designed for the compaction of sand, mixed soils frequency of 6,000 VPM (vibrations per minute). The and asphalt. This plate compactor is a powerful compacting travel speed of the compactor is approximately 82 ft/ tool capable of applying a tremendous force in consecutive minute (25 meters/minute). high frequency vi
ページ14に含まれる内容の要旨
COMpACTOR COMpONENTS MVC88VTHW 1 MVC88VTH 2 9 3 4 8 10 5 OFF 6 ON 7 11 Figure 2. Plate Compactor Components Figure 2 shows the location of the basic controls and 7. Water Tube-sprinkler (VTHW Only) – Supplies water components of the MVC88VTH/VTHW Plate Compactor. to the soil via a splash plate. The function of each control is described below: 8. Water shut-Off Valve (VTHW Only) – Turn this valve 1. Handle bar – When operating the compactor use this downward to let water flow from the water ta
ページ15に含まれる内容の要旨
COMpACTOR COMpONENTS 1 9 8 2 7 12 6 5 11 10 4 3 Figure 3. Engine Controls and Components iniTiaL seRViCing The engine (Figure 3) must be checked for proper 6. air Cleaner – Prevents dirt and other debris from entering the fuel system. Remove wing-nut on top of lubrication and filled with fuel prior to operation. Refer to the manufacturer's engine manual for instructions and details air filter canister to gain access to filter element. of operation and servicing. NOTICE 1. Fuel Filler Cap – R
ページ16に含まれる内容の要旨
INSpECTION before starting dangeR 1. Read all safety instructions at the beginning of manual. eXpLOsiVe FueL! 2. Clean the compactor, removing dirt and dust, Motor fuels are highly flammable and can particularly the engine cooling air inlet, carburetor and be dangerous if mishandled. dO nOT air cleaner. smoke while refueling. dO nOT attempt to refuel the compactor if the engine is 3. Check the air filter for dirt and dust. If air filter is dirty, hot! or running. replace air filter with
ページ17に含まれる内容の要旨
INSpECTION V-beLT V-belt Tension The V-belt tension is proper if the V-belt bends 10 to 15 mm V-belt Cover Removal (Figure 10) when depressed with finger at midway between To inspect the V-belt, remove the three bolts that secure the clutch and vibrator pulleys. the belt cover to the frame as shown in Figure 8. REMOVE CORRECT V-BELT TENSION 10-15 MM VIBRATOR CLUTCH WHEN DEPRESSED PULLEY AS SHOWN. REMOVE V-BELT V-BELT VIBRATOR PULLEY V-BELT COVER Figure 10. V-Belt Tension Figure 8. V-Belt Cove
ページ18に含まれる内容の要旨
STARTUp 3. Place the choke lever (Figure 14) in the “CLOsed” CauTiOn position if starting a cold engine. dO nOT attempt to operate the compactor until the Safety, General Information and CHOKE LEVER Inspection sections of this manual have been read and thoroughly understood. This section is intended to assist the operator with the initial start-up of the compactor. It is extremely important that this section be read carefully before attempting to use the compactor in the field. sTaRTin
ページ19に含まれる内容の要旨
STARTUp 9. If the sprinkling of water is required, place water valve in the On position. OFF ON Figure 18. Water Valve (ON) Figure 16. Starter Grip 10. To begin compacting, place the throttle lever (Figure 19) NOTICE in the “Run ” position. dO nOT pull the starter rope all the way to the end dO nOT release the starter rope after pulling. Allow it to rewind as soon as possible. 6. When engine starts, release the starter grip and allow the rope to recoil. 7. If the choke lever was moved to th
ページ20に含まれる内容の要旨
OpERATION OpeRa TiOn sTOpping THe engine CauTiOn normal shutdown aLWays follow all safety rules referenced 1. Move the throttle lever to the idle position (Figure 20) in the safety section of this manual before and run the engine for three minutes at low speed. operating compactor. Keep work area clear of debris and other objects that could cause damage to the compactor or bodily injury. 1. Once the engine has started, move the engine throttle lever quickly to the run position. 2. With
