American Standard MOMENTS T506.50Xの取扱説明書

ページ1に含まれる内容の要旨

Installation
Instructions
MOMENTS
T506.50X
BATH/SHOWER TRIM KIT
Thank you for selecting American-Standard...the benchmark
of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin.
Certified to comply with ANSI A112.18.1
M968951 Rev. 1.4
Recommended Tools
Flat Blade Screwdriver
Adjustable Wrench
Plumbers' Putty or Caulking Channel Locks
Pipe Wrench
Phillips Screwdriver
ROUGHING-IN DIMENSIONS
To assure proper po

ページ2に含まれる内容の要旨

INSTALL VALVE TRIM 1 PLSTER Figure 1. Remove plaster guard from valve. Push CAP (1) GUARD 1 over VALVE CARTRIDGE (2) until seated against stop. Figure 2. Push ESCUTCHEON HOLDER (3) onto CAP (1) and attach with LONG SCREWS (4). Mount ESCUTCHEON SUPPORT (5) to ESCUTCHEON HOLDER (3) with 4 SHORT SCREWS (6). 2 Figure 1. Figure 3. Align PINS (7) on back side of ESCUTCHEON (8) with the FOUR HOLES (9) in ESCUTCHEON SUPPORT (5) and press ESCUTCHEON (8) flush against finished wall. 9 5 1 3 7 5 8 4 Figure

ページ3に含まれる内容の要旨

0 1 ADJUST HOT LIMIT STOP 3 "RED RING"- HOT LIMIT SAFETY STOP HOT LIMIT SAFETY STOP ADJUSTMENT By restricting handle rotation and limiting the amount 1 of hot water allowed to mix with the cold, the HOT LIMIT SAFETY STOP reduces risk of accidental scalding. To set the maximum hot water temperature of your faucets, all "A" you need to do is adjust the setting on the HOT LIMIT SAFETY STOP. "A" ADJUSTMENT WHEN "B" "B" Use a flat blade screwdriver or your fingers to pull WATER I