ページ1に含まれる内容の要旨
2-103-394-12(2)
Super Audio CD
Player
US
Operating Instructions __________________________
FR
Mode d’emploi ________________________________
SCD-C2000ES
©2004 Sony Corporation
ページ2に含まれる内容の要旨
WARNING This equipment has been tested and found to comply WARNING with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to To prevent fire or shock hazard, do not provide reasonable protection against harmful expose the unit to rain or moisture. interference in a residential installation. This To avoid electrical shock, do not open equipment generates, uses, and can radiate radio the cabinet. Refer servicing to qualified frequency
ページ3に含まれる内容の要旨
Table of Contents Features of the player ....................................................................................4 Compatible Disc Types .................................................................................4 About the Super Audio CD ...........................................................................5 Getting Started Inserting batteries into the remote .................................................................6 Hooking Up the Audio Components ...............
ページ4に含まれる内容の要旨
Features of the player Compatible Disc Types This player is designed to play back 2-channel You can play the following types of discs on this and Multi-channel Super Audio CDs, and player. conventional CDs, and provides the following Super Audio CDs features: Audio CDs Mounted with a Discrete Dual Laser Optical This player cannot play the following discs. If Pickup, capable of reading a Super Audio CD you try to play them, the error message “TOC or conventional CD depending on the E
ページ5に含まれる内容の要旨
An SA-CD layer consists of the 2 channel area or the multi-channel area. About the Super Audio CD 2 channel area: An area in which 2 channel Super Audio CD is a new high-quality audio stereo tracks are recorded disc standard where music is recorded in the Multi-channel area: DSD (Direct Stream Digital) format An area in which multi- (conventional CDs are recorded in the PCM channel (up to 5.1 channels) format). The DSD format, using a sampling tracks are recorded frequency 64 times highe
ページ6に含まれる内容の要旨
Hooking Up the Audio Getting Started Components Inserting batteries into Connect the Super Audio CD player to an audio the remote component. Be sure to turn off the power of all components before making connections and Insert two R6 (size-AA) batteries into the connect securely to prevent noise. battery compartment with the + and – correctly oriented to the markings. When using the Connecting a multi-channel remote, point it at the remote sensor on the player. amplifier When you have
ページ7に含まれる内容の要旨
Getting Started Connecting a stereo amplifier or MD deck ANALOG DIGITAL(CD) IR REMOTE 2CH OUT 5.1CH OUT OUT FRONT SURR CENTER COAXIAL OPTICAL When you connect a stereo amplifier or make an L L IR IN analog connection with an MD deck, connect the R R player and the component through the SUB WOOFER ANALOG 2CH OUT jacks. Use an audio connecting cord for this connection. Be sure to match the color-coded pin to the appropriate jacks: white (left) to white and red (right) to red. Audio connecti
ページ8に含まれる内容の要旨
To connect through the DIGITAL Connecting a digital (CD) OUT COAXIAL connector component Use a coaxial digital cable to connect the audio When you connect an MD deck or another components equipped with coaxial digital input digital component through the DIGITAL (CD) connectors. OUT connectors, you can make a digital Coaxial digital cable (not supplied) recording. To connect through the DIGITAL (CD) OUT OPTICAL connector Use an optical digital cable for this connection. ANALOG DIGITAL(CD)
ページ9に含まれる内容の要旨
Playing Discs When using another Sony CD player in conjunction with this Playing Discs player Playing a Disc You can set the supplied remote to be effective on this player only by changing the command The operations for normal play and the basic mode of the remote. operations during play are explained below. To set the command mode of the 1 Turn on the amplifier. Turn down the volume level to the lowest. remote 2 Select the player position using the If the other player’s command mode can
ページ10に含まれる内容の要旨
7 Press N. Selecting the playback layer Playback starts from the first track. If you want to start playing from a specific track, When playing a hybrid disc with an SA-CD turn l AMS L (or press ./> layer and a CD layer (page 5), you can select the on the remote repeatedly) to select the track layer you want to listen to. Also, since both number before pressing N. layers are on one side, it is not necessary to turn the disc over. The factory setting is “SEL SA– 8 Adjust the volume on the
ページ11に含まれる内容の要旨
Playing Discs 4 Turn l AMS L (or press ./> on the remote) to select the desired Using the Display playback area. The display window shows various information 5 Press l AMS L (or ENTER on the about the disc or track being played. This section remote). describes the current disc information and Note information that appears for each play status. The multi-channel playback area is automatically selected whenever you start playback because “SEL– Mch” (multi-channel playback area) is the fact
ページ12に含まれる内容の要旨
While playing a disc Displaying the information Press TIME/TEXT repeatedly. TEXT discs contain information, such as the When the player detects a Multi-channel Super disc name or artist name, as well as the audio Audio CD, the channel information appears for signals. This player can display the disc name, a few seconds after the track title appears. artist name, and current track name as TEXT Playing time of the current track information. When the player detects a TEXT disc, “TEXT” appears
ページ13に含まれる内容の要旨
Playing Discs Turning off the information in Replacing Discs While the display Playing a Disc Press DISPLAY MODE on the remote. —Ex-Change Each time you press the button while playing a disc, the display turns off and on alternately. You can open the disc tray while playing a disc Even when the display is turned off, it will turn so that you can check what discs are to be played on when certain buttons are pressed, and then next and replace discs without interrupting play turn off again
ページ14に含まれる内容の要旨
Locating a Particular Playing Tracks Point in a Track Repeatedly — Repeat Play You can locate a particular point in a track during play or play pause. You can play an entire disc or a specific track Locating a point Do the following: repeatedly. This function can be used with While monitoring the Press and hold m/M 1DISC Shuffle Play to repeat all the tracks in sound (Search) during play. random order (page 15), or with Program Play to By observing the Press and hold m/M repeat all the t
ページ15に含まれる内容の要旨
Playing Discs Playing Tracks in Random Creating Your Own Order Program — Shuffle Play —Program Play When Shuffle Play is selected, the player will You can pick out the tracks that you like and play all the tracks on all the discs or on a specific specify the playback order in a program disc in random order. containing up to 32 steps. 1 Press PLAY MODE repeatedly (or PROGRAM on the remote) in stop Shuffle Play on all discs mode until “PGM” appears in the You can play all the tracks on all t
ページ16に含まれる内容の要旨
To resume Continuous Play Enjoying a Multi-channel Press PLAY MODE repeatedly (or CONTINUE on the remote) in stop mode until “SHUF” and Super Audio CD “PGM” disappear. Tip — Multi-channel management The program remains even after Program Play ends. function Press N to play from the beginning of the program again. The program remains even if you stop play. This player is equipped with a Multi-channel Notes management function that sets the playback If you turn off the player, disconnect
ページ17に含まれる内容の要旨
Playing Discs About “Large” or “Small” speaker Selecting the playback mode An “L” speaker is a speaker that can reproduce bass frequencies plentifully. If 1 Press MENU on the player. you select “S” for the surround speakers, 2 Turn l AMS L (or press ./> the bass frequencies will come from the on the remote repeatedly) until the front speakers and/or sub woofer. desired channel mode appears in the For normal use, select “Mch DIRECT” or display. set all the speakers to “L” (ex. “5– 2chSP
ページ18に含まれる内容の要旨
Note Adjusting the output level When you set the sub woofer to “––” in the Multi- channel mode (page 17), “SW BAL” cannot be balance of each speaker adjusted (“NOT IN USE” appears). Similarly, You can adjust the following items in the case of “CNTR BAL” or “SURR BAL” cannot be Multi-channel mode: adjusted (“NOT IN USE” appears) when you set the corresponding speaker to “––”. SURR BAL The relative output level balance between the 7 Press l AMS L. front speakers (FRONT L/R) and the surround
ページ19に含まれる内容の要旨
Playing Discs 3 Press ENTER. Adjusting the speaker The test tone issues from the speakers in distance sequence with the speaker type appearing in the display. You can adjust the speaker distance when the connected amplifier does not have the setting 4 Press ./> repeatedly until the menu for speaker distance. If the amplifier has desired item appears in the display. this function, we recommend that you set the Select the item from “SURR BAL”, speaker distance on the amplifier. This setti
ページ20に含まれる内容の要旨
Note 7 Press l AMS L (or ENTER on the Speaker distance cannot be adjusted in the following remote). cases. The player status returns to Step 4. – When the player is reading the disc information of Repeat Steps 4 through 7 for more CD (or the CD area of Super Audio CD) adjustments. – When the player is reading the 2 channel area of Super Audio CD 8 Press MENU on the player after you finish adjusting. 1 Press MENU on the player. The display returns to the normal display. 2 Turn l AMS L (or pr
