ページ1に含まれる内容の要旨
INSTALLATION MANUAL
P-105
AM/FM/MPX RADIO
WITH COMPACT DISC PLAYER,
CD CHANGER CONTROLS
AND QUARTZ CLOCK
ページ2に含まれる内容の要旨
INSTALLATION INSTRUCTIONS This unit is designed for installation in GM and Chrysler cars, trucks, and vans with a 1-1/2 DIN radio opening. In some cases, a special installation kit will be required to mount the radio to the dashboard. These kits are available at electronics supply stores and car stereo specialty shops. Always check the kit application before purchasing to make sure the kit works with your vehicle. If you need a kit but cannot find it available, call our toll-free “HELP” line
ページ3に含まれる内容の要旨
WIRING COLOR CODES FUNCTION COLOR + 12 V Acc/Ignition Red + 12 V Battery/Memory Yellow Ground Black Dimmer Orange LF + Speaker White LF - Speaker White/Black LR + Speaker Green LR - Speaker Green/Black RF + Speaker Gray RF - Speaker Gray/Black RR + Speaker Violet RR - Speaker Violet/Black TYPICAL GM APPLICATION (See Figure 1.) Radio Preparation: NOTE: For GM car installations, use the GM Hardware Kit, Part Number 150-1343, which is furnished with the radio. 1. Match quickie bolt locations on th
ページ4に含まれる内容の要旨
WIRING DIAGRAM-TYPICAL INSTALLATION FOR GM (Figure 1) -4- LONG QUICKIE BOLT ITEM #3 REAR VIEW VEHICLE DASH NOTE: GM VEHICLES 1992 AND UP CD CHANGER WILL REQUIRE AN ANTENNA CONNECTOR ADAPTER CABLE TO CONVERT THE VEHICLE SIDE MINI CONNECTOR TO A STANDARD CONNECTOR 14 PIN PWR/SPKR CONNECTOR GM MINI- BARBLESS ANTENNA CABLE OR RCA CABLES ANTENNA SOCKET REAR BUSHING FACTORY RADIO FLANGE NUT ITEM #4 SPLICE WIRES FACTORY BRACKET VEHICLE VEHICLE SIDE OUTER DASH TRIM P-105 RADIO RADIO HARNESS GM WIRING
ページ5に含まれる内容の要旨
TYPICAL CHRYSLER APPLICATION (See Figure 2.) Radio Preparation: NOTE: For Chrysler car installations, use the Chrysler Hardware Kit, Part Number 150-1344, which is furnished with the radio. 1. Select two of the four mounting tabs provided and match the radio mounting style of the vehicle as shown in Figures 3, 4 and 5. NOTE: The tab number is stamped on the bottom of the tab. 2. Attach the mounting tabs to the radio chassis with the four small Phillips-head screws provided ( Item # 9). 3. Atta
ページ6に含まれる内容の要旨
TYPICAL INSTALLATION FOR CHRYSLER (Figure 2) -6- REAR VIEW CD CHANGER CONNECTOR ANTENNA CABLE VEHICLE DASH 14 PIN PWR/SPKR CONNECTOR FLANGE NUT ITEM #4 RCA CABLES (supplied) VEHICLE SIDE ANTENNA LONG QUICKIE SOCKET GROUNDING STRAP BOLT ITEM #3 SPLICE WIRES VEHICLE SIDE RADIO HARNESS P-105 RADIO CHRYSLER WIRING HARNESS ADAPTER VEHICLE (PURCHASED SEPARATELY) P-105 OUTER DASH TRIM WIRING HARNESS EXISTING MOUNTING HARDWARE OR 10mm SCREWS CHRYSLER APPLICATION MOUNTING TABS AND HARDWARE (See Figur
ページ7に含まれる内容の要旨
TAB #2 Figure 3 TAB #1 TAB #2 TAB #4 Figure 4 TAB #3 Figure 5 TAB #2 -7-
ページ8に含まれる内容の要旨
© 2001 Audiovox Electronics Corp., Hauppauge, NY 11788 128-5914A
