ページ1に含まれる内容の要旨
KPS-CC
CABLE CROSSOVER
Questions?
Call our toll free Keys Fitness Helpline
1-800-683-1236
M A N U A L
O W N E R ’ S
ページ2に含まれる内容の要旨
THANK YOU for making this Power System unit a part of your exercise program. Keys Fitness and our Power System Series assures the very best in value, appearance, durability and biomechanics. This manual will guide you through the assembly process. If at any time you are having trouble with the assembly or use of this product, then please contact us at our Keys Fitness Helpline. We have trained service technicians on site to take care of you, our valued customer. REGISTRATION CARD To avoid unn
ページ3に含まれる内容の要旨
BEFORE YOU START Prior to assemby, remove components from the box and verify that all the listed parts were supplied. SAFETY INFORMATION WARNING! Before using this unit or starting any exercise program, consult your physician. This is especially important for persons over the age of 35 and/or persons with pre-existing health problems. Keys Fitness Products LP assumes no responsibility for personal injury or property damage sustained by or through the use of this product. It is the owner’s re
ページ4に含まれる内容の要旨
ASSEMBLY NOTE: Hand tighten bolts and nylon nuts until STEP 8. STEP 1 Attach Middle Base (2) to Left Rear Upright (4) and Inner Base (1) using Bolts (42), Washers (53) and Nylon Lock Nuts (54).
ページ5に含まれる内容の要旨
ASSEMBLY NOTE: Hand tighten bolts and nylon nuts until STEP 8. STEP 2 Attach Middle Base (2) to Right Rear Upright (3) and Inner Base (1) using Bolts (42), Washers (53) and Nylon Lock Nuts (54).
ページ6に含まれる内容の要旨
ASSEMBLY NOTE: Hand tighten bolts and nylon nuts until STEP 8. STEP 3 NOTE: Before completing any other steps, you should position each side of the unit where it will stay once fully assembled such that the total length is 12 feet long. This will keep you from having to move the unit once it is loaded with weights. Slide Weight Bumpers (38) and Guide Rods (9) into holes of Middle Base (2). Slide quantity 9 of the 10 lb plates (33) onto guide rods. Then slide quantity 10 of the 5 lb plates
ページ7に含まれる内容の要旨
ASSEMBLY NOTE: Hand tighten bolts and nylon nuts until STEP 8. STEP 4 Slide Left Slide Frame (6) onto Slide Guide Tube (5) as shown and lock into one of the holes in tube. Attach Slide Guide Tube (5) to Inner Base (1) with Bolt (41), Washers (53) and Nylon Lock Nut (54). Slide Top Frame (8) onto Guide Rods (9) and Slide Guide Tube (5) and connect as shown.
ページ8に含まれる内容の要旨
ASSEMBLY NOTE: Hand tighten bolts and nylon nuts until STEP 8. STEP 5 Slide Right Slide Frame (7) onto Slide Guide Tube (5) as shown and lock into one of the holes in tube. Attach Slide Guide Tube (5) to Inner Base (1) with Bolt (41), Washers (53) and Nylon Lock Nut (54). Slide Top Frame (8) onto Guide Rods (9) and Slide Guide Tube (5) and connect as shown.
ページ9に含まれる内容の要旨
ASSEMBLY NOTE: Hand tighten bolts and nylon nuts until STEP 8. STEP 6 Slide Top Cross Tube (11) into both sides of the Top Frame (8) and secure as shown. Note: two people will be needed to complete this step safely. Connect Chin-Up Handle (16) to Top Cross Tube (11) using Bolts (48), Washers (53) and Nylon Lock Nuts (54).
ページ10に含まれる内容の要旨
ASSEMBLY NOTE: Hand tighten bolts and nylon nuts until STEP 8. STEP 7 Insert Cable (15) and pulleys and secure as shown. NOTE: The weight stack is not shown for better viewing of cable instructions.
ページ11に含まれる内容の要旨
ASSEMBLY STEP 8 Attach Handle (10) to each side of frame and secure with Bolts (39) and Washers (51). TIGHTEN ALL BOLTS AND NUTS before continuing! Once all bolts and nuts are tightened, then attach Weight Shrouds (12) with Allen Bolts (49) and Washers (52).
ページ12に含まれる内容の要旨
PARTS LIST # DESCRIPTION QTY 1 inner base 2 2 middle base 2 3 right rear upright 1 4 left rear upright 1 5 slide guide tube 2 6 left slide frame 1 7 right slide frame 1 8 top frame 2 9 guide rod 4 10handle 2 11 top cross tube 1 12 weight shroud 4 13 double pulley block 2 14 swivel pulley block 2 15 cable 2 16 chin-up handle 1 17 selector rod 2 18 jam nut 2 19 pop pin 2 20 4.5" pulley 6 21 3.5" pulley 10 22 lat strap 2 23 ankle strap 2 24 end cap 8 25 plastic sleeve 4 26 plug 4 27 mushroom plug 4
ページ13に含まれる内容の要旨
EXPLODED VIEW 11
ページ14に含まれる内容の要旨
KEYS FITNESS PRODUCTS, L.P. POWER SYSTEM SERIES LIFETIME WARRANTY This Warranty applies in the United States and Canada to products manufactured or distributed by Keys Fitness Products, LP (“Keys”) under the KEYS brand name. The warranty period to the origi- nal purchaser is lifetime of the original purchaser. Keys warrants that the Product you have purchased for non-commercial, personal, family, or househould use from Keys or from an authorized Keys reseller is free from defects in materials o
ページ15に含まれる内容の要旨
ページ16に含まれる内容の要旨
Keys Fitness Products, L.P. 4009 Distribution Drive, Suite 250 Garland, Texas 75041 Customer Service: 1-800-683-1236
