ページ1に含まれる内容の要旨
TABLE OF CONTENTS
SECTION PAGE
1
INTRODUCTION .............................................................3
1
2
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ..............................7
2
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE ..............................69
3
4
INSTRUMENT PANEL AND CONTROLS .........................................159
4
5
STARTING AND OPERATING .................................................215
5
6
WHAT TO DO IN EMERGENCIES ..........................................
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
INTRODUCTION 1 CONTENTS Introduction ........................... 4 Vehicle Identification Number ............... 5 How To Use This Manual .................. 4 Vehicle Modifications / Alterations ........... 6 Warnings And Cautions ................... 5
ページ4に含まれる内容の要旨
4 INTRODUCTION INTRODUCTION WARNING! This manual has been prepared with the assistance of service and engineering specialists to acquaint you with Engine exhaust, some of its constituents, and certain the operation and maintenance of your new vehicle. It is vehicle components contain or emit chemicals supplemented by a Warranty Information Booklet and known to the State of California to cause cancer and various customer oriented documents. You are urged to birthdefectsorotherreproductiveharm.Ina
ページ5に含まれる内容の要旨
INTRODUCTION 5 WARNINGS AND CAUTIONS This manual contains WARNINGS against operating 1 procedures which could result in an accident or bodily injury. It also contains CAUTIONS against procedures which could result in damage to your vehicle. If you do not read this entire manual you may miss important information. Observe all Warnings and Cautions. VEHICLE IDENTIFICATION NUMBER The vehicle identification number (VIN) is found on a stamped plate located on the left front corner of the instrument p
ページ6に含まれる内容の要旨
6 INTRODUCTION VEHICLE MODIFICATIONS / ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
ページ7に含まれる内容の要旨
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2 CONTENTS A Word About Your Keys .................. 9 ▫ Power Door Locks .....................14 ▫ Key-In-Ignition Reminder ................ 9 ▫ Child Protection Door Lock ...............17 ▫ Sentry Key — If Equipped ................ 9 Remote Keyless Entry .....................19 Ignition And Steering Lock .................12 ▫ To Unlock The Doors And Liftgate ..........19 ▫ Ignition Accessory Delay Feature ...........13 ▫ To Lock The Doors And
ページ8に含まれる内容の要旨
8 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Security Alarm System — If Equipped .........24 ▫ Enhanced Driver Seat Belt Reminder System (BeltAlert) ...........................36 ▫ To Set The Alarm ......................25 ▫ Seat Belts And Pregnant Women ............37 ▫ To Disarm The System ...................25 ▫ Seat Belt Extender ......................37 Liftgate ...............................26 ▫ Driver And Right Front Passenger Supplemental Windows .............................27 R
ページ9に含まれる内容の要旨
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 9 A WORD ABOUT YOUR KEYS CAUTION! The double sided keys may be inserted into the locks with either side up. The keys for your new vehicle are An unlocked vehicle is an invitation to thieves. enclosed in a plastic bag with a bar code label affixed to 2 Always remove the key from the ignition and lock the front. The bar code can be used to order duplicate all the doors when leaving the vehicle unattended. keys from your dealer or a locksmith. If you rece
ページ10に含まれる内容の要旨
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE on the remaining transmitters will work. If the vehicle is continuously to signal that the vehicle has been immobi- moving 5 mph or more, then all the transmitter buttons lized. If the Security Light remains on during vehicle are disabled for all keys. operation, it indicates a fault in the system electronics. If this option was ordered, all of the keys provided with NOTE: The Sentry Key Immobilizer System is not your new vehicle have been program
ページ11に含まれる内容の要旨
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 consists of programming a blank key to the vehicle 3. Insert a blank Sentry Key into the ignition and switch electronics. A blank key is one which has never been the ignition to the ON position within 60 seconds of programmed and needs to be cut. having removed the second key. After 10 seconds, a single chime will sound. The Security Light will stop 2 NOTE: When having the Sentry Key System serviced, flashing, then turn on for 3 seconds; then turn
ページ12に含まれる内容の要旨
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Changes or modifications not expressly ap- proved by the party responsible for compliance could void the user’s authority to operate the equipment. IGNITION AND STEERING LOCK In the LOCK position, the steering and ignition systems are locked to provide anti-theft protection for your ve- hicle. It may be difficult to turn the key from the LOCK position when starting your vehicle, if the steering wheel is locked. Move the steering wheel left and
ページ13に含まれる内容の要旨
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 NOTE: The steering wheel will lock when the key is The interior lights will remain on for 30 seconds after the removed, and the steering wheel is turned around 115 last door is closed, or until all doors are closed and either degrees clockwise or 65 degrees counterclockwise from the ignition is turned to the ON position or a key fob the center position. LOCK button is pressed. 2 Ignition Accessory Delay Feature There is also a battery saver feature
ページ14に含まれる内容の要旨
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Power Door Locks WARNING! For personal security and safety in the event of an accident, lock the vehicle doors as you drive as well as when you park and leave the vehicle. WARNING! When leaving the vehicle always remove the key fromtheignitionlock,andlockyourvehicle.Donot leave children unattended in the vehicle, or with access to an unlocked vehicle. Unsupervised use of vehicle equipment may cause severe personal inju- ries and death.
ページ15に含まれる内容の要旨
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 As a safety feature the doors will not lock when using the door lock switches during the following conditions: • The driver’s door is open while the key is in the 2 ignition. Automatic Door Locks If this feature is enabled, your door locks will lock automatically when the vehicle’s speed exceeds 15 mph (24 km/h). This feature is enabled when your vehicle is shipped from the assembly plant and can be disabled by using the following procedure: Vehicle
ページ16に含まれる内容の要旨
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Within 10 seconds, cycle the key from the OFF position • The doors of the vehicle must be locked automatically to the ON position four times; ending in the ON position by the Automatic Door Lock feature. ( Do not start the engine ). • The vehicle is in P (Park) and the ignition switch is in 5. Within 30 seconds, press the driver’s door lock switch any key position. in the LOCK direction. This feature will not operate if any of the conditions 6. A
ページ17に含まれる内容の要旨
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 3. Insert the key into the ignition. Child Protection Door Lock To provide a safer environment for children riding in the 4. Within 10 seconds, cycle the key from the OFF position rear seat, the rear doors of your vehicle have the child- to the ON position four times ending in the ON position protection door lock system. 2 (do not start the engine). 5. Within 30 seconds, press the driver’s door lock switch in the UNLOCK direction. 6. A single chime
ページ18に含まれる内容の要旨
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened fromtheoutsidewhenthechildprotectionlocksare engaged. NOTE: After setting the child protection door lock system, always test the door from the inside to make certain it is in the desired position. NOTE: For emergency exit with the system engaged, To use the system, open each rear door and slide the move the door lock switch to the UNLOCK posit
ページ19に含まれる内容の要旨
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 REMOTE KEYLESS ENTRY NOTE: The line of transmission must not be blocked with metal objects. To unlock the doors and liftgate: 2 Press and release the UNLOCK button on the key fob once to unlock only the driver’s door or twice to unlock all the doors and liftgate. When the UNLOCK button is pressed, the illuminated entry will initiate, and the parking lights will flash on twice. The system can be programmed to unlock all the doors upon the first UNLOC
ページ20に含まれる内容の要旨
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Release both buttons at the same time. Horn Chirp Programming The horn chirp feature will be shipped from the assembly 4. Test the feature while outside of the vehicle, by plants activated. If desired this feature can be disabled by pressing the LOCK/UNLOCK button on the keyfob. using the following procedure: NOTE: Pressing the LOCK button on the keyfob while 1. Press and hold the LOCK button on the key fob. you are inside the vehicle will activa
