ページ1に含まれる内容の要旨
TM
World-Class Auto Security
ページ2に含まれる内容の要旨
Table of Contents Standard Features of the ACE 300 . . . . . . . . . . . . . . . . . . . 3 Your 4-button/12-channel remote controls . . . . . . . . . . . . . . 6 How to use your keychain remote control . . . . . . . . . . . . . . . . 6 What each button/channel does . . . . . . . . . . . . . . . . . . . 7 Anti-CodeGrabbing (ACG) with Random Code Encryption . . . . 8 Enhanced AutoArming™ . . . . . . . . . . . . . . .
ページ3に含まれる内容の要旨
Table of Contents (cont.) Smart AutoTesting™ . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Specific malfunction identification . . . . . . . . . . . . . . . . . . . . . 11 Automatic malfunction bypass . . . . . . . . . . . . . . . . . . . . 11 TotalRecall™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Smart prior intrusion attempt alert . . . . . . . . . . . . .
ページ4に含まれる内容の要旨
Standard Features of the ACE 300 ✔ Lifetime Warranty — For as long as you own the vehicle, Clifford will repair or replace the control unit and remote controls free of charge (see warranty card for full details). ✔ FACT™—False Alarm Control and Test — One of many patented Clifford innovations, FACT absolutely, positively ends recurring false alarms. ✔ A Pair of 4-Button/12-Channel Remote Controls — Fingertip command from a typical range of 100 feet. ✔ Anti-CodeGrabbing™ (ACG) with Random Code E
ページ5に含まれる内容の要旨
Standard Features of the ACE 300 (cont.) ✔ Remote Controlled Courtesy Lighting — For your personal safety and convenience, when you remotely disarm your ACE 300, the interior lights turn on and stay on until you start the engine or 30 seconds, whichever occurs first. ✔ Dual-Mode Chirp Silencing— Your choice of either long-term chirp silencing or remote controlled chirp muting whenever you wish. ✔ Enhanced User-Selectable AutoArming™— Automatically arms itself “passively” if you forget. May quali
ページ6に含まれる内容の要旨
Standard Features of the ACE 300 (cont.) ✔ TotalRecall™— ACE 300’s memory stores the identity of the last trigger or sensor activated. This provides an invaluable diagnostic means, since, whenever you wish, the system will visually identify the last activated trigger or sensor. ✔ Patented Smart Prior Intrusion Attempt Alert — When you return to your vehicle and remotely disarm your ACE 300, a special chirp and parking light flash sequence will audibly and visually alert you from a distance if an
ページ7に含まれる内容の要旨
Your 4-button/12-channel remote controls The 4-button/12-channel remote controls are ultra-sophisticated miniature radio transmitters powered by a tiny 12-volt battery. Range is up to 100 feet. A weak remote control battery will reduce range. Electrical interference and even sunspots can interrupt the signal from your remote control to the system. If this happens, repeatedly press the remote control button (this works better than holding the button down). The 4-button/12-channel remote control i
ページ8に含まれる内容の要旨
What each button/channel does Your ACE 300 remote controls come pre-programmed so that certain channels command certain functions. If you wish, you can actually assign any channel to any function (see pages 13-14). The following chart indicates what each remote control channel number does, and how to transmit each channel number. Factory settings of the 12 remote control channels Transmitting Press the How Press channel Causes the system to: LevelShift many button number: button? times? number 1
ページ9に含まれる内容の要旨
TO ACTIVATE Press button 1 (channel 1) for 3 seconds. The parking lights THE PANIC will flash repeatedly and the siren will blare for 30 seconds or FEATURE . . . . . . . . . . until you press button 1 again to turn it off. If the ignition is on (indicating you are in the car), the doors will automatically lock to prevent an assailant from entering. If the ignition is off, the doors will unlock, allowing you to enter immediately without fumbling with your keys. TO REMOTELY Button 2 (channel 2)
ページ10に含まれる内容の要旨
Enhanced AutoArming™ If this feature is enabled and you forget to remotely arm, ACE 300 automatically arms itself 30 seconds after the doors are closed. For your convenience, if you re-open any door(s) within the 30-second countdown, AutoArming will restart from the beginning once all doors are closed. ACE 300 has these additional AutoArming features: AutoArming enable/disable: If you prefer, you may deactivate or reactivate the AutoArming feature. See User-selectable features on pages 13-14. Au
ページ11に含まれる内容の要旨
How to interpret the chirps and parking light flashes When you use the remote control, the system responds with chirps and parking light flashes. These chirp/flash acknowledgments mean: Chirps/flashes Meaning 1 Your system is disarmed or you have remotely exited valet mode (see page 9) 2 Your system is armed or you have remotely engaged valet mode (see page 9) 2 and then 4 Armed but a door is open or one of the sensors is malfunctioning (see page 11) 3 Disarmed but there was an intrusion attempt
ページ12に含まれる内容の要旨
Smart AutoTesting™ Each time you remotely arm your ACE 300, it automatically performs an extensive test of all system triggers and sensors. If the hood or trunk is open when you remotely arm, the system will immediately alert you of the problem by sounding 4 chirps and 4 parking light flashes instead of the usual 2 and 2 (simply disarm, shut the hood or trunk and re-arm to reactivate monitoring of that trigger point). If a door is ajar or if a sensor is malfunctioning, you will receive the usua
ページ13に含まれる内容の要旨
Smart prior intrusion attempt alert If you hear three chirps when you remotely disarm, it means that a trigger or sensor was activated in your absence. When you enter the vehicle and turn on the ignition (or start the engine), the LED will blink 1–3 times, pause, then repeat the blink cycle 4 more times. Count the number of blinks in one cycle and refer to the chart on page 11. Piezo Sensor The Piezo Sensor that detects intrusion-related vibrations and impacts. FACT™— False Alarm Control and Te
ページ14に含まれる内容の要旨
User-selectable features Your ACE 300 vehicle security system allows you to set many of its features to your own personal preferences. We have made the programming procedures very simple: to make a change, you just flick the valet switch a few times. The system comes from the factory with all of its features pre-programmed as noted in the table below and on the next page. To change any of the settings, use the following procedure. To restore the feature to its factory setting, just repeat the pr
ページ15に含まれる内容の要旨
# of Program Factory Secondary Feature flicks & completion Result setting action chirps confirmation Add a new remote to Button 3/channel 3 code of channel 3 15 — Press remote control button 3 3 chirps the new remote control (silent has been memorized arm/disarm) Add a new remote to Button 4/channel 4 code channel 4 16 — Press remote control button 4 4 chirps of the new remote control (optional has been memorized remote accessory) Add a new remote to Press the side LevelShift Button 1/channel 5
ページ16に含まれる内容の要旨
How to erase the codes of lost or stolen remote controls If one of your remote controls is ever lost or stolen, you can erase its digital codes from the system memory to make sure that the missing remote control can never be used to disarm your system. To do so, use the “Erase all channels” feature (see User-selectable features on pages 13-14). This will clear all remote control codes from the system memory. Then simply program each remaining and/or replacement remote control as noted in the Add
