ページ1に含まれる内容の要旨
TM
World-Class Auto Security
Falcon
Owner's Manual
ページ2に含まれる内容の要旨
Table of Contents Standard Features of the Falcon II . . . . . . . . . . . . . . . 3 Your Premier 4-button/12-channel remote controls . . . . . 6 Optional 4-button/12-channel ACG remotes . . . . . . . . . 7 Anti-CodeGrabbing (ACG) capability . . . . . . . . . . . . . 8 AutoArming . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 AutoArming enable/disable . . . . . . . . . . . . . . . . . 9 AutoArm & Lock . .
ページ3に含まれる内容の要旨
Table of Contents (cont.) How to interpret the chirps and indicator light flashes . . . 10 FACT — False Alarm Control and Test . . . . . . . . . . . . 10 Smart boot release option . . . . . . . . . . . . . . . . . . 11 Smart prior intrusion attempt alert . . . . . . . . . . . . . . 11 Smart AutoTesting . . . . . . . . . . . . . . . . . . . . . . . 11 Automatic malfunction bypass . . . . . . . . . . . . . . . 11
ページ4に含まれる内容の要旨
Standard Features of the Falcon II ✔ Lifetime Warranty — Clifford Electronics will repair or replace the control unit and remote controls free of charge for as long as you own the vehicle (see the warranty card for full details). ✔ FACT — False Alarm Control and Test — One of many patented Clifford innovations, FACT absolutely, positively ends recurring false alarms. ✔ A Pair of Premier 4-Button/12-Channel Remote Controls —For fingertip command from a distance with a 4.3 billion code universe f
ページ5に含まれる内容の要旨
Standard Features of the Falcon II (cont.) ✔ Remote Controlled Valet Mode — A press of a button on the remote control allows you to enter or exit valet mode. Indicator light flashes visually confirm valet mode entry and exit. ✔ Remote Controlled Courtesy Lighting — For your safety and convenience, when you remotely disarm your Falcon II, the interior lights turn on and stay on until you start the engine or for 30 seconds, whichever occurs first. ✔ Built-In Indicator Light Flasher — Visually conf
ページ6に含まれる内容の要旨
Standard Features of the Falcon II (cont.) ✔ User-Selectable AutoArming— Automatically arms itself “passively” if you forget to arm it with the remote control. AutoArming Enable/Disable — Enable or disable the AutoArming feature with just a few flicks of a switch. AutoArm & Lock — If you wish, you may set the system to automatically lock the doors every time it AutoArms. Instant AutoArm Bypass — Just two quick turns of the ignition switch will bypass the AutoArming feature for one cycle — perfec
ページ7に含まれる内容の要旨
Your Premier 4-Button/12-Channel Remote Controls The Premier 4-button/12-channel remote controls are miniature radio transmitters. Obstructions, interference or a weak remote control battery will reduce the range. Your remote control is the key to your Falcon II. You will use it to arm or disarm the system, lock or unlock the doors, activate its panic feature or control options such as a remote boot release or IntelliStart remote engine starter. With the red side switch in the UP position, butto
ページ8に含まれる内容の要旨
WHAT ABOUT Channels 5 of the optional 4-button/12-channel ACG remote CHANNEL 5 . . . . . . . . control is used to remotely engage or disengage the system’s valet mode. See pages 9 and 10 for details. Optional 4-button/12-channel ACG remote controls The optional 4-button/12-channel remote control incorporates Anti-CodeGrabbing (ACG) technology for the ultimate protection against “code-grabbing” devices (see page 13). The optional ACG remote control can individually command up to 12 different syst
ページ9に含まれる内容の要旨
Anti-CodeGrabbing (ACG) Capability Clifford Electronics’ optional 4-button/12-channel Anti-CodeGrabbing (ACG) remote controls protect you and your automobile from the most effective and onerous car stealing device ever used by car thieves — a code-grabber. Code-grabbers literally record, from hundreds of meters away, the code sent by your car alarm remote control. Then the thief simply plays back the code when you’re gone, instantly disarming the alarm and unlocking the doors. Your Falcon II has
ページ10に含まれる内容の要旨
Valet mode Whenever the system is put in valet mode, all of the system’s security features are switched off. At various times, you will need to turn the system off. For instance, when having your car serviced, washed or parked by a valet. NOTE: If you temporarily lose the use of your remote controls, you can disarm the system by enabling valet mode. To enable valet mode 1. Turn the ignition switch to its “ON” position or start the engine. 2. Flip the valet switch. The system’s LED will glow co
ページ11に含まれる内容の要旨
How to interpret the LED status indicator The LED on your car’s dashboard or console will inform you of the system status: LED Condition Meaning Off System is disarmed and in normal operating mode (i.e., valet mode is off) On Valet mode is on, the vehicle can be driven or serviced without having to disarm Flashing System is armed and protecting your vehicle High-output siren Your Falcon II siren sounds whenever the system detects an intrusion attempt. It also provides these features: Long-term
ページ12に含まれる内容の要旨
Smart boot release option If this option was installed, you may use button II to remotely pop the boot. Your system has a built-in electronic interlock to prevent unintentional activation of the remote boot release when you drive or when the system is armed. Smart prior intrusion attempt alert When you remotely disarm, if you hear 3 chirps instead of the usual one chirp it means that a trigger or sensor was activated in your absence. When you turn on the ignition, the LED will flash 1-3 times,
ページ13に含まれる内容の要旨
Selectable starter/ignition interrupt At the time of installation, you can select whether Falcon II interrupts the starter or ignition line. In addition, the interrupt will be set in either Fault-Proof mode, which lets you start the engine even in the unlikely event of a complete system failure, or Super-Security mode that ensures a thief won’t be able to start the engine even if he cuts all the wires or finds the system control unit and disconnects it. Changing the mode requires a minor relay w
ページ14に含まれる内容の要旨
User-selectable features Your Falcon II vehicle security system allows you to set many of its features to your own personal preferences. We have made the programming procedures very simple: to make a change, you just flick the valet switch a few times. The system comes from the factory with all of its features pre-programmed as noted in the table below and on the next page. To change any of the settings, use the following procedure. To restore the feature to its factory setting, just repeat the
ページ15に含まれる内容の要旨
# of Program Factory Secondary Feature flicks and completion Result setting action chirps confirmation Add a New Remote to Buttons III/channel 3 code Channel 3 15 — Press remote control button III 3 chirps of the new remote control (silent has been memorised arm/disarm) Add a New Remote to Button IV/channel 4 code Channel 4 — 16 Press remote control button IV 4 chirps of the new remote control (optional has been memorised remote accessory) Add a New Remote to Channel 5/remote valet code Channel
ページ16に含まれる内容の要旨
How to erase the codes of lost or stolen remote controls If one of your remote controls is ever lost or stolen, you can erase its digital codes from the system memory to make sure that the missing remote control can never be used to disarm your system. To do so, use the “Erase all channels” feature (see User-selectable features on pages 13-14). This will clear all remote control codes from the system memory. Then simply program each remaining and/or replacement remote control as noted in the Add
