ページ1に含まれる内容の要旨
3-861-518-41 (1)
FM/MW/LW
Compact Disc
Player
EN
Operating Instructions
ES
Manual de instrucciones
P
Manual de instruções
S
Bruksanvisning
For installation and connections, see the supplied installation/connections
manual.
Para obtener información sobre la instalación y las conexiónes, consulte el manual
de instalación/conexiones suministrado.
Para a instalação e as ligações, consulte o manual de instalação/ligações
fornecido.
Vi hänvisar till det medföljande häftet angående montering/anslutning
ページ2に含まれる内容の要旨
Welcome ! Thank you for purchasing the Sony Compact Disc Player. This unit lets you enjoy a variety of features by using an optional rotary commander (RM-X4S). EN 2
ページ3に含まれる内容の要旨
Table of Contents Location of controls ................................................. 4 Other Functions Using the rotary commander .......................... 14 Adjusting the sound characteristics ............... 15 Getting Started Resetting the unit ................................................ 5 Attenuating the sound ..................................... 15 Detaching the front panel .................................. 5 Changing the sound and beep tone ............... 16 Setting the clock
ページ4に含まれる内容の要旨
Location of controls SOURCE MODE SENS/BTM PTY AF/TA 1 D-BASS OFF 2 SEEK SEL DSPL 3 AMS INTRO REPEAT SHUF RELEASE 1 2345 6 ATT OFF Refer to the pages for details. EN 1 SEEK/AMS (seek/Automatic Music !ª (+) (Ð) (volume/bass/treble/balance/ Sensor/manual search) button 7, 8, 9, fader control) buttons 6, 15 10, 13 !£ ATT button 15 2 SOURCE (source select) button 6, 8 !¢ Reset button (located on the front side of the unit hidden by the front panel) 5 3 MODE (band select) button 8 !° OFF button
ページ5に含まれる内容の要旨
Getting Started Notes • Be sure not to drop the panel when detaching it from the unit. • If you press (RELEASE) to detach the panel while Getting Started the unit is still on, the unit will turn off automatically to prevent the speakers from being damaged. • When you carry the front panel with you, put it in the supplied front panel case. Resetting the unit Attaching the front panel Before operating the unit for the first time or after replacing the car battery, you must reset Align part A of th
ページ6に含まれる内容の要旨
Setting the clock CD Player The clock has a 24-hour digital indication. Example: Set the clock to 10:08 1 Press (OFF) or (DSPL) during operation. Listening to a CD 2 Press (DSPL) for more than two seconds. Simply insert the CD. Playback starts automatically.
Labelled side up 100 The hour digit flashes. 1 Set the hour digits. to go forward to go back If a CD is already inserted, press (SOURCE)
repeatedly until “CD” appears. 1000 EN Elapsed playing time 2 Press (SEL) momentarily. TRACK CD
ページ7に含まれる内容の要旨
Getting Started/CD Player Locating a specific track — Automatic Music Sensor (AMS) Playing a CD in various During playback, press either side of modes (SEEK/AMS) momentarily. Searching for the desired track To locate succeeding tracks — Intro Scan SEEK AMS To locate preceding tracks Press (1) during playback. “INTRO” appears in the display. Locating a specific point in a track The first 10 seconds of all the tracks are played. — Manual Search When you find the desired track, press again. During
ページ8に含まれる内容の要旨
Memorising only the Radio desired stations You can store up to 6 stations on each band (18 for FM1, FM2 and FM3, 6 for each MW and LW) in the order of your choice. Memorising stations automatically 1 Press (SOURCE) repeatedly to select the tuner. — Best Tuning Memory (BTM) The unit selects the stations with the strongest 2 Press (MODE) repeatedly to select the signals and memorises them in the order of band. their frequencies. You can store up to 6 stations on each band (FM1, FM2, FM3, MW and LW
ページ9に含まれる内容の要旨
Radio/RDS Receiving the memorised RDS stations 1 Select the desired band (page 8). Overview of the RDS 2 Press the number button ((1) to (6)) momentarily where the desired station is function stored. The Radio Data System (RDS) is a If you cannot tune in a preset broadcasting service that allows FM stations to send additional digital information along with station the regular radio programme signal. Your car Press either side of (SEEK/AMS) stereo offers you a variety of services. Here are moment
ページ10に含まれる内容の要旨
Notes • “NO AF” and the station name flash alternately, Re-tuning the same if the unit cannot find an alternative station in the network. programme automatically • If the station name starts flashing after selecting a station with the AF function on, this indicates that — Alternative Frequencies (AF) no alternative frequency is available. Press (SEEK/AMS) while the station name is flashing The Alternative Frequencies (AF) function (within eight seconds). The unit starts searching automatically s
ページ11に含まれる内容の要旨
RDS Presetting the volume of traffic announcements Listening to traffic You can preset the volume level of the traffic announcements announcements beforehand so you won’t miss the announcement. When a traffic The Traffic Announcement (TA) and Traffic announcement starts, the volume will be Programme (TP) data let you automatically automatically adjusted to the preset level. tune in an FM station that is broadcasting traffic announcements even though you are listening to other programme sources.
ページ12に含まれる内容の要旨
Presetting RDS stations Locating a station by with the AF and TA data programme type When you preset RDS stations, the unit stores You can locate the station you want by each station’s data as well as its frequency, so selecting one of the programme types shown you don’t have to turn on the AF or TA below. function every time you tune in the preset Note station. You can select a different setting (AF, If the countries or regions where EON data is not TA, or both) for individual preset stations,
ページ13に含まれる内容の要旨
RDS Note You cannot use this function in some countries Setting the clock where no PTY (Programme Type selection) data is available. automatically 1 Press (PTY) during FM reception until The CT (Clock Time) data from the RDS “PTY” appears. transmission sets the clock automatically. PT During FM reception, press (2) while INFO pressing (SEL). The current programme type name appears “CT” is displayed, and the clock is set. if the station is transmitting PTY data. FM1 “- - - - -” appears if the re
ページ14に含まれる内容の要旨
By rotating the control (the SEEK/ AMS control) Other Functions You can connect an optional rotary commander (RM-X4S) with this unit. Using the rotary commander Rotate the control momentarily and The rotary commander works by pressing release it to: buttons and/or rotating controls. •Locate a specific track on a disc. Rotate and hold the control until you locate the specific point in a track, then release it to By pressing buttons (the SOURCE start playback. and MODE buttons) •Tune in stations a
ページ15に含まれる内容の要旨
Other Functions Other operations Rotate the VOL control to Adjusting the sound adjust the volume. Press (ATT) to attenuate the characteristics sound. You can adjust the bass, treble, balance and fader. Each source can store the bass and treble level settings independently. Press (OFF) to turn 1 Select the item you want to adjust by off the unit. pressing (SEL) repeatedly. Press (SEL) to adjust and select. VOL (volume) n BAS (bass) n TRE (treble) n BAL (left–right) n FAD (front–rear) 2 Adjust the
ページ16に含まれる内容の要旨
Additional Changing the sound and Information beep tone Boosting bass sound — D-bass You can enjoy clear and powerful bass sound. The D-bass function boosts the low frequency Precautions signal with a sharper curve than conventional bass boost. • If your car was parked in direct sunlight You can hear the bass line more clearly even if resulting in a considerable rise in the vocal sound is the same volume. You can temperature inside the car, allow the unit to emphasize and adjust the bass sound e
ページ17に含まれる内容の要旨
Other Functions/Additional Information Do not expose the discs to direct sunlight or heat sources such as hot air-ducts, or leave Maintenance them in a car parked in direct sunlight where there can be a considerable rise in the Fuse replacement temperature inside the car. When replacing the fuse, be sure to use one that matches the amperage described on the fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an interna
ページ18に含まれる内容の要旨
DSPL MODE SEL Dismounting the unit Attaching the label to the rotary commander You can control this unit with the optional rotary commander (RM-X4S). Release key Several labels are supplied with the rotary (supplied) commander. Attach the label that matches the functions of this unit and the mounting position of the rotary commander. µ After you mount the rotary commander, attach the label in the illustration below. µ EN µ 18 SEL MODE DSPL
ページ19に含まれる内容の要旨
Additional Information Specifications CD player section General System Compact disc digital audio Outputs Power aerial relay control system lead Signal-to-noise ratio 90 dB Power amplifier control Frequency response 10 – 20,000 Hz lead Wow and flutter Below measurable limit Tone controls Bass ±8 dB at 100 Hz Treble ±8 dB at 10 kHz Power requirements 12 V DC car battery Tuner section (negative ground) FM Dimensions Approx. 188 · 58 · 175 mm Tuning range 87.5 – 108 MHz (w/h/d) Aerial terminal Exte
ページ20に含まれる内容の要旨
Troubleshooting guide The following checklist will help you remedy the problems that you may encounter with your unit. Before going through the checklist below, check the connection and operating procedures. General Cause/Solution Problem •Adjust the volume with (+). No sound. •Set the fader control to the centre position for two-speaker systems. • The power cord or battery has been disconnected. The contents of the memory • The reset button has been pressed. have been erased. n Store the settin
