ページ1に含まれる内容の要旨
FM/MW/LW Compact Disc Player CDX-M700R/CDX-M600R
3-047-694-12 (1)
FM/MW/LW
Compact Disc
Player
GB
Operating Instructions
ES
Manual de instrucciones
SE
Bruksanvisning
PT
Manual de instruções
RU
Инструкция по эксплуатации
For installation and connections, see the supplied installation/connections
manual.
Para obtener información sobre la instalación y las conexiones, consulte el manual
de instalación/conexiones suministrado.
Vi hänvisar till det medföljande häftet angående montering/anslutningar.
ページ2に含まれる内容の要旨
Welcome ! Precautions Thank you for purchasing the Sony Compact Disc Player. This unit lets you enjoy a variety of features using the following controller 1 CLASS accessories: LASER PRODUCT Supplied accessory Card remote commander This label is located on the bottom of the RM-X95 (for the CDX-M700R) chassis. RM-X96 (for the CDX-M600R) Optional accessory Rotary commander RM-X4S CAUTION INVISIBLE LASER RADIATION WHEN OPEN DO NOT STARE INTO BEAM OR In addition to the CD playback and radio VIEW DIR
ページ3に含まれる内容の要旨
Notes on discs Notes on CDs If you use the discs explained below, the sticky residue can cause the CD to stop spinning and A dirty or defective disc may cause sound may cause malfunction or ruin your discs. dropouts while playing. To enjoy optimum sound, handle the disc as follows. Do not use second-hand or rental CDs that Handle the disc by its edge. To keep the disc have a sticky residue on the surface (for clean, do not touch the surface. example, from peeled-off stickers or from ink, or glue
ページ4に含まれる内容の要旨
Table of Contents Location of controls ................................................. 6 DAB Overview of DAB .............................................. 23 Getting Started Basic operations of DAB .................................. 24 Resetting the unit ................................................ 8 Presetting DAB services automatically — BTM .......................................................... 25 Security release settings ..................................... 8 Presetting DAB serv
ページ5に含まれる内容の要旨
Location of controls OPEN/CLOSE Card remote OFF DSO commander MENU DISC LIST SEEK SEEK SOURCE DISC SOUND ENTER PTY DSPL AF/TA MODE ATT VOL Refer to the pages listed for details. 1 OFF button 8, 10 qa M/m (PRST/DISC +/–) buttons 9, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22, 2 MENU button 9, 11, 12, 13, 14, 15, 16, 23, 24, 25, 26, 27, 28, 30, 31, 35, 36 17, 19, 21, 23, 25, 27, 28, 30, 31, 35, 36 During CD/MD playback: 3 SOURCE (TUNER/CD/MD) button Disc change 11 8, 10, 11, 14, 16, 17, 24, 28, 29,
ページ6に含まれる内容の要旨
LIST SOUND M L P Y O T Location of controls Security side Operation side DISC SOURCE DSO REP SHUF DISC 12 3 4 5 6 OFF AF TA CLOSE CDX-M700R/M600R 6 S D P D E ENTER MENU
ページ7に含まれる内容の要旨
The corresponding buttons of the unit * Warning when installing in a car control the same functions as those on the without ACC (accessory) position on card remote commander. the ignition key switch Be sure to press (OFF) on the unit for two seconds to turn off the clock display after 17 Reset button 8 turning off the engine. 2 Main display window When you press (OFF) only momentarily, the clock display does not turn off and this 3 OPEN button 38 causes battery wear. 4qf Receptor for the card
ページ8に含まれる内容の要旨
Turning the unit on/off Getting Started Turning on the unit Press (SOURCE) or insert a CD in the unit. For details on operation, refer to page 10 (CD/MD) and page 16 (radio). Resetting the unit Turning off the unit Before operating the unit for the first time or Press (OFF) to stop CD/MD playback or radio after replacing the car battery, you must reset MW/LW reception (the key illumination and the unit. display remains on.) Press the reset button with a pointed object, Press (OFF) for two second
ページ9に含まれる内容の要旨
3 Press ,. How to use the menu This unit is operated by selecting items from a menu. To select, first enter the menu mode and choose M/m (up/down), or choose
ページ10に含まれる内容の要旨
When the last track on the CD is CD Player over CD/MD Unit (optional) The track number indication returns to “1,” and playback restarts from the first track of the CD. In addition to playing a CD with this unit alone, you can also control external CD/MD To Press units. Stop playback (OFF) If you connect an optional CD unit with the Eject the CD (OPEN/CLOSE) then Z CD TEXT function, the CD TEXT information will appear in the display when you play a CD TEXT disc. Playing a CD or MD (with optional
ページ11に含まれる内容の要旨
After you select the desired item, the display Locating a specific track will automatically change to the Motion — Automatic Music Sensor (AMS) Display mode after a few seconds. In the Motion Display mode, all the items are During playback, press < or , scrolled in the display one by one in order. momentarily for each track you want to skip. Note If you use personalised labels, they will always DISC , (>) : SEEK SEEK take priority over the original CD TEXT < (.) : To locate SOURCE To locate info
ページ12に含まれる内容の要旨
Playing tracks repeatedly Playing tracks in random — Repeat Play order — Shuffle Play The CD in the main unit will automatically You can select: repeat itself when it reaches the end. For repeat •Shuf 1 — to play the tracks on the current play, you can select: disc in random order. •Repeat 1 — to repeat a track. •Shuf 2 — to play the tracks in the current •Repeat 2 — to repeat a disc in the optional optional CD/MD unit in random order. CD/MD unit. •Shuf All — to play all the tracks in all the op
ページ13に含まれる内容の要旨
Tips • To erase or correct a name, enter “ ” (under- Labelling a CD — Disc Memo bar) for each character. • There is another way to start labelling a CD. Press (For a CD unit with the custom file function) (LIST) for two seconds instead of steps 2 and 3. You can also complete the operation by pressing You can label each disc with a personalised (LIST) for two seconds instead of step 5. name. You can enter up to eight characters for a disc. If you label a CD, you can locate the disc by name (page
ページ14に含まれる内容の要旨
Erasing the disc memo Locating a disc by name 1 Press (SOURCE) repeatedly to select — List-up (For a CD unit with the custom “CD.” file function or an MD unit) 2 Press (MODE) repeatedly to select the CD You can use this function for discs that have unit with the custom file function. been assigned a custom name. For more information on disc memo names, refer to “Labelling a CD” (page 13). 3 Press (MENU), then press M or m repeatedly until “Name Del” appears. 1 Press (LIST). The name assigned to
ページ15に含まれる内容の要旨
Playing specific tracks only Selecting specific tracks You can select: •“Bank on” — to play the tracks with the for playback “Play” setting. — Bank •“Bank inv” (Inverse) — to play the tracks with the “Skip” setting. (For a CD unit with the custom file function) If you label the disc, you can set the unit to 1 During playback, press (MENU), then skip or play the tracks of your choice. press M or m repeatedly until “Bank” appears. 1 Start playing the disc you want to label. 2 Press , repeatedly u
ページ16に含まれる内容の要旨
Memorising only the Radio desired stations You can preset up to 18 FM stations (six each for FM1, FM2, and FM3), up to 6 MW stations, and up to 6 LW stations in the order of your Memorising stations choice. automatically 1 Press (SOURCE) repeatedly to select the — Best Tuning Memory (BTM) tuner. The unit selects the stations with the strongest signals and memorises them in the order of 2 Press (MODE) repeatedly to select the their frequencies. You can store up to six band. stations on each band
ページ17に含まれる内容の要旨
If FM stereo reception is poor Receiving the memorised — Monaural Mode 1 During radio reception, press (MENU), stations then press M or m repeatedly until “Mono” appears. 1 Press (SOURCE) repeatedly to select the tuner. 2 Press , until “Mono on“ appears. The sound improves, but becomes 2 Press (MODE) repeatedly to select the monaural (“ST” disappears). band. 3 Press (ENTER). 3 Press M (preset up) or m (preset down) repeatedly to receive the stations in the To return to normal mode, select order
ページ18に含まれる内容の要旨
Tip The Motion Display mode can be turned off. (See “Changing the sound and display settings” on RDS page 35.) Overview of the RDS Retuning the same function programme automatically — Alternative Frequencies (AF) Radio Data System (RDS) is a broadcasting service that allows FM stations to send The Alternative Frequencies (AF) function additional digital information along with the automatically selects and retunes the station regular radio programme signal. Your car with the strongest signal in a
ページ19に含まれる内容の要旨
Changing the display item Listening to a regional programme Each time you press (AF/TA), the item changes The “REG on” (regional on) function lets you as follows: stay tuned to a regional programme without being switched to another regional station. B AF on B TA on B AF TA on* (Note that you must turn the AF function on.) AF TA off b The unit is factory preset to “REG on,” but if * Select this to turn on both the AF and TA you want to turn off the function, do the functions. follo
ページ20に含まれる内容の要旨
Presetting the volume of traffic Listening to traffic announcements You can preset the volume level of the traffic announcements announcements beforehand so you won’t miss the announcement. When a traffic The Traffic Announcement (TA) and Traffic announcement starts, the volume will be Programme (TP) data lets you automatically automatically adjusted to the preset level. tune in an FM station that is broadcasting traffic announcements even if you are listening to other programme sources. 1 Selec
