ページ1に含まれる内容の要旨
Butterfly Trike
Model Number: 72639
Instructions
Please keep these instructions for future reference.
Adult assembly is required.
Tools needed for assembly: Hammer, Phillips Screwdriver, Scrap Block of Wood.
If you have any questions about this product, or are missing a part, please call us toll-free
at 1-800-432-KIDS, rather than return this product to the store.
Age: 2 - 5 years.
Weight Limit: 55 lbs.
ページ2に含まれる内容の要旨
WARNING • Adult supervision is required. • Never use near steps, sloped driveways, hills, roadways, alleys, swimming pools or other bodies of water. • Always wear shoes or sneakers. • Never allow more than one rider. Parts Handlebar Seat Frame Straight Axle 2 Rear Wheels 2 Washers 2 Hubcaps Fork 2 Cap Nuts 2 Fork Covers 2 Lock Washers Pedal Axle 2 Pedals Front Wheel 4 Pedal Hubs #8 x 3" Screw – 1 Cap Nut – 2 Lock Washer – 2 3 #8 x /4" Screw – 4 Washer – 2 (ALL SHOWN ACTUAL SIZE) Fisher-Price, In
ページ3に含まれる内容の要旨
Assembly • Please save all packaging material until assembly is complete to ensure that no parts are discarded. • If you are missing a part, please call us toll-free at 2 Washer 1-800-432-KIDS, rather than return this product to the store. • Please wipe each part with a clean, dry cloth Straight Axle before assembly. Rear Wheel CAUTION Please keep small parts, hardware and plastic bags out of children’s reach. Dispose of plastic bags properly. Hubcap Indented Side Down 1 • Slide a hubcap (p
ページ4に含まれる内容の要旨
Assembly Pedal Hub 4 5 Metal Tab Indented Pedal Axle Side Up Cap Nut Hubcap Metal Tab Rear Wheel Slot Pedal Hub Washer Straight Axle • Fit two pedal hubs onto the pedal axle metal tabs. Make Frame sure the metal tabs fit into the slot in each pedal axle cover. 6 Pedal Hubs Pedal Axle Assembled Rear Wheel Front Wheel Scrap Block of Wood Hole Bottom View • While holding the pedal hubs on the pedal axle, insert the • Turn the frame on its side with the exposed end of the pedal axle into the hole in
ページ5に含まれる内容の要旨
Assembly Pedal Hub 8 Lock Washer 11 Pedal Axle (Inside) Pedal Pedal Axle Pedal Hub Front Wheel Assembly • Turn the front wheel assembly over. • Insert a pedal hub onto the top of the pedal axle and into Scrap Block the hole in the center of the front wheel. of Wood • Insert the remaining pedal hub below the pedal axle and into the hole in the center of the front wheel. • Place a scrap block of wood under the front wheel assembly. • Fit a pedal on the pedal axle. • With the lock washer centered o
ページ6に含まれる内容の要旨
Assembly 13 14 Seat Pegs Handlebar Holes Frame Neck Fork Post • At an angle, insert one peg on the back of the seat into the Fork Cover hole in the rear of the frame. • Insert and snap the other peg on the back of the seat into the other hole in the rear of the frame. One-time assembly is now complete. #8 x 3" Screw – 1 SHOWN ACTUAL SIZE • Turn the frame upright. • Insert the fork post up through the hole in the neck of the frame. Make sure the fork is positioned so that the fork covers face the
ページ7に含まれる内容の要旨
Label Decoration Proper label application will help to keep the labels looking their best! • Wash your hands before applying the labels. • Make sure the areas where the labels will be applied are clean and dry. Wipe your vehicle with a clean, soft, dry cloth to remove any dust or oils. • For best results, avoid applying a label more than once. • Apply the labels as shown in the illustrations below. • After applying a label, rub the label firmly with a cloth to make sure the label is adhered to y
ページ8に含まれる内容の要旨
Maintenance • Check plastic parts regularly and if broken or cracked, dispose of them properly. • Check all fasteners regularly to be sure they are tight. If the fasteners are not tight, tighten them as necessary. • To clean the trike, use a mild soap and water solution and a clean cloth. Rinse clean with water to remove soap residue. Consumer Information Questions? We'd like to hear from you! ® Call Fisher-Price Consumer Affairs, toll-free at 1-800-432-KIDS, 8 AM - 6 PM EST Monday through Frid
