ページ1に含まれる内容の要旨
VIII. Hardware Specification
Ken-A-Vision
The following gives information on the technical and hardware
specifications of your Ken-A-Vision M Eye. Please note that the
M Eye Digital
information mentioned here may not be exactly the same with your
Ken-A-Vision M Eye.
Camera
Camera as specification is subject to change without notice.
Camera Type 1.3 M Eye
Cable 2 meter USB
Aperture Range F2.8 and 8.0
Users Manual
Resolution 1280 x 960, 1024 x 768, 640 x 480
Auto Exposur
ページ2に含まれる内容の要旨
7.2 Frequently Asked Questions (FAQ): Contents Following are some basic troubleshooting tips regarding Ken-A- Vision M Eye hardware or software problems: Symptom Solution Windows • Check connection if Ken-A-Vision M Eye is properly I. Parts of Ken-A-Vision M Eye does not plugged-in. Unplug and replug the camera. detect my Camera
p.3 Ken-A- • Check the BIOS Setup of the computer if there is any settings Vision that can enable or disable the USB port or controller. M
ページ3に含まれる内容の要旨
VII. Safety & FAQ Ken-A-Vision M Eye Introduction This chapter provides some basic troubleshooting when you encounter problems installing or using the camera. It is important that you read I. Parts of Ken-A-Vision M Eye first the previous chapters and the bundled software documentation before starting to find the problem. If this manual was not able to fix your problem, please contact the dealer or manufacturer for customer support. Snap Button Power ON/OFF Button Flash Mode B
ページ4に含まれる内容の要旨
6.3 Icons II. User Interface Description Cutting Room ; Save image, divide video file and extract sound. 2.1 Buttons There are 4 buttons on the camera Dark Room ; Control the Brightness, Contrast and Hue. Special Effects ; Swirl, Spherize, Brighten, Tile, Relief, Ripple images. To delete Photos from camera memory, press and hold the Snap and Mode buttons Simultaneously for 3 Text Animator ; Put the text in the moving images. seconds. Transitions ; S
ページ5に含まれる内容の要旨
VI. Video Wave III 6.1 Installing Video Wave Operation Mode Button Continued
A. Make sure the USB cable is not connected to your computer. Insert the ! Single shot High quality with timer (1024 x 768) CD into the CD ROM of your computer. The software is self-loading. ! Single shot Super High quality with timer ( 1280 x 960) NOTE: The M Eye driver must be installed to use the camera with your ! Multiple shot ( 640 x 480) computer. ! Video clip ( 320 x 240 ) ! Audio recording
ページ6に含まれる内容の要旨
When the operation mode button is pressed once, it toggles the mode of operation. When the camera is first turned on, it is in the default state which is single shot (High quality). Each time the operation mode Add interesting effects in your photos. button is pressed, the mode is toggled as depicted below: Use your photo in numerous fun and practical projects. Single shot Single shot Single shot Self-Timer ( High (Super High ( High ( Normal ) Quality ) Quality) Quality
ページ7に含まれる内容の要旨
V. Photo Suite III LCD Icons Continued Indicates the focus is right. Otherwise the icon flickers. 5.1 Installing Photo Suite III G. Make sure the USB cable is not connected to your computer. Insert Indicates the speaker is ON. Push Mode Button for more the CD into the CD ROM of your computer. The software is self- than 3 seconds to turn the speaker ON/OFF. loading. NOTE: The M Eye driver must be installed to use the camera with your computer. Indicates the sp
ページ8に含まれる内容の要旨
4.2 Vision Explorer Software Icons 2.3 System requirements: Capture a still photo Click to take a snapshot of the live image. Ken-A-Vision Drive Video Wave Photo Suite Capture a movie Win98, 2000, Click to record a movie of the current Hardware Same Same Win ME, XP camera view. Min. CPU Min. MMX 166 Same Camera Control P-II 266 The Camera Panel is used to show the current image by the camera. Main Memory Min. 32M Same Min. 64M Image Browser The Browser Panel allows you
ページ9に含まれる内容の要旨
IV. Installing Vision Explorer III. Software Installation 3.1 Ken-A-Vision M Eye Software consists of 5 software programs; Direct X, Photo Suite, Video Wave, Vision Explorer and Ken-A-Vision M Eye Driver. 3.2 Insert the Installation CD and the following should appear: 4.1 Installing Vision Explorer Software M. Make sure the USB cable is not connected to your computer. Insert the CD into the CD ROM of your computer. Your computer may ask you to reboot to initiate t
ページ10に含まれる内容の要旨
3.6 Checking the Device Installation 3.3 Click Install. (If Direct X 8.1 or higher is installed in your computer already Windows XP, the installation continues To check if the Ken-A-Vision M Eye has been installed: automatically). Your computer will restart after the installation of Direct X. After restarting, continue the installation process 1. Plug in M Eye Camera without selecting Direct X. 2. Click on Start, Settings, Control Panel. Software To Install 3. For Windows 98 use
