ページ1に含まれる内容の要旨
Owner’s Manual
ページ2に含まれる内容の要旨
Heritage Bass Guitar Cabinets SVT-410HLF / SVT-810E TABLE OF CONTENTS Important Safety Instructions .................................................2 Introduction ..........................................................................4 Eminence Speakers / Impedance: The Golden Rule .................5 Heritage SVT-410HLF Jackplate .............................................6 Heritage SVT-410HLF Hookup Diagrams .................................7 Heritage SVT-410HLF Tech Specs / Se
ページ3に含まれる内容の要旨
Heritage Bass Guitar Cabinets SVT-410HLF / SVT-810E CONSIGNES DE SECURITE IMPORTANTES - LIRE, SUIVRE TOUTES LES INSTRUCTIONS ET LES PRECAUTIONS D’UTILISATION - NE PAS UTILISER PROCHE D’UNE SOURCE DE CHALEUR ET NE PAS BLOQUER OU OBSTRUER LE SYSTEME DE VENTILATION SUR CET APPAREIL. POUR UNE UTILISATION CONFORME, CET APPAREIL NECESSITE ENVIRON 7CM D’ESPACE BIEN VENTILE AUTOUR DE SON SYSTEME DE REFROIDISSEMENT, AINSI QU’UN COURANT D’AIR FRAIS CONSTANT - NE PAS UTILISER CET APPAREIL
ページ4に含まれる内容の要旨
Heritage Bass Guitar Cabinets SVT-410HLF / SVT-810E Introduction Welcome to the world of Ampeg. Whether this is your first experience with Ampeg or you’re a well-seasoned player who’s been around the globe a few times with our gear, you are taking part in a piece of musical history. From here on out, nothing else will sound the same... everything else will pale in comparison. You are one of the lucky few to take part in a new chapter of an American legacy. Ampeg has come home! Eac
ページ5に含まれる内容の要旨
Heritage Bass Guitar Cabinets SVT-410HLF / SVT-810E Eminence Speakers There are some relationships that go hand in hand in the music business. When it comes to building amplifiers and cabinets, nothing is more suited than the relation between Ampeg and Eminence Speakers. Ampeg commissioned Eminence Speakers decades ago to build one of the first 18” speakers used in an Ampeg amplifier. We’ve been calling on Eminence ever since to custom build speakers used in some of our most famou
ページ6に含まれる内容の要旨
Heritage Bass Guitar Cabinets SVT-410HLF / SVT-810E SVT-410HLF Jackplate 4 5 3 6 2 7 IMPEDANCE: 4 OHMS POWER: 500W RMS/1000 PEAK WARNING: THIS SPEAKER IS CAPABLE OF PRODUCING 8 SOUND PRESSURE LEVELS (SPL) WHICH CAN CAUSE 9 HEARING IMPAIRMENTS OR LOSS. EAR PROTECTION 10 IS RECOMMENDED 1 11 12 0 16 I N P U T S -db PIN 1+ = POS(+) LEVEL CONTROL PIN 1- = NEG(-) 1 2 3 1: 1/4” Input / Output Jacks ® 2: Speakon Input / Output Jacks 3: High Frequency Horn Level Control ® Speakon to 1/4”
ページ7に含まれる内容の要旨
Heritage Bass Guitar Cabinets SVT-410HLF / SVT-810E SVT-410HLF Suggested Hookup Diagrams 1 2 In the first example, a speaker cable with 1/4” ends connects from one speaker output of the amplifier to the speaker input of the Ampeg Heritage SVT-410HLF cabinet. An additional cabinet may be connected by attaching another speaker cable from the remaining 1/4” speaker output of the amplifier to a speaker input of the next cabinet. The second example is not as common, but it also works.
ページ8に含まれる内容の要旨
Heritage Bass Guitar Cabinets SVT-410HLF / SVT-810E Heritage SVT-410HLF TECHNICAL SPECIFICATIONS Type 4x10 Bass Enclosure Frequency Response (+/–3 dB) 48 Hz – 18 kHz Usable Low Frequency (–10 dB) 28 Hz RMS Power Handling 500 watts Peak Power Handling 1000 watts Impedance 4 ohms Sensitivity 98 dB SPL 1w/1m Maximum SPL 125 dB Components 4 Custom Designed Eminence 125 watt 10” speakers 1 Eminence HF Driver Size (H x W x D) 24.0 in/610 mm (with feet) x 30.0 in/762 mm
ページ9に含まれる内容の要旨
Heritage Bass Guitar Cabinets SVT-410HLF / SVT-810E SVT-810E Jackplate 1 4X10-DUAL MODE ONLY 4X10-DUAL MODE -or- MONO INPUTS 2 PIN 1+ = POS (+) PIN 1- = NEG (-) POWER HANDLING: 800W RMS (MONO) 400W RMS (DUAL) IMPEDANCE: 4 OHMS (MONO) 8 OHMS (DUAL) 3 1: 1/4” Upper 4x10 Dual Mode Input Jack 2: 1/4” Lower 4x10 Dual Mode or Mono Mode Input / Output Jacks ® 3: Speakon Lower 4x10 Dual Mode or Mono Mode Input / Output Jacks The cabinet operates in Dual Mode whenever a connector is inserte
ページ10に含まれる内容の要旨
Heritage Bass Guitar Cabinets SVT-410HLF / SVT-810E SVT-810E Suggested Hookup Diagrams 1 2 Combined (Mono) Split (Dual) ® In the first example, a speaker cable with 1/4” or Speakon ends connects from the speaker output of the amplifier to the speaker input of the Ampeg Heritage SVT-810E cabinet. In example number two, a speaker cable with 1/4” ends connects from the speaker output of the amplifier to the speaker input of the Ampeg Heritage SVT-810E cabinet. An additional speaker ca
ページ11に含まれる内容の要旨
Heritage Bass Guitar Cabinets SVT-410HLF / SVT-810E Heritage SVT-810E TECHNICAL SPECIFICATIONS Type 8x10 / Dual 4x10 Bass Enclosure Frequency Response (+/–3 dB) 58 Hz – 5 kHz Usable Low Frequency (–10 dB) 40 Hz RMS Power Handling Combined / Mono Mode: 800 watts 8x10 Split / Dual Mode: 400 watts each 4x10 Peak Power Handling Combined / Mono Mode: 1600 watts 8x10 Split / Dual Mode: 800 watts each 4x10 Impedance Combined / Mono Mode: 4 ohms 8x10 Split: 8 ohms each 4x10 Se
ページ12に含まれる内容の要旨
PIN 1+ = POS (+) POWER HANDLING: PIN 1- = NEG (-) 800W RMS (MONO) 400W RMS (DUAL) IMPEDANCE: 4 OHMS (MONO) 8 OHMS (DUAL) INSIDE Owner’s Manual
