ページ1に含まれる内容の要旨
Owner’s manual
Mode d’emploi
Manual de instrucciones
AM / FM CD / MP3 / WMA PLAYER
•
RADIO AM/FM-LECTEUR CD/MP3/WMA
•
REPRODUCTOR DE AM/FM CD/MP3/WMA
Clarion Co., Ltd.
All Rights Reserved. Copyright © 2002: Clarion Co., Ltd.
PE-2564B
Printed in China / Imprimé en Chine / Impreso en China
2002/12 (A·C) 280-7906-00
ページ2に含まれる内容の要旨
English Thank you for purchasing this Clarion product. ∗ Please read this owner’s manual in its entirety before operating this equipment. ∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). ∗ Check the contents of the enclosed warranty card and keep it carefully with this manual. ∗ This manual includes the operating procedures of the CD changer, MD changer, SIRIUS and TV tuner, DVD DECK, BB. DTS/AC3 connected via the CeNET cable. The CD changer, MD changer
ページ3に含まれる内容の要旨
English English English Major Button Operations When External Equipment is Connected to This Unit Sloping Console 2. PRECAUTIONS house and hosted by DJs who know and love This unit uses sloping console to make large-screen displays possible. the music. Do you like Reggae? How about 1. When the inside of the car is very cold and the 2. Driving on extremely bumpy roads which cause When you use the sloping console, be sure to close it. Classic Rock or New Rock? Sirius has an array player is used s
ページ4に含まれる内容の要旨
English English English Français Español Major Button Operations When External Equipment is 3.CONTROLS / LES COMMANDES / CONTROLES 4. NOMENCLATURE Connected to This Unit Note: Source unit / Appareil pilote / Unidad fuente When the CD/MD/DVD changer • Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold). When the DTS/DOLBY DIGITAL is connected is connected (DVH920) ∗ For details, see the section “CD/MD Names of the Buttons and Their Function
ページ5に含まれる内容の要旨
English 5. DCP The control panel can be detached to prevent Attaching the DCP theft. When detaching the control panel, store it 1. Insert the DCP so that the A section on the in the DCP (DETACHABLE CONTROL PANEL) right side of the DCP catches on the hook B case to prevent scratches. on the unit. We recommend taking the DCP with you when leaving the car. Removing the DCP 1. With the SLOPING CONSOLE closed, turn off the power. 2. Press the [RELEASE] button deeply to open the DCP. [ ] RELEASE butto
ページ6に含まれる内容の要旨
English 6. REMOTE CONTROL Receiver for remote control unit Operating range: 30˚ in all directions Signal transmitter Remote control unit [ ] [ ] FUNC DUAL ZONE [ ],[ ] [ ],[ ] [ ] BAND [ ] ISR [ ] [ ] MUTE DISP [ ] [ ] RDM SCN [ ] RPT Inserting the Batteries 1.Turn the remote control unit over, then slide the rear cover in the direction of the arrow. AA (SUM-3, IECR-6/1.5V) Batteries 2.Insert the AA (SUM-3, IECR-6/1.5V) batteries that came with the remote control unit facin
ページ7に含まれる内容の要旨
English Functions of Remote Control Unit Buttons Mode CD/MD changer Radio/SIRIUS CD/MP3/WMA TV DVD changer Button Switches among radio, SIRIUS tuner, CD/MP3/WMA, DVD Deck, CD/MD changer, DVD [FUNC] changer, TV and AUX. Switches reception Plays the first track. Moves the next disc Switches reception [BAND] band. Top play. in increasing order. band. Increases and decreases volume (in all modes). [ ] , [ ] Moves preset Moves tracks up and down. Moves preset [ ] , [ ] channels
ページ8に含まれる内容の要旨
English 7. OPERATIONS Note:Be sure to read this chapter referring to the front diagrams of Basic Operations chapter “3. CONTROLS” on page 5 (unfold). Adjusting the volume CAUTION Turning the [ROTARY] knob clockwise in- Be sure to lower the volume before switch- creases the volume; turning it counterclockwise ing off the unit power or the ignition key. The decreases the volume. unit remembers its last volume setting. If ∗ The volume level is from 0 (minimum) to 33 (maxi- you switch the power off
ページ9に含まれる内容の要旨
English Basic Operations When the BEQ (BASS BOOST, IMPACT, MID GAIN : –6 to 6 (The factory default EXCITE) is set setting is “0”) “BASS BOOST” ( IMPACT, EXCITE) ➜ MID F : 700Hz/1KHz/2KHz (The factory “BALANCE” ➜ “FADER” ➜ Function default setting is “1k”) mode... MID Q : 1.5/2 (The factory default When the BEQ (USER CUSTOM) is set setting is “2”) “BASS” ➜ “MID” ➜ “TREBLE” ➜ 4. When the adfustment is complete, press the “BALANCE” ➜ “FADER” ➜ Function [A-M] button several times until the fu
ページ10に含まれる内容の要旨
English Basic Operations Radio Operations 3. When the adjustment is complete, press the FM reception [A-M] button several times until the function ® For enhanced FM performance the mode is reached. tuner includes signal actuated stereo control, Enhanced Multi AGC, Impulse noise reduction Adjusting the Beat EQ curcuits and Multipath noise reduction circuits. 1. Press the [BEQ] button and select the Beat EQ mode (1 to 3) to adjust. Changing the reception area 2. Press the [A-M] button and select
ページ11に含まれる内容の要旨
English Radio Operations 2. Press the [a] or [d] button to Auto store automatically seek a station. Auto store is a function for storing up to 6 sta- When the [d] button is pressed, the station is tions that are automatically tuned in sequen- sought in the direction of higher frequencies; if tially. If 6 receivable stations cannot be received, the [a] button is pressed, the station is sought a previously stored station remains in the direction of lower frequencies. unoverwritten at the memory po
ページ12に含まれる内容の要旨
English CD/MP3/WMA Operations 2. Files without MP3/WMA data will not play. MP3/WMA The indication “––:––” appears in the play What is MP3? time display if you attempt to play files with- MP3 is an audio compression method and clas- out MP3/WMA data. sified into audio layer 3 of MPEG standards. Logical format (File system) This audio compression method has penetrated 1. When writing MP3/WMA file on a CD-R disc into PC users and become a standard format. or CD-RW disc, please select “ISO9660 lev
ページ13に含まれる内容の要旨
English CD/MP3/WMA Operations CD/MP3/WMA Radio (SIRIUS) Setting Set to MP3/WMA Set to CD Disc (DVD deck) Mixed with CD and Play CD Play MP3/WMA MP3/WMA type tracks (CD changer) CD type track only Play CD Play CD MP3/WMA type track only Play MP3/WMA Play MP3/WMA (TV) (DVD changer) (MD changer) 2. After making these settings, remove the disc Loading a CD and then reinsert it. 1. Press the [Q] button. The SLOPING CON- 3. When a mixed mode CD is loaded and CD is SOLE opens. set, the tra
ページ14に含まれる内容の要旨
English CD/MP3/WMA Operations MP3/WMA disc 1 Folder ➜ File ➜ Album TAG ➜ Artist TAG ➜ Title TAG ➜ Folder... Root folder Notes: 2 • If the CD playing is not a CD-text CD or no user title has been input, “NO TITLE” appears in the display. • If MP3/WMA disc is not input TAG, “NO TAG” ap- pears in the display. 3 • For MP3, supports ID3 Tags V2.3 / 2.2 / 1.1 / 1.0. • Tag displays give priority to V2.3 / 2.2 • In the case of album Tags for WMA, the informa- tion written into the extension header is d
ページ15に含まれる内容の要旨
English CD/MP3/WMA Operations Folder scan play Random play This function allows you to locate and play the This function allows you to play all tracks re- first 10 seconds of the first track of all the fold- corded on a disc in a random order. ers on an MP3/WMA disc. 1. Press the [RDM] button to perform random 1. Press and hold the [SCN] button for about 1 play. second to folder scan play. The indication “RDM” lights up in the display The indications “FOLDER” and “SCN” light and “TRK RANDOM” (or
ページ16に含まれる内容の要旨
English CD/MP3/WMA Operations Operations Common to Each Mode 3. Press [DN] button to move to the previous play list. LCD type Press [UP] button to move to the next play You can setting LCD type NEGA or POSI. list. ∗ The factory default setting is “NEGA”. Notes: • The SCN/RPT/RDM functions cannot be used 1. Press and hold the [T] button for 1 second or while in the play list mode. longer to switch to the adjustment selection • The title display changes from folder name to play display. list name.
ページ17に含まれる内容の要旨
English Operations Common to Each Mode Entering MESSAGE INFORMATION Setting the method for title scroll Message up to 30 characters long can be stored Set how to scroll in CD-TEXT or MD/MP3/WMA. in memory and displayed for CD, CD changer ∗ The factory default setting is “ON”. and TV stations. 1. Press and hold the [T] button for 1 second or ∗ The factory default setting is “Welcome to Clarion”. longer to switch to the adjustment selection 1. Press and hold the [T] button for 1 second or display.
ページ18に含まれる内容の要旨
English Operations Common to Each Mode Anti-theft indicator Selecting AUX IN sensitivity The red Anti-theft indicator is a function for pre- Make the following settings to select the sensi- venting theft. When the DCP is removed from tivity when sounds from external devices con- the unit, this indicator blinks. nected to this unit are difficult to hear even after adjusting the volume. ∗ The factory default setting is “OFF”. ∗ The factory default setting is “MID”. 1. Press and hold the [T] button
ページ19に含まれる内容の要旨
English Operations Common to Each Mode Setting the button illumination Entering titles Press the [COLOR] button to select a color Titles up to 10 characters long can be stored in type. Each time you press the [COLOR] button, memory and displayed for Radio, CD, CD the type changes in the following orders: changer, tuner station and TV stations. The number of titles that can be entered for each COLOR SCAN ➜ Indigo Blue ➜ Surf Blue ➜ mode are as follows. Silky White ➜ Aqua Green ➜ Fresh Green ➜ Lea
ページ20に含まれる内容の要旨
English 8. OPERATIONS OF ACCESSORIES CD/MD Changer Operations Notes: CD/MD changer functions • If the CD playing is not a CD-text CD or no user When an optional CD/MD changer is connected title has been input, “NO TITLE” appears in the through the CeNET cable, this unit controls all display. CD/MD changer functions. This unit can control • If a CD-text CD is not input its disc title or a track a total of 2 changers. title, “NO TITLE” appears in the display. Press the [FNC] button and select the
