ページ1に含まれる内容の要旨
Avital 3300
Owner's Guide
ページ2に含まれる内容の要旨
Limited Lifetime Consumer Warranty For a period of one calendar year from the date of purchase of this auto-security device, Directed Electronics, Inc. promises to the ORIGINAL PURCHASER to repair or replace (with a comparable reconditioned model), free of cost, any electronic control module which proves to be defective in workmanship or material under normal use, SO LONG AS THE SYSTEM WAS SOLD, INSTALLED, AND SERVICED BY A PROFESSIONAL AUTO INSTALLER, AND REMAINS IN THE CAR IN WHICH THE SYST
ページ3に含まれる内容の要旨
TO THE MAXIMUM EXTENT ALLOWED BY LAW, ANY AND ALL WARRANTIES ARE EXCLUD- ED BY THE MANUFACTURER AND EACH ENTITY PARTICIPATING IN THE STREAM OF COM- MERCE THEREWITH. THIS EXCLUSION INCLUDES BUT IS NOT LIMITED TO THE EXCLUSION OF ANY AND ALL WARRANTY OF MERCHANTABILITY AND/OR ANY AND ALL WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND/OR ANY AND ALL WARRANTY OF NON- INFRINGEMENT OF PATENTS, IN THE UNITED STATES OF AMERICA AND/OR ABROAD. NEITHER THE MANUFACTURER OR ANY ENTITIES CONNECTED THEREWITH
ページ4に含まれる内容の要旨
and is limited to one claim. This vehicle theft protection guarantee is valid only for the theft of the entire vehicle and specifically excludes any other considerations, including, but not limited to, damage caused to the vehicle, theft of parts, contents or any other consequential damages. Once Avital Technologies verifies that all the above listed terms and conditions have been met, a check for the insurance deductible (up to $2,500) will be mailed within thirty (30) days. Make sure you have
ページ5に含まれる内容の要旨
Table of Contents Limited Lifetime Consumer Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i Standard Transmitter Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 What Is Included. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Important Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 System Maintenance . . . . . . . . . . . . . . . . . . . .
ページ6に含まれる内容の要旨
Standard Transmitter Configuration 2 2000 Directed Electronics, Inc. ©
ページ7に含まれる内容の要旨
G3300 7-01.qxd 8/7/2001 8:08 AM Page 3 What is Included A control module An HF Plus receiver/antenna Two four-button transmitters ™ ® A Stinger DoubleGuard two-stage shock sensor ™ ™ A Revenger Soft Chirp six-tone programmable siren A red status LED indicator light ® A push-button Valet switch Your warranty registration ® FailSafe Starter Kill A shut-down toggle switch Important Information Congratulations on the purchase of your remote start keyless entry system. Due t
ページ8に含まれる内容の要旨
G3300 7-01.qxd 8/7/2001 8:08 AM Page 4 System Maintenance The system requires no specific maintenance. Your remote is pow- ered by a small, lightweight 3-volt lithium battery that will last approximately one year under normal use. When the battery begins to weaken, operating range will be reduced and the LED on the remote will dim. Your Warranty Your warranty registration must be completely filled out and returned within 10 days of purchase. Your product warranty will not be validated if you
ページ9に含まれる内容の要旨
Caution This product is designed for fuel injected, automatic transmission vehicles only. Use of this remote start system in a standard transmission vehicle is dangerous and contrary the product's intended use. Transmitter Functions The receiver uses a computer-based Learn Routine to learn the transmitter buttons. This makes it possible to assign any remote transmitter button to any receiver function. The transmitter ini- tially comes programmed with Standard Configuration, but may also be custo
ページ10に含まれる内容の要旨
Button ™ Silent Mode and an optional auxiliary function are controlled by ™ pressing . Silent Mode works by pressing for less than one second. An optional auxiliary function, such as trunk release, is controlled by pressing and holding for 1.5 seconds. The auxiliary output controls _____________________________. Button The panic function is controlled by pressing and holding for 1 second. and Buttons The remote start function of your system is controlled by pressing these buttons simultaneously
ページ11に含まれる内容の要旨
Using Your System Warning! Safety First The following safety warnings must be observed at all times: Due to the complexity of this system, installation of this product must only be performed by an authorized DEI dealer. When properly installed, this system can start the vehicle via a command signal from the remote control transmitter. Therefore, never operate the system in an enclosed area or partially enclosed area without ventilation (such as a garage). When parking in an enclosed or part
ページ12に含まれる内容の要旨
cle in gear, and (2) Never remotely start the vehicle with the keys in the ignition. The user must also have the neutral safe- ty feature of the vehicle periodically checked, wherein the vehicle must not remotely start while the car is in gear. This testing should be performed by an authorized DEI dealer in accordance with the Safety Check outlined in the product installation guide. If the vehicle starts in gear, cease remote start operation immediately and consult with the authorized DEI dealer
ページ13に含まれる内容の要旨
Arming You can arm the system by pressing of your transmitter for one second. When the system arms, you will hear a short siren sound, or chirp, and see the parking lights flash once. If the power door locks are controlled by the system, the doors will also lock. While the system is armed, the status LED will flash approximately twice per second, indicating that the system is actively protecting your vehicle. If you hear a second chirp after arming and note that the status LED is flashing in gro
ページ14に含まれる内容の要旨
Heavy impacts trip a Triggered Sequence. The sequence con- sists of the siren sounding continuously and the parking lights flashing for a pre-programmed period, which can range in duration from 1 to 180 seconds. If a door is opened, the system will immediately start chirp- ing the siren and flashing the parking lights. Three seconds later, the siren output changes to a continuous blast. This progressive response gives you time to disarm the system with your transmitter if you inadvertently
ページ15に含まれる内容の要旨
Pressing a second time within five seconds: The siren chirps twice followed by a long chirp. Zone 2 is now bypassed. Pressing a third time within five seconds: The siren chirps three times followed by a long chirp. Zone 4 is now bypassed. Pressing a fourth time within five seconds: The siren chirps four times followed by a long chirp. Zones 2 and 4 are now bypassed. Pressing a fifth time within five seconds: The siren chirps five times followed by a long chirp. All input zones, except
ページ16に含まれる内容の要旨
Disarming To turn off, or disarm the security system, press again. You will hear two chirps, and the parking lights will flash twice. If the power locks are controlled by the system, the doors will also unlock. The siren chirping either four or five times when disarming indicates Tamper Alert, which is described in the Diagnostics Section of this guide. High Security Disarm Your security system includes a High Security Disarm feature. After 6 seconds of trigger sequence, using the transmitter to
ページ17に含まれる内容の要旨
Disarming Without a Transmitter If your remote transmitter is lost or damaged, you can manually disarm your vehicle security system. To disarm the system without a transmitter, you must have the vehicle's ignition key and know ® where the Valet switch is located. Be sure to check with your installer at the time of installation for both the location and the ® preset response (1-5 presses) of the Valet switch. To disarm the security system, turn the ignition key on and ® press the Valet switch th
ページ18に含まれる内容の要旨
® NOTE: The Warn Away Response to lighter impacts is bypassed if the system is armed using the Silent Mode. This ensures that the siren does not chirp in an environment where you don't want chirps to be emitted. The system is still capable of being triggered by heavier impacts; only ® the Warn Away Response generated by light impacts is bypassed. Panic Mode If you are threatened in or near your vehicle, you can attract attention by triggering the system with your transmitter! Just press and hold
ページ19に含まれる内容の要旨
The status LED will light steadily to indicate that you have ® ® entered Valet Mode and will turn off when you have exited Valet Mode. Remote Valet ® You can also activate Valet Mode using the remote transmitter: 1. Open any vehicle door. 2. Press . 3. Press . 4. Press again. ® The status LED will light solid if you are entering Valet Mode and ® will turn off if you are exiting Valet Mode. Remote Start This feature allows you to remotely start and run your vehicle for a programmable period of
ページ20に含まれる内容の要旨
as soon as the parking lights flash. If the buttons are pressed longer than two seconds, the remote start sequence will stop. About three seconds after the parking lights flash, the system will engage the starter until the vehicle is successfully running. If the motor is not running after six seconds, the system will stop crank- ing the starter. After three seconds, the system will attempt to start the motor again. If your motor is not running after three attempts, the system will stop the remot
