ページ1に含まれる内容の要旨
®
The company behind Avital Auto Security Systems
is Directed.
Since its inception, Directed has had one purpose,
to provide consumers with the finest vehicle security
products and accessories available. The recipient of
IT's YOUR CAR - CONTROL IT FROM THE sTART
nearly 100 patents and Innovations Awards in the field
of advanced electronic technology.
Quality Directed products are sold and
serviced throughout North America and around
the world.
Call (800) 876-0800 for more information a
ページ2に含まれる内容の要旨
Contents System Maintenance ............................................................................................ 2 Battery Replacement ............................................................................. 2 2-Way Remote Control ........................................................................................ 3 Status Screen Icons .............................................................................................. 4 Basic Commands .................................
ページ3に含まれる内容の要旨
System Maintenance The 7352L remote is powered by a 1.5V AAA battery. The battery level indicator has three indicators that serve as a visual indication of battery charge. When the battery reaches a low charge level that requires replacement, the remote generates a single notification chirp, and the battery level indicator flashes continuously. Battery Replacement Gently pull the battery cover release tab, then slide the door down to expose the battery and remove the expired battery. Place th
ページ4に含まれる内容の要旨
2-Way Remote Control Antenna Function Button Display Command Buttons Feature Description Internal Antenna Used for transmitting and receiving information Display Text field - the upper portion of display - shows the Clock and Remote State Runtime. Status screen - the lower portion of the display contains status icons for the System, Remote Start and Remote Control. Command buttons (4) Used to perform locking, unlocking, auxiliary channel and remote start commands Function button Used to t
ページ5に含まれる内容の要旨
Status Screen Icons 4 3 2 1 AM 24 PM 5 23 6 22 A 7 21 SAVE 8 20 9 10 19 11 18 INHIBIT 12 17 13 16 14 15 © 2013 Directed. All rights reserved. 4
ページ6に含まれる内容の要旨
The following table describes the status screen icons. Item Description 1 No function 2 Numeric Display 3 AM/PM Indicator 4 Alarm Clock Mode Indicator 5 No function 6 Transmission Indication 7 Transmit Range Indicator 8 Power Saver Mode Indicator 9 Vibrate/Beep Mode Indicator 10 No function 11 Vehicle Page Mode Indicator 12 No function 13 Hood/Trunk Open Indicator 14 Parking Light Indicator 15 Door Open Indicator 16 Remote Start Indicator 17 Hood/Trunk Open Indicator 18 Remote Start Safety Shut
ページ7に含まれる内容の要旨
Basic Commands Lock Press and release The doors lock, the horn sounds*and parking lights flash. Panic and Car Finder* Press and hold The doors lock and after a short pause, the vehicle’s panic fea- ture is activated. Unlock Press and release The doors unlock and the horn sounds* and parking lights flash twice. Turns panic/car finder off if on. AUX Press and hold For optional function (trunk release) Activates the Aux output, such as trunk release, power lift gate, or an expansion function t
ページ8に含まれる内容の要旨
LCD backlighting Press and release LCD backlighting turns on. To enter adjustment mode Press and hold When held for more than five seconds the remote enters adjust- ment mode allowing the setting of the clock, timer mode, and audible melody selection. For more information, see Remote Op- eration section. Advanced Commands Time/alarm clock Press and buttons simultaneously Turns On/Off the alarm clock. The remote control plays an ascending melody when On and a descending melody when Off. Pa
ページ9に含まれる内容の要旨
Advanced Remote Control Commands Refer to the Quick Reference Guide for more information on advanced remote start commands that are specific to each vehicle. Remote Operation The remote start system operates at 434 MHz and incorporates Di- rected’s proprietary A.S.K. out-board two-way remote. The high fre- quency combined with Binary Data communication achieves superior range with two-way communication. Paging features The control module sends a page to the remote as confirmation of a receive
ページ10に含まれる内容の要旨
Setting Features on the LCD Remote To enter the adjustment settings press and hold the for five sec- onds, the remote will sound twice confirming entry into the adjustment menu. Once in the adjustment menu, press and release the to advance to the desired feature. The number in parenthesis indicates the number of times the has to be pressed and released to access that feature. 1. Alarm clock set a. hour (2) b. minute (3) 2. Alarm clock music (4) 3. Alarm Clock On/Off (5) 4. Timer countdown a
ページ11に含まれる内容の要旨
Remote and System Operations Panic Mode* if you are threatened in or near your vehicle, you can attract attention by triggering the system with your remote control. Press and hold for two seconds, the vehicle’s factory panic fea- ture is actiavted (if available). To stop panic made at any time, press . *Feature is vehicle specific and availability may vary by model. Refer to installation center for more information. Remote start This feature allows you to remotely start and run your vehicle
ページ12に含まれる内容の要旨
To remote start the vehicle: Press on the remote control once. The parking lights flash to confirm that the vehicle will attempt to start. Once the vehicle has started, it runs for the pre- pro gram- med period of time* or until a shutdown input is trig gered. Warning! It is unsafe to operate a vehicle’s motor in a garage or other closed off area. Breathing the ex haust from the ve- hicle is hazardous to your health. Never activate the remote start in an enclosed space. *Runtime adjustment
ページ13に含まれる内容の要旨
Valet take-over (optional) The Valet Take-Over feature allows the vehicle to remain running after the key has been removed from the ignition. This feature is useful for occasions when you wish to exit and lock the vehicle for short periods of time, but would like to leave the motor running and the climate controls on. To perform Valet Take-Over: 1. Before turning off the engine, press and release on the remote control (or press and release the optional momentary switch). Then wait five se
ページ14に含まれる内容の要旨
Shut down inputs This security system uses several inputs to shut down the remote start operation of the motor or prevent remote start if certain inputs are ac- tive. The two most important are hood and brake inputs. The hood input will prevent the motor from starting, as well as shut it down, any time the hood is opened. The brake pedal will shut down the motor at any time during remote start operation, as well as preventing the remote start from activating while it is being pressed. Addit
ページ15に含まれる内容の要旨
1-Way Companion Remote Control 3 2 1 4 5 6 Feature Description 1 Press for one second to lock. 2 Internal antenna active when transmitting information. Transmit LED used for transmitting information 3 4 Press for one second to unlock. 5 Press and release to activate remote start. 6 Press and hold for 2 seconds to activate optional trunk release or other optional accessory. © 2013 Directed. All rights reserved. 14
ページ16に含まれる内容の要旨
Using the 1-Way Companion Remote The companion 1-way remote (7143L) commands the system features as shown in the previous table, but without the message display of the 7352L remote. Parking light flashes is used to indicate that a command has been received and activated as described in the Basic command sections. Battery Information The 1-way companion remote is powered by one 3V coin cell lithium battery (PN CR-2032) that will last approximately one year under normal use. Battery Replacem
ページ17に含まれる内容の要旨
Government Regulations This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection agai
ページ18に含まれる内容の要旨
Warning! Safety First Please read the safety warnings below before proceeding. Improper use of the product may be dangerous or illegal. Installation Due to the complexity of this system, installation of this product must only be performed by an authorized Directed dealer. If you have any questions, ask your retailer or contact Directed directly at 1-800-753-0600 (US) or1-800-361-7271 (Canada). Remote Start Capable When properly installed, this system can start the vehicle via a command signal
ページ19に含まれる内容の要旨
DISCONNECT THE INSTALLED REMOTE START MODULE. DIRECTED WILL NOT BE HELD RESPONSIBLE OR PAY FOR INSTALLATION OR REINSTALLATION COSTS. This product is designed for fuel injected vehicles only. Interference All radio devices are subject to interference which could affect proper performance. Upgrades Any upgrades to this product must be performed by an authorized Directed dealer. Do not attempt to perform any unauthorized modifications to this product. Water/Heat Resistance This product is not des
ページ20に含まれる内容の要旨
Limited Lifetime Consumer Warranty Directed Electronics. (“Directed”) promises to the original purchaser to repair or replace (at Directed’s election) with a comparable reconditioned model any Directed unit (hereaf- ter the “unit”), excluding without limitation the siren, the remote transmitters, the associated sensors and accessories, which proves to be defective in workmanship or material under reasonable use during the lifetime of the vehicle provided the following conditions are met: the
