ページ1に含まれる内容の要旨
ASTRA 1000RS
AUTOMATIC/MANUAL TRANSMISSION
REMOTE START SYSTEM
PRODUCT MANUAL
ページ2に含まれる内容の要旨
Limited Lifetime Warranty This vehicle remote start system is warranted to the original purchaser, to be free from defects in material and workmanship. The manufacturer will repair or replace at its option, and free of charge for the first twelve (12) months, any part that proves defective in material or workmanship under normal installation, use, and service, provided the product is returned to the manufacturer freight prepaid. After the first 12 month warranty period there will be a maximum
ページ3に含まれる内容の要旨
Table of Contents 1. About Your System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 1 2. Remote Transmitters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 2 Remote Transmitter Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 2 Adding/Replacing Transmitters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ4に含まれる内容の要旨
ページ5に含まれる内容の要旨
About Your System The Astra 1000RS is a state-of-the-art remote starting system with an integrated 2-way paging feature. With proper installation, this system will provide superior protection and performance for many years to come. The Astra 1000RS built-in remote start feature is designed to offer maximum convenience by remote starting your vehicle’s engine, turning on the heater/air conditioner, and then running for a pre-determined time to provide a comfortable environment once you enter y
ページ6に含まれる内容の要旨
Remote Transmitters Remote Transmitter Description LED Button 1 Button 2 Button 5 Button 3 Button 4 The Astra 1000RS is supplied with one 5-button Remote Transmitter used to control system operations. Button 1 Locks the doors and when held for 2 seconds, activates the system’s Car locator feature. Button 2 Unlocks the doors. Button 3 Activates the Auxiliary 1 output. Type of output can be programmed for customization. Button 4 Activates the Remote Start feature. Button 5 is the Page Shift
ページ7に含まれる内容の要旨
3. Press Button 1 on the first transmitter. · The parking lights will flash once. 4. Press Button 1 on the first transmitter again. · The parking lights will flash twice to indicate it has learned the code. 5. Repeat steps 3 and 4 for each transmitter (up to 4). 6. Turn off the ignition key. · The parking lights will flash 3 times. To program 2-way LCD transmitter(s): 1. Turn the ignition key On, Off, On, Off, On, Off and back On· .The parking lights will flash 4 times. 2. Press and hold
ページ8に含まれる内容の要旨
Optional 2-way LCD Remote Transmitter Description Button 1 Button 2 Button 3 Button 4 Button 5 The Astra 1000RS Plus is compatible with the optional 2-way LCD remote transmitter, offering increased range and confirmation of any activated features. Button 1 Locks and Unlocks the system and when held for 2 seconds, activates the system’s Car locator feature. ·Also locks/unlocks the doors when the system is in Valet Mode. Button 2 Activates the Remote Start feature. Button 3 Activa
ページ9に含まれる内容の要旨
LCD Transmitter Battery Replacement Your Galaxy LCD Remote Transmitter uses a 1.5 volt AAA alkaline battery, which will require replacement in time. Depending on the amount of use, the battery may last up to six months before it needs replacement. When the battery needs replacing, the system’s operating range will decrease, the LCD display will show only one of three bars in the battery icon, or the display and sounds may suddenly stop and start as the battery voltage drops below minimum. In or
ページ10に含まれる内容の要旨
Visual Indications · The LCD panel will play a tone if the sounds are enabled or "off" will be displayed if the chirps are disabled. System Armed indicates System Disarmed Trunk Release Engine Run indicates the doors are locked and indicates the doors are the engine is running. Indicates trunk pop. the Starter Kill is active. unlocked and the Starter Kill is off. Door Open Shock Sensor Warn Away Trunk Open N/A N/A. N/A N/A Valet Mode indicates the Unlock indicates the Panic indicates the Car L
ページ11に含まれる内容の要旨
System Operation Remote Locking To Lock the doors: 1. Turn off the ignition. 2. Press Button 1. · The doors will lock. · The parking lights will flash once. · The LED will turn on red, to indicate the doors are locked. 3. 10 seconds after Locking: · The LED will start blinking as a theft deterrent and the Starter Kill will activate. Remote Unlocking To Unlock the doors: Press Button 1 on 2-way transmitter or button 2 on 1-way transmitter. · The doors will unlock. · The parking lights will f
ページ12に含まれる内容の要旨
Remote Start Features Manual/Automatic Transmission Mode Astara 1000RS is designed to be used in vehicles with automatic or manual transmissions. The unit must be set to automatic or manual mode if used in automatic or manual transmissions vehicles. A wire loop extended out of the unit box determines the mode. Cut the loop to put the unit in the automatic transmission mode. Uncut loop keeps the unit in a manual transmission mode. Remote Starting Manual Transmission Mode Normal Mode: With engin
ページ13に含まれる内容の要旨
Shut Down When the the Remote Start feature is active, any of the following actions will shutdown the engine: 1. Pressing Button 4 on 1-Way or Button 2 on 2-Way Transmitter. · After the engine shuts down the doors will lock (programmable) 2. Pressing the Brake Pedal. 3. Opening the Hood. 4. Remote Start Time-Out (completion of the timed run cycle). Quick Stop (Automatic Transmission Only) The Quick Stop Feature allows you to exit the vehicle while keeping the engine running for quick stops.
ページ14に含まれる内容の要旨
Extended Features Ignition Door Locking For added safety, the Ignition Door Locking feature allows vehicles equipped with power door lock systems to automatically lock the doors when the ignition is turned on. If a door is open when the ignition is turned on, the Ignition Door Locking feature is disabled to protect against locking the keys inside the vehicle. Ignition Door Unlocking For added convenience, this feature automatically unlocks the doors after the ignition key is turned off. The I
ページ15に含まれる内容の要旨
System Installation 1. Thoroughly read and become familiar with the installation instructions before beginning the installation. 2. Review system contents: Main Unit One 1-way and one 2-way Transmitters Harnesses • 16-Pin main harness • 3-Pin door lock harness • 2-Pin LED harness • 2-Pin Override Switch harness 3. Verify vehicle is equipped with electronic fuel injection, and starts/idles normally before installation. 4. Determine if vehicle is equipped with a factory theft deterrent sy
ページ16に含まれる内容の要旨
System Wiring 5-Pin Harness Pin 1 ORANGE WIRE: Accessory Output for heater/air conditioner(negative) to activate external relay Pin 2 YELLOW WIRE: Ignition 1 output (negative) to activate external relay. Pin 3 VIOLET WIRE: Starter Output (negative) to activate external relay pin 4 BROWN WIRE: Ignition 2 output (negative) to activate external relay. pin 5 RED WIRE: +12V Power to external relays. 16-Pin Main Harness Pin 1 BLUE WIRE - 1 pulse remote start (-) input. Connect to auxiliary
ページ17に含まれる内容の要旨
independent left and right parking light circuits, diodes must be installed to keep the circuits separate. NOTE: Do not connect the WHITE wire to the vehicle’s headlight circuit. Pin 16 RED WIRE: Module Power Input (+). Connect to a constant source of +12V. 2-Pin Blue Connector: Valet switch port. Mount switch where it is accessible from the driver’s position. 2-Pin Red Connector: LED port. Mount LED where it may be easily seen from either side of the vehicle. 3-Pin White Door Lock Connector:
ページ18に含まれる内容の要旨
Jumper Settings Jumper Selection Carefully separate the top and bottom halves of the main unit case. Once the cover is removed, the parking light polarity jumper will be visible next to the parking light relay. Set the jumper for the correct polarity output as described below, then reassembly the main unit case. Parking Light Output. Selects the polarity (+/-) for the output of the on-board Parking Light relay. Left Pin + Center Pin = positive Right Pin + Center Pin = negative default se
ページ19に含まれる内容の要旨
System Programming Entering System Programming To enter System Programming: 1. Turn on ignition. 2. Within 5 seconds, press the valet switch 5 times. · The parking lights will flash three (3) times indicating you have entered Programming. 3. Press the valet switch the number times equal to the System Parameter you want to change. · The parking lights will flash each time the valet switch is pressed. 4. Within 5 seconds, press the transmitter button corresponding to the desired operating mode fo
ページ20に含まれる内容の要旨
Momentary operation provides an output for as long as the transmitter button is pressed. Timed operation provides an output that turns on for 10 seconds each time the transmitter button is pressed. If the button is pressed again during the 10 seconds, the output will turn off. Latched operation provides an output that turns on when the transmitter button is pressed and remains on until the transmitter button is pressed again. 6. Unlock with Aux 1. Selects whether the doors should unlock when y
