ページ1に含まれる内容の要旨
OPERATOR’S MANUAL
9.6 VOLT CORDLESS FLASHLIGHT
MODEL NO. FL96
Use only with recommended
battery pack and charging assembly
Your new cordless flashlight has been engineered and manufactured to Ryobi’s high standard for dependability, ease of
operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator's manual.
Thank you for buying a Ryobi flashlight.
SAVE THIS
ページ2に含まれる内容の要旨
INTRODUCTION CAUTION: Carefully read through this entire operator's manual before using your new flashlight. Pay close attention to the Rules For Safe Operation, Warnings and Cautions. Safety, performance and dependability have been given top priority in the design of this flashlight making it easy to maintain and operate. If you use your flashlight properly and only for it's intended use, you will enjoy years of safe, reliable service. SAFETY AND INTERNATIONAL SYMBOLS This operator’s manual des
ページ3に含まれる内容の要旨
RULES FOR SAFE OPERATION (Continued) ■ WHEN SERVICING USE ONLY IDENTICAL SAFETY RULES FOR FLASHLIGHTS REPLACEMENT PARTS. IMPORTANT SAFETY INSTRUCTIONS WARNING: FOR CHARGER Do not operate flashlight or charger near flammable ■ Before using battery charger, read all instructions and liquids or in gaseous or explosive atmospheres. Internal cautionary markings in this manual, on battery charger, sparks may ignite fumes. and product using battery charger. WARNING: CAUTION: Lens and bulb become hot du
ページ4に含まれる内容の要旨
OPERATION CHARGING FLASHLIGHT If your flashlight did not come in a cordless kit with other CAUTION: cordless products, a battery pack and charging assembly When placing battery pack in your flashlight, be sure raised were not included. If you decide to purchase a battery pack, ribs on battery pack aligns with groove inside light handle request recommended battery pack part number 1311146. and latches snap in place properly. Improper assembly of If you decide to purchase a charging assembly, requ
ページ5に含まれる内容の要旨
OPERATION SWITCH See Figure 3. To turn your light on and off, depress switch trigger. 180° ROTATING HEAD See Figure 3. Your flashlight has the feature of rotating the head 180° in either direction. BULB REPLACEMENT SWITCH See Figure 4. TRIGGER When purchasing replacement bulb, request recommended 180° ROTATING HEAD part number 981258-003. TO REPLACE BULB: ■ Remove battery pack from flashlight. ■ Remove lens cover by turning cover in counterclockwise direction, then remove cover. ■ Remove old bu
ページ6に含まれる内容の要旨
1 . 8 E 0 L 0 . C 8 MAINTENANCE DO NOT abuse power tools. Abusive practices can damage tool as well as workpiece. WARNING: When servicing, use only identical replacement parts. WARNING: Use of any other part may create a hazard or cause product damage. Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. WARNING: Do not a
ページ7に含まれる内容の要旨
NOTES Page 7
ページ8に含まれる内容の要旨
OPERATOR'S MANUAL 9.6 VOLT CORDLESS FLASHLIGHT MODEL NO. FL96 • SERVICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Ryobi Authorized Service Center. Be sure to provide all pertinent facts when you call or visit. Please call 1-800-525-2579 for your nearest Ryobi Authorized Service Center. You can also check our web site at www.ryobitools.com for a complete list of Authorized Service Centers. • MODEL NO. AND SERIAL NO. Th