ページ1に含まれる内容の要旨
REMOVING THE EXISTING LEG
EXTENSIONS (FIGURE 2)
1. Shower Chair: Depress the snap button and remove
the existing leg extension. Repeat for all four (4) legs.
2. Transfer Bench: Depress the snap buttons and re-
move the existing leg extensions that are located on
the side of the seat arm.
NOTE: The following illustration represents the exter-
nal leg extension found on the shower chair and/or
the transfer bench. The internal leg extension, found
on the Deluxe/Vinyl padded shower chair, removes
ページ2に含まれる内容の要旨
Transfer Bench (FIGURE 3) INSTALLING THE LEG EXTENSIONS W/3-INCH WARNING SUCTION CUPS Bathtub floor should be dry and free of dirt, oils etc. before installation. WARNING 1. Place the transfer bench into position over the bath- Make sure that the snap buttons protrude through tub with suction cups inside the bathtub and press the same respective adjustment hole of each leg down to adhere suction cups to the extension and an even height adjustment is bathtub floor. achieved. 2. To release the suc
ページ3に含まれる内容の要旨
6 3 7 2 5 Tab Tab 1 4 1 Tab Tab Model No. 6312 Internal Leg Extension Model No. 6314 External Leg Extension 3 3 2 2 Tab 1 Tab 1 Model No. 6318 Model No. 6316 External Leg Extension External Leg Extension FIGURE 1 - LEG EXTENSIONS W/ 3-INCH SUCTION CUPS PARTS LIST QUANTITY ITEM DESCRIPTION 6312 6314 6316 6318 1. SUCTION CUP 2 2 2 2 2. EXTERNAL LEG EXTENSION N/A 2 2 2 3. ANTI-RA
ページ4に含まれる内容の要旨
LIMITED WARRANTY PLEASE NOTE: THE WARRANTY BELOW HAS BEEN DRAFTED TO COMPLY WITH FEDERAL LAW APPLICABLE TO PRODUCTS MANUFACTURED AFTER JULY 4, 1975. This warranty is extended only to the original purchaser/user of our products. This warranty gives you specific legal rights and you may also have other legal rights which vary from state to state. Invacare warrants its product to be free from defects in materials and workmanship for the lifetime of use by original purchaser. If within such warranty
