ページ1に含まれる内容の要旨
3-228-965-11 (1)
CD Radio
Cassette-Corder
Operating Instructions
CFD-E75
© 2001 Sony Corporation
ページ2に含まれる内容の要旨
Warning Information To prevent fire or shock hazard, For customers in the United States do not expose the player to rain This equipment has been tested and found to or moisture. comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordan
ページ3に含まれる内容の要旨
Basic Operations Table of contents Basic Operations Playing a CD .................................................. 4 Listening to the radio ...................................... 6 Playing a tape ................................................. 8 Recording on a tape ...................................... 10 The CD Player Using the display .......................................... 12 Locating a specific track ............................... 12 Playing tracks repeatedly (Repeat Play) ..........
ページ4に含まれる内容の要旨
Basic Operations Playing a CD 3 1, 2 Connect the supplied AC power cord (see page 24). 1 Press ZPUSH OPEN/CLOSE down to open the CD compartment and place the CD on the CD PUSH OPEN/CLOSE compartment. With the label side up 2 Close the lid of the CD compartment. PUSH OPEN/CLOSE 3 Press u (N on the remote). Display The player turns on (direct power-on) and plays all the tracks once. Track number Playing time 4
ページ5に含まれる内容の要旨
Basic Operations Use these buttons for additional operations Jog dial ZPUSH OPEN/CLOSE x VOLUME +, – u POWER To Do this adjust the volume Press VOLUME +, – (VOL +, – on the remote). stop playback Press x. pause playback Press u (X on the remote). Press the button again to resume play after pause. go to the next track Turn the jog dial clockwise. (On the remote, press >.) go back to the previous track Turn the jog dial counterclockwise. (On the remote, press ..) remove the CD Press ZPUSH OPEN/CLO
ページ6に含まれる内容の要旨
TUNE Listening to the radio 12 Connect the supplied AC power cord (see page 24). Display 1 Press RADIO BAND•AUTO RADIO PRESET until the band you want BAND appears in the display (direct power- on). AUTO PRESET Indicates an FM stereo 2 Hold down TUNE + or – until the broadcast frequency digits begin to change in the display. The player automatically scans the radio frequencies and stops when it finds a clear station. If you can't tune in a station, press the button repeatedly to change the freque
ページ7に含まれる内容の要旨
Basic Operations Use these buttons for additional operations POWER MODE VOLUME +, – Tip To Press If the FM broadcast is adjust the volume VOLUME +, – noisy, press MODE until (VOL +, – on the remote) “Mono” appears in the display and the radio will turn on/off the radio POWER play in monaural. To improve broadcast reception Reorient the antenna for FM. Reorient the player itself for AM. for FM for AM 7
ページ8に含まれる内容の要旨
Playing a tape 1 2 Connect the supplied AC power cord (see page 24). 1 Press xZ to open the tape With the side you want to play facing you compartment and insert a recorded tape. Use TYPE I (normal) tape only. Close the compartment. Display 2 Press n. The player turns on (direct power-on) and starts playing. 8
ページ9に含まれる内容の要旨
Basic Operations Use these buttons for additional operations POWER VOLUME +, – m, M xZ X To Press adjust the volume VOLUME +, – (VOL +, – on the remote) stop playback xZ fast-forward or rewind the tape m or M pause playback X Press the button again to resume play after pause. eject the cassette xZ turn on/off the player POWER 9
ページ10に含まれる内容の要旨
Recording on a tape 1 3 Connect the supplied AC power cord (see page 24). With the side you want to 1 Press xZ to open the tape record on facing you compartment and insert a blank tape. Use TYPE I (normal) tape only. 2 Select the program source you want to record. Display To record from the CD player, insert a CD (see page 4) and press x on the CD section. RADIO To record from the radio, tune in the station you want (see page 6). BAND AUTO PRESET 10
ページ11に含まれる内容の要旨
Basic Operations 3 Press z to start recording (n is depressed automatically). Use these buttons for additional operations POWER MODE n xZ X Tips To Press • Adjusting the volume or the stop recording xZ audio emphasis (see page 18) will not affect the pause recording X recording level. Press the button again to resume • If the AM program makes a recording. whistling sound after you've turn on/off the player POWER pressed z in step 3, press MODE to select the position of ISS (Interference Suppress
ページ12に含まれる内容の要旨
The CD Player Using the display Locating a specific track You can check information about the CD using the display. You can quickly locate any track on a CD using the number buttons on the remote. DSPL You can also find a specific point in ENT MEM a track while playing a CD. POWER STANDBY SLEEP (AC ONLY) CD/RADIO Number buttons MODE 0/10 10 VOL BAND TUNE FUNCTION TUNE ., > Checking the total track number and playing time Press DSPL•ENT MEM in stop mode. Total playing To locate Press time Total t
ページ13に含まれる内容の要旨
The CD Player To cancel Repeat Play Press MODE until “REPEAT” disappears Playing tracks from the display. repeatedly (Repeat Play) On the remote You can play tracks repeatedly in normal, • Use N instead of u. shuffle or program play modes (see page • When you’ve selected “REPEAT 1”, select the 14). track by pressing the number buttons. u x Jog dial MODE 1 Press x. “Cd” appears in the display. 2 Proceed as follows. To repeat Do this a single track 1 Press MODE until “REPEAT 1” appears. 2 Turn the
ページ14に含まれる内容の要旨
Playing tracks in Creating your own random order (Shuffle Play) program (Program Play) You can play tracks in random order. You can arrange the playing order of up to 20 tracks on a CD. u x MODE DSPL ENT MEM MODE Jog dial u x 1 Press x. “Cd” appears in the display. 1 Press x. 2 Press MODE until “SHUF” appears in “Cd” appears in the display. the display. 2 Press MODE until “PGM” appears in 3 Press u to start shuffle play. the display. To cancel Shuffle Play 3 Turn the jog dial to select the track
ページ15に含まれる内容の要旨
The CD Player On the remote 1 Press x. 2 Press MODE until “PGM” appears in the display. 3 Press the number buttons for the tracks you want to program in the order you want. 4 Press N. To cancel Program Play Press MODE until “PGM” disappears from the display. To check the order of tracks before play Press DSPL•ENT MEM. Every time you press the button, the track number appears in the programed order. To change the current program Press x once if the CD is stopped and twice if the CD is playing. Th
ページ16に含まれる内容の要旨
The Radio If a station cannot be preset automatically Presetting radio stations You need to preset a station with a weak signal manually. You can store radio stations into the player’s memory. You can preset up to 30 radio 1 Press RADIO BAND•AUTO PRESET to stations, 20 for FM and 10 for AM in any select the band. order. 2 Tune in a station you want. 3 Hold down DSPL•ENT MEM for 2 RADIO BAND seconds. AUTO PRESET DSPL 4 Select the preset number you want to Jog dial ENT MEM preset the new station o
ページ17に含まれる内容の要旨
The Radio Playing preset radio stations Once you've preset the stations, use the jog dial on the player or the number buttons on the remote to tune in to your favorite stations. RADIO BAND AUTO PRESET Jog dial 1 Press RADIO BAND•AUTO PRESET to select the band. 2 Turn the jog dial to tune in the stored station. On the remote 1 Press BAND until the band you want appears in the display. 2 Press the number button to tune in a stored station. To tune in a preset station over 10, press >10 first, th
ページ18に含まれる内容の要旨
The Audio Emphasis Selecting the audio emphasis (MEGA BASS) You can adjust the audio emphasis of the sound you are listening to. MEGA BASS Reinforcing the bass sound Press MEGA BASS. “MEGA BASS” appears in the display. To return to normal sound, press the button again. 18
ページ19に含まれる内容の要旨
The Timer The Timer 3 Press DSPL•ENT MEM. Setting the clock The clock starts from 00 seconds. “– –:– –” indication appears in the display until you set the clock. Tip The time display system: 12-hour system MENU DSPL AM 12:00 = midnight ALARM Jog dial ENT MEM PM 12:00 = noon Before you set the clock, connect the power source (see page 24). 1 Press MENU•ALARM until “CLOCK” appears in the display, then press DSPL•ENT MEM. The hour digit flashes. 2 Turn the jog dial to set the current hour. Then pr
ページ20に含まれる内容の要旨
4 Set the timer to the hour you want the Waking up to music music to start by turning the jog dial, then press DSPL•ENT MEM. You can wake up to music or a radio program at a preset time. Make sure you have set the clock (“Setting the clock” on page 19). MENU Set the minutes, then press DSPL•ENT ALARM MEM. DSPL STANDBY Jog dial ENT MEM 5 Set the timer to the hour and the minutes you want the music to go off. (Do as step 4.) 6 Turn the jog dial to set the volume, then press DSPL•ENT MEM. 7 Press S
